Project Airbus – Talk

wulfbindewald

Have a look into the skyvector.com charts (world HI or world LO), which sometimes helps to find the right direction.
The corresponding airway to the transition waypoint DENVO is "SE" southeast from OBBI.

wulfbindewald

The latest panel included the VC model from 04.06.2017, which I use too. There is a problem with the model from 19.11.2017 in conjunction with the updated A32x_system.xml, e.g. flap lever arm control with Saitek joystick, strange xml tools behaviour at least on my end. So my hope is that this could ...

wulfbindewald

Hi François thank you for all your efforts. I think that most fo us could fly without acting on 2D panel. Several aircraft models on the web do not display it anymore nowadays. I second this argument for the panel 2.0+ development. Francois, please advise us which VC model is compliant with your up...

wulfbindewald

Hi François thank you for all your efforts. I think that most fo us could fly without acting on 2D panel. Several aircraft models on the web do not display it anymore nowadays. I second this argument for the panel 2.0+ development. Francois, please advise us which VC model is compliant with your up...

wulfbindewald

A32x panel 2.0 beta E: The "PA 32X_Common" folder is correctly filled as is. No file moves nec. The TrafficRadar.dll must be enabled similar to the XMLTools in the dll.xml folder. Here one section example, if the FSX root file is located in "E". <Launch.Addon> <Name>Traffic Radar...

wulfbindewald

I checked EIDW/ SID and LFPG/ STAR: I could reproduce all missing waypoints, if I deactivate the files XFMC_04072018.BGL and FreenavAIRAC_04072018.BGL. All waypoints are recognized in the FMC, if both files are included again in the sim. Are you sure that both files are included in the right place? ...

wulfbindewald

As for P3Dv4, I use that and you will need the 64 bit sound gauge from Doug Dawsons site. Also 1 or 2 other 64 bit dlls which have been explained on previous pages. Everything works perfect with the exception of the dynamic lights lighting up the cockpit, it's a model problem and I am not sure if i...

wulfbindewald

Bjoern wrote: ↑
16 Apr 2018, 22:18
Unless François changed something, the 1+F auto logic is in, with a bit of a bug in that the flaps will auto-retract to 1 when accelerating past 100 KIAS.

100 ? Flap auto retraction 1+F to 1 at 210 K on my end with A32x panel 2.0 beta E.

wulfbindewald

Thanks, Prosdocimo. Unfortunately I am unable to start one engine even switched to crank and fuel cross feed open (Ctrl-E works to start engines sequenced). The light prob persists.

wulfbindewald

Bjoerns last Airbus_A320_Int_Mod.mdl dated 19/11/2017 to be included and activated in the "model.cockpit" folder at first, but... the engines can not be started although the engine starter is correctly engaged (double click) and the Cockpit int lights at night do not work although switchab...

wulfbindewald

The Airbus_A320_Int_Mod.mdl dated 19/11/2017 includes e.g. the remodelled engine start switches with a double-click-security and the remaining light switches on the OHP. All the additional features only work properly with an updated system related xml (Bjoern provided the system related files in Nov...

wulfbindewald

All 3 IAE versions have the same ECAM problem: not dimmeable, the checklist click spots (in the botton left) do not work properly.

wulfbindewald

The favourized VC internal light definition can now be generally adopted to all 7 Aircraft versions, because the VC is fully standardized for all versions and located in one position (independent of the aircraft length). No need to vary, but all VC internal lights will be looking the same in all air...

wulfbindewald

Hmmm, I flew the A318 and the cockpit was dark apart from when the taxi or landing lights were on, the white lights shining down were ok. So are you saying the A318 cockpit lights up from the cabin lights and also the ecams work even with the Int lights switch to off? A318: The OVHD INTEG LT must b...

wulfbindewald

I checked 3 VC light criteria for all aircraft with quite different results. VC doomlight function / ECAM dim light does not work / Overall cockpit light during night (doomlight unswitched) much too bright . "ok"= works fine "-" does not function A318: ok / ok / ok A319_CFM: - / ...

wulfbindewald

The creation date of each single airport definition corresponds approximately to the used AIRAC at that date. All AIRAC data are manually selected and collected in the database, currently within the pack "FD_FMC airports pack V4 02032018.zip".

wulfbindewald

Hi Flavio, please update the FMC to panel version 1.60 if not already done. The update is available in the FreenavDBGroup website, download section and Common files, see link http://www.freenavdbgroup.com/download/Panels/FD-FMC_1.60_for_A32x_family.zip P3DV4.x requires a modified 64bit "XMLTool...

