Search found 197 matches

by Flyer10
10 Nov 2019, 09:27
Forum: Community projects
Topic: Project FMC simplified for Project Airbus
Replies: 3340
Views: 3185176

Re: Project FMC simplified for Project Airbus

Strange, because I found the A32x_Sounds.ini file in my "PA A32x_Common" folder. I have that too but it was the xml sounds gauge that had no ini. I am using P3Dv4 and you have to copy A32x_XML_Sounds.gau and A32x_XML_Config.gau. The config gauge overwrites the 32 bit version but the xml s...
by Flyer10
09 Nov 2019, 12:34
Forum: Community projects
Topic: Project FMC simplified for Project Airbus
Replies: 3340
Views: 3185176

Re: Project FMC simplified for Project Airbus

I did another test but I added elevator trim =2.0. I did this because it's quite easy to get the aircraft in an out of trim state, especially coming off AP. This seems to make the aircraft fly more like the payware versions. Leaving the terrain on gives a weird flashing every 3-5 seconds, it flashes...
by Flyer10
08 Nov 2019, 10:10
Forum: Community projects
Topic: Project FMC simplified for Project Airbus
Replies: 3340
Views: 3185176

Re: Project FMC simplified for Project Airbus

-and the new FMC gauge keeps behaving strange. When I load the panel the gauge shows a splashscreen in blue font that disappears when I press any button. Display is now black. After eyery press on a button (n omatter which one) the dislpay "flashes" , showing content for a very short mome...
by Flyer10
05 Nov 2019, 07:11
Forum: Community projects
Topic: Project FMC simplified for Project Airbus
Replies: 3340
Views: 3185176

Re: Project FMC simplified for Project Airbus

I think the v speeds was related to not having a plan loaded. I had the flaps set though but I don't think it I also thing the VAPP and VREF is due to something not being done unless an approach is set in the FMC which I cannot do at nearly all airports. Maybe have the radar alt at 2500 set the vapp...
by Flyer10
04 Nov 2019, 18:37
Forum: Community projects
Topic: Project FMC simplified for Project Airbus
Replies: 3340
Views: 3185176

Re: Project FMC simplified for Project Airbus

I just tried a test flight. No problems with gauges or anything else on P3Dv4. I managed to set up up ok although for some reason the V speeds wouldn't insert but after a while they did. Take off and climb was fine, as was the descent which started better than it ever used too. Now we get to the bad...
by Flyer10
04 Nov 2019, 16:20
Forum: Community projects
Topic: Project FMC simplified for Project Airbus
Replies: 3340
Views: 3185176

Re: Project FMC simplified for Project Airbus

Fred, have you tried turning on the brightness? That got me when it was introduced on the V1 version.
by Flyer10
18 Aug 2018, 09:35
Forum: Community projects
Topic: Project FMC simplified for Project Airbus
Replies: 3340
Views: 3185176

Re: Project FMC simplified for Project Airbus

I don't use the SIDS and STARS at all, my ATC provides that, I was trying to find another way to trigger it, radar altitude, gear down or flaps full instead of the approach phase being selected. I think that would be better as it would show for everyone if they had to turn around or divert to anothe...
by Flyer10
16 Aug 2018, 15:58
Forum: Community projects
Topic: Project FMC simplified for Project Airbus
Replies: 3340
Views: 3185176

Re: Project FMC simplified for Project Airbus

It's all gone a bit quiet on here, I am looking to improve a few things I have always had trouble with. 1-Overspeed when light under 10000 feet 2-Aircraft will get stuck at 700fpm leading to over speed after you have been told to level off and then climb again leading to major overspeed 3-Aircraft w...
by Flyer10
31 Jul 2018, 07:40
Forum: Community projects
Topic: Project FMC simplified for Project Airbus
Replies: 3340
Views: 3185176

Re: Project FMC simplified for Project Airbus

It's mandatory for autoland IRL for the reasons you state. I don't think the sim distinguishes between different Cats, it seems to autoland on all of them. It should not autoland on CAT I IIRC.
by Flyer10
30 Jul 2018, 08:38
Forum: Community projects
Topic: Project FMC simplified for Project Airbus
Replies: 3340
Views: 3185176

