Project Airbus – Talk

Speedbird wrote:I dont care about it anymore because i know just like a30 vc pretty much nothin will work on this ones 2

Thank you for your support *Sarcastic Face* We do try our best, you know. Complaining about work that we put in in our free time into is not the most polite way to act.

Humongous2 wrote:This might be a silly question, but I was just wondering. There doesn't seem to be updates on the development of the A340, is that because the team developing these superb aircraft are putting it on hold til the A330 is done or is it because the same updates also apply to the A340.

The A340 engine preview is next - from a textures and exterior model perspective the 330 and 340 are developed in parallel

Speedbird wrote:When will it be released I want it now

You're not getting it now. You have to wait.

DC10 wrote:The A340 engine preview is next - from a textures and exterior model perspective the 330 and 340 are developed in parallel

Sounds awesome.

Virtual cockpit is completely done?

Im that guy who actually prefers the wingview. This might have been previously asked but I was just wondering, when the aircraft are finished and released, will there be a wingview version as well as the virtual cockpit?

Yes.

Will there be livery done for every airline who have flown A330's and A340's?

Well, no.

only some liveries, the rest will be done by third parties I guess.

Nixpilot wrote:only some liveries, the rest will be done by third parties I guess.

The main question is which liveries exactly? I know AC, LX, QF and TAM.

I don't know about that.

Nixpilot wrote:I don't know about that.

If he doesn't know, there might be a problem hahaha

Yesterday and the day before I flew the A330 by Project Opensky and all I can say is the model has a low quality in contrast to the Project Airbus A330.
By the way, did you realize the splitted aileron on A330/A340?

M@rco wrote:By the way, did you realize the splitted aileron on A330/A340?

They realized it on the A380 with all 3 aileron sections moving. So it's most likely they do or already did it with the two aileron sections on the A330/A340.

Poskys A330/A340 is still state of the art! To be overtopped by PA's models, but it's still way to go (put me right, PA Team...

Good work guys. I can see the meticulous detail that you put into the A380 in this multiplied by 100.

Poskys A330/340 (only freeware a33X and 4X out there for fs9) is good, but since most of my gaming is done on my el cheapo notebook the thing looks odd. The nose cone is off. Not complaining, just pointing out some observations. Plus alot of the posky uploads on avsim and flightsim have been tinkered with recently. I was doing a really light takeoff from 31L kjfk to KBOS and i literally used up all the runway before i could rotate. I exited, deleted the aircraft.cfg, found a backup that I had downloaded when they had a website, and found that i was golden. No more piano keys rotation.

Soon it will be year after announce hope that the works getting near finish line

eddm wrote:Poskys A330/A340 is still state of the art!

Ehhh....

Poskys a330 is state of the art??? Are you kidding me??

The first anniversary of the announcent is tomorrow, 3 June 2013! And the A330/A340 is getting better with each day that passes. CONGRATULATIONS on the first anniversary

I wouldn't get your high hopes up...But..We'll see..

I hope, that it will not take one more year to finish this beautiful airplane!
A release this summer would be great, so I could fly with this A330 around the world in my vacations!

Happy B-DAY PA330!

I wouldn't hold your breath space_coast. Lol!

Hello PA team,

I want to ask one question.

There will be rain effects on the front cockpit glass?

eddm wrote:Poskys A330/A340 is still state of the art!

Ha! I needed a good laugh this morning. Just don't get me started on the paintkit.

As for rain effects, I'd hazard to guess any features present on the A380 will be incorporated onto the A330/A340 as well.

Kyle Schurb wrote:

eddm wrote:Poskys A330/A340 is still state of the art!

Ehhh....

...as far as concerns FS2004.Name me a better one! (CLS, Overland? -no way!)

Why don't you start by telling us why CLS/Overland aren't better than POSKY?

By today's standards, certainly none of the 3 options are "still state of the art!"

Any new preview pics?

