Shockwave Lights Redux

Post Reply
diogo180794
Posts: 13
Joined: 07 Sep 2011, 20:06

Shockwave Lights Redux

Post by diogo180794 »

Hi there! I've been trying to have Shockwave Lights Redux working properly on Project Airbus A321. I've found so many configs online, but no one has the green and red nav lights which I want to add. I've tried to add them, but they are out of the place. I've tried o change the values a lot of times, but I can't put the green and red nav lights on the wing, right next to the strobe.

Another question... As i want to put the red and gree nav light, I want to disable the blue and red that are already there. How can I do it?

Cheers...

MY CONFIG:
[lights]
//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing 6=taxi, 7=recognition, 8=wing, 9=logo
light.0 = 3, -77.90, -0.15, 4.80, fx_shockwave_navwhi_l ,
light.1 = 2, -77.90, 0.15, 4.80, fx_shockwave_strobe_l ,
light.2 = 1, 6.80, 0.00, -5.70, fx_shockwave_beaconb ,
light.3 = 1, 3.83, 0.00, 8.47, fx_shockwave_beaconh ,
light.4 = 4, 58.00, 0.00, 3.50, fx_vclighth ,
light.5 = 5, 11.57, -10.48 , -5.91, fx_PAland ,
light.6 = 5, 11.57, 10.48, -5.91, fx_PAland ,
light.7 = 9, -67.88, 8.99, 18.45, fx_pa380logo
light.8 = 9, -67.88, -8.99, 18.45, fx_pa380logo
light.9 = 3, -11.57, -30.48, 4.80, fx_shockwave_navred_nl [I'VE CHANGE THIS VALUES A LOT OF TIMES, BUT I CAN'T PUT THEM RIGHT NEXT TO THE FLASHING STROBE ON THE WING]
light.10 = 3, -11.57, 30.48, 4.80, fx_shockwave_navgre_nl [I'VE CHANGE THIS VALUES A LOT OF TIMES, BUT I CAN'T PUT THEM RIGHT NEXT TO THE FLASHING STROBE ON THE WING]

light.11 = 5, 0.50, 7.00, -3.75, fx_shockwave_landing_light_narrow_down ,
light.12 = 5, 0.50, -7.00, -3.75, fx_shockwave_landing_light_narrow_down ,
light.13 = 6, 51.50, 0.00, -6.00, fx_shockwave_landing_light_a321_nose

diogo180794
Posts: 13
Joined: 07 Sep 2011, 20:06

Re: Shockwave Lights Redux

Post by diogo180794 »

EDIT:

I've managed to put the green and red nav on the right place, but the lights don't go along with the wing movements. They are still. So my question is. Is there a way to add the green and red navigation lights to the plane? Because the ones I have, are blue and red, and they should be green and red.

Cheers

Derek Mayer
Posts: 236
Joined: 02 Jul 2009, 16:13

Re: Shockwave Lights Redux

Post by Derek Mayer »

These are hardcoded lights. According to the Shockwave site you will need to physically overwrite the default fx files in the \effects folder. Remove the light.9 and light.10 entries or you will have duplicates in the sim.

http://shockwaveproductions.com/forum/v ... 32&t=10131

The wing strobes use the white nav light effect. The other effect dependencies you'll probably figure out your own.

Post Reply