Reworked ecams for default A321 FSX

[GaryG]

Ok the gauge has been updated on avsim.

Follow this:

http://library.avsim.net/search.php?Sea ... &Go=Search

Thanks, it should be ok now.

regards

[sknepper]

After downloading the latest version it seems to run very well, and I do love the TO warning when I forget the flaps for take-off. Yes, I am not the type to constantly keep the checklists in view.
This is just what we need for the A320 series.

[GaryG]

Hey Sean,
Thanks for your reply, hope that it satisfies your basic needs. I like to hear people enjoying my work, all I hope is that I can give more to the community. Feedback is extremely important, now I can appreciate.

Thanks

[sknepper]

Hey Sean,
Thanks for your reply, hope that it satisfies your basic needs. I like to hear people enjoying my work, all I hope is that I can give more to the community. Feedback is extremely important, now I can appreciate.

Thanks

Was definately worth a compliment and it is certainly earned with your hard work. I'm sure there will be many more people appreciating it . When I just checked there were 646 downloads on avsim.

[GaryG]

That was a pleasure to hear... Thanks a lot Sean.... much appreciated.

Enjoy it to the full.

[sknepper]

I am still enjoying it and haven't got anything to criticise. Nice one !

[GaryG]

Thanks Sean I encourage you to follow my next project, that is, the 717 gauges. Check the 717 model by Alex, I will be posting updates there

[Lrusso]

Simply excellent!
Just trying to incorporate it in with my SLCC flap computer and autoflare gauge from Stefan Liebe gauges they seem to be interfering but I really don't wanna lose Stefans PFD.

[Lrusso]

I think I have it worked out I had to remove the autoflare computer! because it would somehow interview with the landing once i touchdown AP Off so I don't understand how! Thats fine I never used it anyway! This is such an amazing gauge!

Along with Stefan PFD, This ECAM, and some modifications I made on my own to Stefans PFD (The block next to the AP,FD, A/THR status now shows the approach CAT 1 - III and the Decision height) I feel like I'm very close to a complete a320.

One question GregG if you are still checking this thread! I can't get the LGD Inhibit to extinguish! I'm at FLAPS Full, Gear Down, Spoilers Armed? Any idea?

[GaryG]

It will extinguish once you land....

regards

[Conchulio]

GaryG, i recently discovered this threat and i MUST say how incredibly great your enhanced ECAM is and how much greater it feels and looks like to fly the PA A320 family.
However, i have two questions which i think haven't been posted yet:

1. When i select Flaps 3 the T.O. memo still says no TO Flaps? As far as i know, Flap 3 is also used for take-off or am i wrong?
2. I have seen on 1 or 2 pictures from you that you were able to select the autobrakes from the VC. I can't, have i done something wrong with the installation?

It would be great if you could answer my questions
Once again, thank you so much for this great ECAM, it really is marvelous!

Conchi

[GaryG]

Hi conchulio,

1. I recall that I programmed to show that for 3 or 4 it will show as a take off config. Check that you indeed have flaps 3 or 4. I think that this was because I had different steps.
2. Yes , I recommend to search for stefan liebe gauges. there is a link somewhere here in the forum. If you follow the steps, you'll have an updated PFD as well.

Hope this helps.

regards

[Conchulio]

Alright, i'll look into it. If something fails i'll call you back .

Thanks for the quit answer!

Conchi

[Majid64]

Hi All !

Congratulation GaryG , you are the best I downloaded your panel rework today , very amazing ! and now I think it's time to find a solution about Don't sink error message during landing on FSX A321 VC, I hope someone can fix this.

Best.