wulfbindewald

So how do you capture the localizer? With Loc button? I normally would activate ILS passing 10000 feet and then APP to capture localizer when lined up but these buttons do not light up at all but are clickable. Tune the frequency, set the course, be within 30 nm of the localizer and then press the ...

wulfbindewald

The FMC adaption looks nice. Will there be a clickable 2D FMC window also possible as of today for practical reason?

wulfbindewald

Here there are links to the latest A320 panel beta 2.0b release from Francois and in addition a new configuration option.
http://freenavdbgroup.com/Temp/PA%20A32 ... 202.0b.zip
http://freenavdbgroup.com/Temp/Init%20g ... 20file.zip

wulfbindewald

FSX: XMLTools.dll V2.0.0.1 located in FSX root. dll.xml: XMLTools are described FSX.cfg: I removed one existing line in the [TRUST] section containing references to XMLTools.dll Started FSX with FORK3 from yesterday and had to trust XMLTools.dll. Then CTD. Started A320_CFM FDD version 2.0b (with the...

wulfbindewald

CTD - to be more precise: FSX launch is ok. When I select the corresponding aircraft ant let FSX start, then the sim asks for permission xmltools.dll and I permitted with "yes". Immediatly afterwards the sim crashs. Interesting, that I have been asked for permission now although the XMLToo...

wulfbindewald

Flap lever joystick: I varied the joystick:0, 1, 2 as proposed. Unfortunately no success. Have you tried varying the axis name as well? Or are you pretty sure that your flap lever is the controller's Z axis? Try varying the value behind ":zaxis:", i.e. joystick:0:zaxis:2 to joystick:2:zax...

wulfbindewald

Flap lever joystick: I varied the joystick:0, 1, 2 as proposed. Unfortunately no success. <Macro Name="FlapLeverAxisControl">1</Macro> <Macro Name="FlapAxis">joystick:2:zaxis:0</Macro> <Macro Name="FlapAxisUpVal">0</Macro> <Macro Name="FlapAxisDownVal">65535</...

wulfbindewald

Thanks for your continuous support. The unplug of the other controller does not change any JoyTester result. What do you mean with ".....put the axis name into the "FlapAxis" macro.....", if the test-indicated axis is "Z"? There are more than 1 entry possible in this li...

wulfbindewald

JoyTester: I have concerns with the JoyTester, because I have in total 3 joysticks but it showed only one w/o any choice. The displayed axis are Z, R, U, V (no X, no Y) and Z was the only moving calibration bar for the flap lever. May be the JoyTester works only properly with one special joystick. F...

wulfbindewald

If someone is interested, here is the new initialization gauge : http://freenavdbgroup.com/Temp/Init%20gauge%20and%20ini%20aircraft%20file.zip Contains : - new A320_FMS_init.xml gauge to copy and replace existing gauge in panel folder ... A320FD-FMC folder - Aircraft configuation file "Config_...

wulfbindewald

I think I found a good utility to read controller axis inputs. Not sure how it works with a separate stick and throttle controller, but it works fine for the XBox 360 controller I'm using. http://www.freewarefiles.com/downloads_counter.php?programid=33788 Thanks, here I found the "JoyTester&qu...

wulfbindewald

If I used the standard controls, I'd get pretty ugly results when it comes to the automatic 1/1+F management because the hardware controller would say "put the flaps to position 1", while the aircraft logic would say "put the flaps to position 1+F". The result would be event flo...

wulfbindewald

If someone is interested, here is the new initialization gauge : http://freenavdbgroup.com/Temp/Init%20gauge%20and%20ini%20aircraft%20file.zip Contains : - new A320_FMS_init.xml gauge to copy and replace existing gauge in panel folder ... A320FD-FMC folder - Aircraft configuation file "Config_...

wulfbindewald

Of course it doesn't work if you don't adapt the axis name to your flap lever's hardware axis and enable the controller. Read the comments in the hardware control gauge file for some information. The snippet from the standard.xml might provide a clue regarding what you're looking for. Maybe (joysti...

wulfbindewald

A32x...Flaps: Thanks for the modified A32x_System.xml and corrective lines, Bjoern. Unfortunately the flap controller does not work. This is my current standard FSX entry in the Joystick controller Standard.XML. <Axis> <AxName>ZAxis</AxName> <Index>2</Index> <AxEvent>AXIS_FLAPS_SET</AxEvent> <AxScal...

