Page 1 of 1
PA A380 wingview points (FS9)
Posted: 30 Jun 2010, 02:28
by Matt Tank
Hey guys, since theres all the hype about the PA A380 I made up these custom wingviews, pretty sure theyre close to real seating points
Code: Select all
[VIEWS]
VIEW_FORWARD_WINDOWS=MAIN_PANEL,GPS_PANEL,40
VIEW_FORWARD_RIGHT_EYE=-0.300, -0.200, -50.000
VIEW_FORWARD_RIGHT_DIR=3.000, 0.000, 70.000
VIEW_RIGHT_EYE=-1.800, -0.800, -35.000
VIEW_RIGHT_DIR=3.000, 0.000, 90.000
VIEW_REAR_RIGHT_EYE=1.900, 2.000, -10.000
VIEW_REAR_RIGHT_DIR=12.000, 0.000, 126.000
VIEW_REAR_LEFT_EYE=-1.000, -0.800, -5.000
VIEW_REAR_LEFT_DIR=7.000, 0.000, 223.500
VIEW_LEFT_EYE=2.800, -0.800, -35.000
VIEW_LEFT_DIR=3.000, 0.000, 264.000
VIEW_FORWARD_LEFT_EYE=0.300, 2.300, -50.000
VIEW_FORWARD_LEFT_DIR=10.000, 0.000, 293.000
Regards
Matt
Re: PA A380 wingview points (FS9)
Posted: 30 Jun 2010, 06:58
by Tom Collins
Nice one Matt, although some of those last ones look a little too high to be main deck (and too low to be upper deck) - bear in mind the ref position will be the flight deck i.e. between floors.
Re: PA A380 wingview points (FS9)
Posted: 30 Jun 2010, 07:26
by Matt Tank
I'll get to work on them again, not right now, and when i got it i'll upload for people to test
Re: PA A380 wingview points (FS9)
Posted: 30 Jun 2010, 12:13
by seaheroz
AAAAAHHHH,,, how to put the code in the aicraft.cfg ? and does it work for FSX ?
Re: PA A380 wingview points (FS9)
Posted: 30 Jun 2010, 12:24
by Delta777
You don't put it the aircraft.cfg, but in the panel.cfg!
Re: PA A380 wingview points (FS9)
Posted: 30 Jun 2010, 12:35
by Matt Tank
yeah you put it in the panel.cfg and i have no idea if it works in FSX, I use FS9
Regards
Matt
Re: PA A380 wingview points (FS9)
Posted: 30 Jun 2010, 12:52
by Matt Tank
Ok get the newer, extremely accurate view points in the original post.
Regards
Matt
Re: PA A380 wingview points (FS9)
Posted: 30 Jun 2010, 13:27
by seaheroz
doesn't work for me 0.0
Re: PA A380 wingview points (FS9)
Posted: 30 Jun 2010, 14:59
by Matt Tank
seaheroz wrote:doesn't work for me 0.0
walk me through what your doing and show me your panel.cfg.
regards
Matt
Re: PA A380 wingview points (FS9)
Posted: 30 Jun 2010, 15:08
by seaheroz
Matt Tank wrote:seaheroz wrote:doesn't work for me 0.0
walk me through what your doing and show me your panel.cfg.
regards
Matt
i just paste the code into the panel.cfg
Re: PA A380 wingview points (FS9)
Posted: 30 Jun 2010, 16:07
by Matt Tank
did you get rid of the views section thats already in your panel.cfg or did you leave those there?
you have to overwrite the views section thats already in the .cfg
Regards
Matt
Re: PA A380 wingview points (FS9)
Posted: 01 Jul 2010, 08:53
by Simaerobatic
seaheroz wrote:doesn't work for me 0.0
does the other view points work :?:
and will that view point mod work the included panel.cfg mean can I add it below the alias inluded panel.cfg which is aliased to MS default 747 :?:
Matt their is no view section in PA A380 panel.cfg it aliased to MS default 747
BR
Thomas
Re: PA A380 wingview points (FS9)
Posted: 01 Jul 2010, 08:59
by anonymouse91
Simaerobatic wrote:seaheroz wrote:doesn't work for me 0.0
does the other view points work :?:
and will that view point mod work the included panel.cfg mean can I add it below the alias inluded panel.cfg which is aliased to MS default 747 :?:
BR
Thomas
As the panel.cfg is just referencing the 747's panel, I think you have to copy the contents of the 747's panel folder over (let it overwrite panel.cfg) and then add the wingviews to the cfg file. Someone correct me if I am wrong
Re: PA A380 wingview points (FS9)
Posted: 01 Jul 2010, 09:05
by Matt Tank
No thats right, sorry, forgot that people are using the default 744 panel, if you want these wingviews you have to put the default 744 in the panel folder of your A380 (not aliased) and then paste the views in there.
Regards
Matt
Re: PA A380 wingview points (FS9)
Posted: 01 Jul 2010, 13:05
by Simaerobatic
Matt your wing views are awesome thanks for sharing
BR
Thomas
Re: PA A380 wingview points (FS9)
Posted: 01 Jul 2010, 16:01
by Matt Tank
no problem.
Regards
Matt
Re: PA A380 wingview points (FS9)
Posted: 22 Sep 2012, 09:39
by Pilot1996
Matt Tank wrote:did you get rid of the views section thats already in your panel.cfg or did you leave those there?
you have to overwrite the views section thats already in the .cfg
Regards
Matt
Hi. Im using FSX for this and I want to install these wing views but my panel.cfg only says this:
Could someone please explain precisely how to install these wingviews?
Thanks!