Re: Project FMC simplified for Project Airbus

I get full flare with just AP1 on, I just assumed I must have missed something when copying across. IRL you should not even get the LAND come up and I believe there would be some kind of ECAS warning while on the ILS with just one AP on.
by Flyer10
28 Jul 2018, 11:14
Forum: Community projects
Topic: Project FMC simplified for Project Airbus
Replies: 3340
Views: 3185176

Re: Project FMC simplified for Project Airbus

I can still autoland with only 1 AP pressed in 2.0G, which file is the new code in? I want to make sure that it is copied across. Thanks.
by Flyer10
27 Jul 2018, 08:49
Forum: Community projects
Topic: Project FMC simplified for Project Airbus
Replies: 3340
Views: 3185176

Re: Project FMC simplified for Project Airbus

I don't think you can add waypoints without adding some other kind of FMC (I can tell you how if you have a Carenado Pro line system plane), changing active waypoints is easy, just add a popup of the default GPS into the panel.cfg and use that. It may already be there but I am not sure.
by Flyer10
25 Jul 2018, 10:14
Forum: Community projects
Topic: Project FMC simplified for Project Airbus
Replies: 3340
Views: 3185176

Re: Project FMC simplified for Project Airbus

I will check this evening as the A320 CFM is the only one I am flying at the moment, it's possible an install went wrong somewhere as there's so much copying required with all these updates. Edit - everything works exactly as it should for me. Normally this would be a font issue but I would think th...
by Flyer10
24 Jul 2018, 08:53
Forum: Community projects
Topic: Project FMC simplified for Project Airbus
Replies: 3340
Views: 3185176

Re: Project FMC simplified for Project Airbus

It's strange that the 2d lever moves correctly, isn't it a case of just copying that code to the VC? Anyway, it's not something I noticed in using it for many months as I look at my own axis to check flap position instead of the VC one. I was on 2.0G, I just didn't copy the .txt file across. Are the...
by Flyer10
23 Jul 2018, 09:02
Forum: Community projects
Topic: Project FMC simplified for Project Airbus
Replies: 3340
Views: 3185176

Re: Project FMC simplified for Project Airbus

It could be different between planes, I am on 2.0C (I didn't know there was an upgraded version) using the A320. It is not unprecedented, the ignition switch has never worked in the VC for me in any version or any plane but it seems to work for everyone else. I will double check when I am on the sim...
by Flyer10
22 Jul 2018, 09:07
Forum: Community projects
Topic: Project FMC simplified for Project Airbus
Replies: 3340
Views: 3185176

Re: Project FMC simplified for Project Airbus

I also found an issue. I was landing using autoland feature. But I forgot to activate AP number 2. So the aircraft started a go around procedure but AP was still following the ILS slope. Thus I crashed with toga throttle and nose down! So the ILS capture mode should be disabled in event of a go aro...
by Flyer10
22 Jul 2018, 09:03
Forum: Community projects
Topic: Project FMC simplified for Project Airbus
Replies: 3340
Views: 3185176

Re: Project FMC simplified for Project Airbus

I found that the speed changes from a defined value during approach e.g. 180K to 0 (at FAF) instead of the coded value ~160/140K on final. I have not recognized this prob in earlier panel versions. I guess there is a conflict between the flap setting panel code e.g. when I use my Saitek throttle fl...
by Flyer10
21 Jul 2018, 07:51
Forum: Community projects
Topic: Project FMC simplified for Project Airbus
Replies: 3340
Views: 3185176

Re: Project FMC simplified for Project Airbus

Hopefully it gets fixed so it's not star dependent (because they are all out of date anyway), the weird thing is that it's there if you just land and take off but disappears at some point during the climb/cruise/descent.
by Flyer10
01 Jun 2018, 07:05
Forum: Community projects
Topic: Project FMC simplified for Project Airbus
Replies: 3340
Views: 3185176

Re: Project FMC simplified for Project Airbus

Ok, I have done flap work before I so I can change them if it's needed, as a starting point, I would probably change the A321 lift up by 5%
by Flyer10
31 May 2018, 06:58
Forum: Community projects
Topic: Project FMC simplified for Project Airbus
Replies: 3340
Views: 3185176

Re: Project FMC simplified for Project Airbus

Agree, it's weird that the bigger aircraft have less flaps even if they are using the same wing. Did you see the A321 has extra slots for more lift so it would make sense to give it a higher lift number in the aircraft.cfg so it will match the figures.
by Flyer10
30 May 2018, 06:30
Forum: Community projects
Topic: Project FMC simplified for Project Airbus
Replies: 3340
Views: 3185176