wulfbindewald

Bjoern, I think there is a couple of time necessary to release the next update. So could You please send me in advance the few lines to be modified in the A32X_System.xml to get axis control over the flaps again with the joystick ?

wulfbindewald

Q to Bjoern, the above installation list & explanation for optional elements does not include the TCAS (Traffic Radar.dll and DLL.xml implementation). Intended?
I guess the known TCAS installation procedure remains valid as explained in the FDD Fork.

wulfbindewald

Thanks for the explanations, Bjoern. IMO any provided aircraft pack should include at least everything to use the sim ad-hoc. This means to provide at least one full texture set from one airliner (aircraft.cfg configured for 1 livery) and at least one working soundset. The link to the MS A321 is ok,...

wulfbindewald

"....Does François have permission to distribute the soundset?...." Maybe we are not talking about the same soundset. Francois could clarify this, if needed. I know the used CFM and IAE soundset is freeware. " .....Engine sounds are one of the things I don't necessarily would include ...

wulfbindewald

Is it possible to link both sound.IAE and sound.CFM into the PA A32x Common folder to only install both big files 1x for all A32x? Or does the MSC code strongly require individual full sound installation within each defined aircraft? EDIT: Maybe I found already the answer: The sound.5A and .5B folde...

wulfbindewald

I hope this can be solved soon, otherwise a development step backwards. Is this solveable by Francois´panel definition? No guarantees. It's basically a realism vs compatibility issue. Take your pick. Thanks in advance. It is always good, if the sim user can choose his favourite control tool between...

wulfbindewald

Bjoern wrote: ↑
12 Nov 2017, 16:23
As I've said, the flap system is custom and therefor, axis control is currently not possible.

I hope this can be solved soon, otherwise a development step backwards. Is this solveable by Francois´panel definition?

wulfbindewald

2. I can not set the flaps with the joystick. Though the flaps can be moved with the mouse (clickspot lever), but not as usual with the joystick controller. Both throttles work fine with the joystick. I crosschecked again with the previous A320 CFM version, where everything works fine. The flap sys...

wulfbindewald

FORK A320 V2.0B : Two Issues found so far: 1. Immediate CTD because of missing A320_FlapLever_mod.wav sound file in the "PA A32x_Common/Sounds" folder. a) Simply delete in the "A32x_Sounds.ini" file the line "Sound40=A320_flaplever_mod.wav" and "Lvar40=A32x_FlapLev...

wulfbindewald

Q to Bjoern, is it posible to locate the VC model location x,y,z coordinates in a simple but seperate data file, so that all 4 Airbus A318/319/321 VC positions within each aircraft can be defined easily in each aircraft folder. I think the correct VC location within the aircraft is essential to avoi...

wulfbindewald

Yes, but only if the distance between eyepoint and switch is too big. Try to reduce the distance....

wulfbindewald

The VC light in the cockpit is pulsing during night if the landing lights or the Nav logo lights are switched on. My workaround is to deactivate the additional cockpit lights "light.4=4,....." in the aircraft.cfg [LIGHTS] section although this new dimmed lights.4 are well illuminating the...

wulfbindewald

The VC light in the cockpit is pulsing during night if the landing lights or the Nav logo lights are switched on. My workaround is to deactivate the additional cockpit lights "light.4=4,....." in the aircraft.cfg [LIGHTS] section although this new dimmed lights.4 are well illuminating the ...

wulfbindewald

Now the switches work as expected (similar to the 1.60 configuration). Thanks!
The "sound.CFM" folder is missing. Just copy the previous sound.CFM sound folder into the latest aircraft PA A320FD-FMC_CFM_2.0 folder again.

wulfbindewald

Thanks, but the download requires a password.
EDIT: No password more nec. ok.

wulfbindewald

I am only using the new A320_2.0b folders set and installed both folders 1:1 into the Simobjects/Airplanes folder. The old A320FD-FMC.cab is deactivated in the FSX/Gauges folder. Most switches are not working: ADIRS, APU, Cabin light and all external lights. The file A32x_System.xml exists in the A3...

wulfbindewald

A320_2.0b:
Now rain sound works fine.
Several VC switches do not work on my end. They all automatically switch off again after trying to switch on.

wulfbindewald

Is there any tick to get the VOR or ADF needles to work? I thought you just needed to use the switches under the range switch but this doesn't seem to work even though it shows the thin and fat arrows in the corner of the display. Have you switched the navigation controller in the EFIS to VOR or NA...

Search found 501 matches