Ok AirbusFan,
I am at my office, without Flight sim
but At fisrt sight, all seems Ok.
few remarks that do not cause problems:
I post you Your SID_data file because it can be used for everyone :
18,ERIVA 4E,178,0,1200,1200,6000,0,0,2,1,V,EV,,RIX,,,2,W,EV,,ERIVA,,
18,TUSAS 5E,178,0,1200,1200,6000,0,0,2,1,V,EV,,RIX,,,2,W,EV,,TUSAS,,
18,SAKTA 4E,178,0,1200,1200,6000,0,0,2,1,V,EV,,RIX,,,2,W,EV,,SAKTA,,
18,AMOLI 2E,178,0,1200,1200,6000,0,0,2,1,V,EV,,RIX,,,2,W,EV,,AMOLI,,
18,VANAGE 5E,178,0,1200,1200,6000,0,0,2,1,V,EV,,RIX,,,2,W,EV,,VANAGE,,
18,SOKVA 5E,178,0,1200,1200,6000,0,0,2,1,V,EV,,RIX,,,2,W,EV,,SOKVA,,
18,BERIL 3E,178,0,1200,1200,4000,0,0,2,1,V,EV,,RIX,,,2,W,EV,,BERIL,,
18,ASKOR 4E,178,0,1200,1200,4000,0,0,2,1,V,EV,,RIX,,,2,W,EV,,ASKOR,,
18,VALED 4E,178,0,1200,1200,4000,0,0,2,1,V,EV,,RIX,,,2,W,EV,,VALED,,
18,TENSI 5E,178,0,1200,1200,4000,0,0,2,1,V,EV,,RIX,,,2,W,EV,,TENSI,,
18,LAPSA 4E,178,0,1200,1200,4000,0,0,2,1,V,EV,,RIX,,,2,W,EV,,LAPSA,,
36,ERIVA 5G,358,0,1200,1200,4000,
10000,250,2,1,U,
EV,,RIA,56.920898,23.965200,2,W,EV,,ERIVA,,
36,TUSAS 6G,358,0,1200,1200,4000,
10000,250,2,1,U,
EV,,RIA,56.920898,23.965200,2,W,EV,,TUSAS,,
36,SAKTA 5G,358,0,1200,1200,4000
10000,250,2,1,U,
EV,,RIA,56.920898,23.965200,2,W,EV,,SAKTA,,
36,AMOLI 2G,358,0,1200,1200,4000
10000,250,2,1,U,
EV,,RIA,56.920898,23.965200,2,W,EV,,AMOLI,,
36,NAVAG 6G,358,0,1200,1200,4000,
10000,2500,2,1,U,
EV,,RIA,56.920898,23.965200,2,W,EV,,NAVAG,,
36,SOKVA 6G,358,0,1200,1200,4000,
10000,250,2,1,U,
EV,,RIA,56.920898,23.965200,2,W,EV,,SOKVA,,
36,VALED 4G,358,0,2000,5000,4000,
10000,250,2,1,U,
EV,,RIA,56.920898,23.965200,2,W,EV,,VALED,,
36,VALED 3J,358,0,2000,5000,4000,
10000,250,2,1,U,
EV,,RIA,56.920898,23.965200,2,W,EV,,VALED,,
36,ASKOR 4G,358,0,2000,5000,4000,
10000,250,2,1,U,
EV,,RIA,56.920898,23.965200,2,W,EV,,ASKOR,,
36,ASKOR 3J,358,0,2000,5000,4000,
10000,250,2,1,U,
EV,,RIA,56.920898,23.965200,2,W,EV,,ASKOR,,
36,BERIL 3G,358,0,2000,5000,4000,
10000,250,2,1,U,
EV,,RIA,56.920898,23.965200,2,W,EV,,BERIL,,
36,BERIL 3J,358,0,2000,5000,4000,
10000,250,2,1,U,
EV,,RIA,56.920898,23.965200,2,W,EV,,BERIL,,
36,LAPSA 5G,358,0,2000,5000,4000,
10000,250,2,1,U,
EV,,RIA,56.920898,23.965200,2,W,EV,,LAPSA,,
36,TENSI 6G,358,0,2000,5000,4000,
10000,250,2,1,U,
EV,,RIA,56.920898,23.965200,2,W,EV,,TENSI,,
SID data - EVRA - Riga intl. - Riga - Latvia.
v3.xx - June/2013
© Airbus Fan - FreeNav DB Group
Require the Graham Mitchell AIRAC update file : Update version 01032013 or later
Go to
http://www.gbmitch.net/ AIRAC © Graham Mitchell
In red color : For a user waypoint that is define by Longitude/latitude, it is not necessary to write the ICAO Region code, because this waypoint don't exist in the GPS database, this is your own creation, so you can let the field empty, without value.
10000,250 You have set a speed constraint according the altitude of 10000ft ; It is not necessary, because the FMS apply this rule by default (in all the world, liners can't exceed 250 kts below 10000ft. So the FMS manage this constraint automatically. You have just to set a speed constraint if the speed if less than 250 ft. So, you can leave these value, they do not cause bugs, but they are useless.
In blue color : Write your version file : 3.00 (for the future update).
To test your SID, you have two way.
1 way : test if there is a comma error :
Display the SID in the FMS widow and clik on the last SID ; If the waypoints are not displayed properly in the bottom of the FMS window, it means there is an error somewhere in the comma or the statements of waypoint numbers on each line of SID.
To find the sid line which has the error, click on the previous SID, and on the previous SID....until the waypoints are properly displayed : You have found the SID where the error is.
After this first test and if all is ok, you can test if all waypoints are OK.
For that,to find if there is an error in a waypoint name, create a direct flight plan from airport to any airport. Go to the Flight plan map of the FMS; you see on the list of the flight on the right of the window, only your 2 airports.
click on the first SID, and add it to your flight plan, : Waypoints are created; and click after on the DELETE SID button; waypoint must disappear and the 2 airports must stay. If the destination airport disappear (it stay only the departure aiport), it mean that a waypoint of your SID has an error and It has been not created, so check this SID.
I will test your SID tonight, when I go home.
Thank you
Francois