Re: Project FMC simplified for Project Airbus

Everything I have read is that the A318,A319 and A320 are the same (This was an airline pdf), there is a possibility the A318 could be changed if airlines go for the steep approach option to get into places like EGLC with a 6* glide slope. Maybe that was what you were thinking of with the A319? I ac...
by Flyer10
29 May 2018, 08:45
Forum: Community projects
Topic: Project FMC simplified for Project Airbus
Replies: 3340
Views: 3185176

Re: Project FMC simplified for Project Airbus

The A321 has different flaps, I could only find the full flaps setting which is 25 for both CFM and IAE, it's 35 on the 18,19 and 20. I assume the other settings are correct but they are hard to find.
by Flyer10
16 May 2018, 06:25
Forum: Community projects
Topic: Project FMC simplified for Project Airbus
Replies: 3340
Views: 3185176

Re: Project FMC simplified for Project Airbus

Thanks for that, I will do that now and it's an easy fix for Francois to add for the release.
by Flyer10
15 May 2018, 09:02
Forum: Community projects
Topic: Project FMC simplified for Project Airbus
Replies: 3340
Views: 3185176

Re: Project FMC simplified for Project Airbus

That's what I use as I don't really want to zoom in so far that I cannot see what's happening out the window, I hope they both stay. I also need the engine start popup as the 3d ignition switch has never worked for me. I can still select slats 1 with no flaps when on the ground Francois. That's beca...
by Flyer10
15 May 2018, 08:28
Forum: Community projects
Topic: Project FMC simplified for Project Airbus
Replies: 3340
Views: 3185176

Re: Project FMC simplified for Project Airbus

The popup MCDU is still transparent, I just changed the black to red 0 blue 1 green 0, it's still black but not see through any more. I would like to keep the popup MDCU at least because I know there has been talk of removing them. The popup MCDU would be great with improved textures, I know our tex...
by Flyer10
10 May 2018, 11:08
Forum: Community projects
Topic: Project FMC simplified for Project Airbus
Replies: 3340
Views: 3185176

Re: Project FMC simplified for Project Airbus

Yes, that's correct Francois but that seemed different to what you posted before, one of us got confused somewhere!
by Flyer10
08 May 2018, 20:05
Forum: Community projects
Topic: Project FMC simplified for Project Airbus
Replies: 3340
Views: 3185176

Re: Project FMC simplified for Project Airbus

Yes, that is how the real world airbus flap logic works, you can do a a search for those terms and see how pilots say the plane doesn't slow down too much on slats until it gets to F2 and they need 1+F on retraction or too much lift would be lost at once.
by Flyer10
08 May 2018, 13:12
Forum: Community projects
Topic: Project FMC simplified for Project Airbus
Replies: 3340
Views: 3185176

Re: Project FMC simplified for Project Airbus

When I speak about position "1", this is lever position ;) Lever Position 1 pilot = 1+F (Slats + Flaps) Lever position 1 by SFCC after take off = 1+F (slats + flaps) below 210 knots, and 1 (slats only) when passing 210 knots. We are on the same wave. The SFCC is correct but the pilot cann...
by Flyer10
07 May 2018, 08:49
Forum: Community projects
Topic: Project FMC simplified for Project Airbus
Replies: 3340
Views: 3185176

Re: Project FMC simplified for Project Airbus

Position 1 slats only can be selected by the pilot, Its slats and flaps 1 that cannot be selected except on the retraction schedule after takeoff.
by Flyer10
04 May 2018, 10:51
Forum: Community projects
Topic: Project FMC simplified for Project Airbus
Replies: 3340
Views: 3185176

Re: Project FMC simplified for Project Airbus

I assume the traffic radar doesn't work in P3Dv4 so is there another dll we can use?
by Flyer10
30 Apr 2018, 06:44
Forum: Community projects
Topic: Project FMC simplified for Project Airbus
Replies: 3340
Views: 3185176

Re: Project FMC simplified for Project Airbus

I would hope Francois leaves the spoiler alone if it means we can't use an axis on our controllers, I would even rather have wrong default flaps than have to manually use the mouse for the flaps lever.