I don't think the models are bad, especially when you compare the size of the freeware community, which is getting smaller by the second

Kyle Schurb wrote:Why don't you start by telling us why CLS/Overland aren't better than POSKY?

By today's standards, certainly none of the 3 options are "still state of the art!"

Hi,
to me, even little things make the difference, so, if I simply compare the design of the maingear, I see that only posky paid attention to, that the wheels are more spread out there on the bogies (sideways)!
When I saw PA's previewvideo a also knew that the PA A330s will be as nice, and even better with todays modelling, and animation technics.

Hello PA-Team,

One question, will the A330-200 will have the option to choose between the wings with and without fuel dump nozzle? The A330-300 has none and the A340-200/-300 have them. But I saw on some pictures the A330-200s have that option.

Hi PA,
In the a330 VC autopilot knobs will be animated? I mean they will be spinning?

Yep, they should be rotating.

Thank You for answer.

hi project airbus

my favorite airplane is the a340-200 and the a330-200 i just want to ask are you making a Royal Jordanian livery for both airplanes
that is my favorite livery.
http://www.flickr.com/photos/caribb/513722482/
http://www.airliners.net/photo/Royal-Jo ... 1703514/L/

ReneM. wrote:Hello PA-Team,

One question, will the A330-200 will have the option to choose between the wings with and without fuel dump nozzle? The A330-300 has none and the A340-200/-300 have them. But I saw on some pictures the A330-200s have that option.

Very late reply, but yes, it will.

Thank you very much Nick. The day the A330/A340 will be released, they're going to be my favourite freeware longhaul aircrafts. Especially the A340-300.

hi projeect airbus please answer this and please reply are you guys making a royal Jordanian livery for a330-200 and a340-200. i have some pic a340-200 http://www.flickr.com/photos/caribb/513722482/
a330-200 http://www.airliners.net/photo/Royal-Jo ... 1703514/L/

You already asked for it.

okay so whats the answer are you guys going to make the livery for Royal Jordanian not to be rude to you project airbus you guys make the best airplane's please make my favorite livery for both a340-200 and a330-200 it would look nice and beautiful please reply if you are making it or not making it.

Let them make HQ fuselage textures, HQ cockpit etc. I think Your livery will be after that.

alhayek.adam wrote:okay so whats the answer are you guys going to make the livery for Royal Jordanian not to be rude to you project airbus you guys make the best airplane's please make my favorite livery for both a340-200 and a330-200 it would look nice and beautiful please reply if you are making it or not making it.

If there isn't an official PA livery released initially with the A/C, I'm sure someone will make one if you make a polite request. Don't fret--the FS world has more than enough willing developers

thank's a lot project airbus i hope that if there not making a/c livery someone can hear me and make the royal Jordanian livery. once again thank's

Thank you sooo much you guys at PA for making this plane and especially making it for FS9 aswell coz it seems like most developers of quality planes have turned their back on the sim and adopted the visually-good but really power-demanding FSX and now Prepar3d.

Appreciate all your work.Keep it up.
Can't wait to finally have a good A330/340 to paint in Cathay Pacific colours and fly from my hub HK and do it especially in a VC :3

And it may seem like alot but since you're still working on this stuff, have you considered keeping this things VC production in particular open? What I mean is allow for modding coz there's alot of good panels and weather radar/TCAS/TWAS/FMC type addons available but at most can only be merged into 2D panels but not VC. So just saying if at all it is even possible to give thought to such aspect

Otherwise I'm happy getting a plane with quality VC too!

I saw PA330 landing video, and one guy said that PA team stopped working on the model. I hope this isn't true, is it?

Airbus Fan wrote:I saw PA330 landing video, and one guy said that PA team stopped working on the model. I hope this isn't true, is it?

I'm still working on it...slowly, but I am...

I know, You're working hard on this beautiful aircraft.

just an update guys - still working on the A340 engine - there has been a minor update to the engine and the engine cowlings and pylons are being textured. As soon as they are done there will be an A340-300 preview.