On the newer 2.1 Airbus A320/321 when press and hold the number pad Ins and Enter Enter keys to turn the nose wheel on the ground the wheel will keep turning left or right until I let the key go, like most of the planes in FS9. However if using a older version of Project Airbus like the A318 & 319 , when I press and hold the key down to turn the wheel, it only turns it one notch, I would have to contumely press the key to turn the wheel more, if that makes sense.
Here is the feature list from the V2.1 topic which mentions a new code for the nose wheel steer
http://www.pairbus.com/discussion/viewt ... =10&t=1349
Applied custom engine fan animations. Added windmilling.
Applied the custom tailhook animation so the cargo doors open slower.
Changed the exit assignments to the A321 config.
Applied the new antenna hiding method.
Fixed a smoothing issue near the cockpit windows.
Improved the specular shine.
Added wingflex.
Added a missing antenna just ahead of the v-stab.
Replaced the CFM and IAE engines with the improved A321 versions.
Replaced the flap fairings with the more accurate A321 versions.
Added hardcoded doublestrobes.
Applied the new surface droop code.
Updated the pilot models in the cockpit.
Tweaked the APU shape at the rear.
***** Applied the custom nose gear steering code. *****
Added windshield wiper objects (unanimated).
Removed the jetheat effect entirely.