You could maybe just change the MFD to be correct?
by Flyer10
29 Apr 2018, 07:21
Forum: Community projects
Topic: Project FMC simplified for Project Airbus
Replies: 3340
Views: 3185176

Re: Project FMC simplified for Project Airbus

Selecting F1 on the ground is 1+F selecting F1 in the air is just slats1 with no flaps except when retracting after takoff. I believe we currently go from 0 to 1+F which is wrong. Its only from 2 to 1+F in the air. -- "In addition to the slats, the flaps will move to 1 when… Anytime on the grou...
by Flyer10
27 Apr 2018, 07:56
Forum: Community projects
Topic: Project FMC simplified for Project Airbus
Replies: 3340
Views: 3185176

Re: Project FMC simplified for Project Airbus

That's why I mentioned you type them in manually, it takes seconds to do for the SID if there's any and you can do the star and arrival while enroute. It's also possible to ask navigraph for a free older database to use like the creator of LNM did and use that instead. Also possibly get access to th...
by Flyer10
26 Apr 2018, 08:27
Forum: Community projects
Topic: Project FMC simplified for Project Airbus
Replies: 3340
Views: 3185176

Re: Project FMC simplified for Project Airbus

Possible great news guys. LNM now allows SIDs and STARS to be saved in the FP. now this means we can fly into any airport and use the procedures if François wants to change things. All he would need to do is lets us copy the altitude and speed restrictions to each waypoint. No more work would be nee...
by Flyer10
18 Apr 2018, 15:31
Forum: Community projects
Topic: Project FMC simplified for Project Airbus
Replies: 3340
Views: 3185176

Re: Project FMC simplified for Project Airbus

It's not V4 specific, I don't use the sids and stars as my ATC provides that but I can still select them if I am at an airport that has them.
by Flyer10
18 Apr 2018, 09:29
Forum: Community projects
Topic: Project FMC simplified for Project Airbus
Replies: 3340
Views: 3185176

Re: Project FMC simplified for Project Airbus

It's pretty easy to add repaints and they can double or triple the rar size so I think it's a good choice not to include too many. As for P3Dv4, I use that and you will need the 64 bit sound gauge from Doug Dawsons site. Also 1 or 2 other 64 bit dlls which have been explained on previous pages. Ever...
by Flyer10
15 Apr 2018, 07:44
Forum: Community projects
Topic: Project FMC simplified for Project Airbus
Replies: 3340
Views: 3185176

Re: Project FMC simplified for Project Airbus

Those textures would be wrong, 1 and 1+F are the same detent and the computer decides when to use each one. " In addition to the slats, the flaps will also extend to 1 when… Anytime on the ground. If we’re planning a departure, we want our flaps out, not just the slats. Airbus logic knows this ...
by Flyer10
31 Mar 2018, 09:41
Forum: Community projects
Topic: Project FMC simplified for Project Airbus
Replies: 3340
Views: 3185176

Re: Project FMC simplified for Project Airbus

I don't doubt that but I can't tell ant difference in the VC although the AP control is quite clearly different.
by Flyer10
30 Mar 2018, 08:31
Forum: Community projects
Topic: Project FMC simplified for Project Airbus
Replies: 3340
Views: 3185176

Re: Project FMC simplified for Project Airbus

Prosdocimo wrote:
29 Mar 2018, 17:46

Hi thank you! Does it include Bjoern latest modifications?
Yes, from what I can tell it looks 100% like Bjoerns VC but uses the FD autopilot which means you can use hardware or buttons to control it.
by Flyer10
26 Mar 2018, 15:57
Forum: Community projects
Topic: Project FMC simplified for Project Airbus
Replies: 3340
Views: 3185176

Re: Project FMC simplified for Project Airbus

Sorry for the new post but I am fixing the lights. For the A321, overwrite these lines. light.8=10, 47.00, -1.00, 3.00, fx_vclighth // VC Day Lighting eclairage jour light.9=4, 48.00, 0.00, 5.00, fx_vclighth // eclairage nuit Cockpit For the A318 light.8= 10, 45.90, -1.00, 5.50, fx_vclighth , // ecl...
by Flyer10
26 Mar 2018, 15:22
Forum: Community projects
Topic: Project FMC simplified for Project Airbus
Replies: 3340
Views: 3185176

Re: Project FMC simplified for Project Airbus

Haven't we discussed this before? https://douglassdawson.ca/ -> XML sound gauge -> Rename A32x_Sounds.gau -> Overwrite -> XML Config gauge -> Rename A32x_XML_Config.gau -> Overwrite Yes we did but the sounds gauge is a huge 648kb while the DD one is 175kb so I assumed it was a different gauge. I ma...
by Flyer10
26 Mar 2018, 15:19
Forum: Community projects
Topic: Project FMC simplified for Project Airbus
Replies: 3340
Views: 3185176

Re: Project FMC simplified for Project Airbus

A318: The OVHD INTEG LT must be switched on during night and the VC looks fine as expected, otherwise the VC is nearly dark. The DOME LT can be switched on too and there is a slight additional lighting within the cockpit (it could be a bit more, but this is q of taste). The illumination/ brightness...
by Flyer10
26 Mar 2018, 12:01
Forum: Community projects
Topic: Project FMC simplified for Project Airbus
Replies: 3340
Views: 3185176

Re: Project FMC simplified for Project Airbus

Hmmm, I flew the A318 and the cockpit was dark apart from when the taxi or landing lights were on, the white lights shining down were ok.
So are you saying the A318 cockpit lights up from the cabin lights and also the ecams work even with the Int lights switch to off?
by Flyer10
26 Mar 2018, 10:18
Forum: Community projects
Topic: Project FMC simplified for Project Airbus
Replies: 3340
Views: 3185176

Re: Project FMC simplified for Project Airbus

I finished my first flight, overall, amazing job! -The N1 take off limit stopped the red line take offs even at max flex. -The Nav worked perfectly, has the climb and descent coding been worked on? Everything seems to be so much better, even the slow down at 10000 feet. -new engine sounds are great ...
by Flyer10
26 Mar 2018, 08:58
Forum: Community projects
Topic: Project FMC simplified for Project Airbus
Replies: 3340
Views: 3185176

Re: Project FMC simplified for Project Airbus

I have just loaded V2 up, it looks great. Finally I can see the PFD with landing lights on in P3Dv4. The AP still works for me just fine. Everything looks correct so far with the exception of two things, keyboard or fsuipc commands for lights don't work, they flip on for a fraction of a second and t...
by Flyer10
09 Mar 2018, 10:43
Forum: Community projects
Topic: Project FMC simplified for Project Airbus
Replies: 3340
Views: 3185176

Re: Project FMC simplified for Project Airbus

The avionics were on and the PFD and MFD were ok, It was the seatbelt and the sign next to it but I have forgotten the name. As for the hardware, every single aircraft has been ok with it, even the likes of Majestic and A2A which need a bit of programming via LVARs. Maybe I didn't install right, I w...
by Flyer10
06 Mar 2018, 18:34
Forum: Community projects
Topic: Project FMC simplified for Project Airbus
Replies: 3340
Views: 3185176

Re: Project FMC simplified for Project Airbus

I tried Bjoerns update and had a whole host of problems. -The downloaded sounds didn't work, even after renaming to match the sound.cfg entry. -I loved the FMC and set it up and took flight, I wasn't able to select GPS until I was in flight. -The AP and FD wouldn't engage -The backup vor / ndb point...
by Flyer10
15 Feb 2018, 10:17
Forum: Community projects
Topic: Project FMC simplified for Project Airbus
Replies: 3340
Views: 3185176

Re: Project FMC simplified for Project Airbus

CokiBH wrote:
14 Feb 2018, 14:52

You want to do textures for a330 cockpit?
François released an A330 beta a while ago with both the a32x cockpit and the original cockpit. Maybe have a look at the original cockpit and talk to François to see if anything can be done.
by Flyer10
12 Feb 2018, 09:24
Forum: Community projects
Topic: Project FMC simplified for Project Airbus
Replies: 3340
Views: 3185176

Re: Project FMC simplified for Project Airbus

I would have thought doing textures for the A330 would have been the route to go. We have a flyable plane but the TR textures are really horrible, as are the textures for the a340 and a380. They would be massive upgrades compared to the small upgrades for the A32x.
by Flyer10
11 Feb 2018, 14:11
Forum: Community projects
Topic: Project FMC simplified for Project Airbus
Replies: 3340
Views: 3185176

Re: Project FMC simplified for Project Airbus

François, the N1 climb limit is linked to the N2 number so the power is about 10% less than it should be and that really takes effect at 30,000+. It can often lead to a stall when heavily loaded. It's definitely like that on the A321 IAE and I am pretty sure the rest too. Bjoern, you stated at the s...