Project FMC simplified for Project Airbus
Re: Project FMC simplified for Project Airbus
Hi Wulf...Well, I had created folders in my main FSX Airplanes section inadvertently (I use F: Drive for my PA Airbuses..always worked OK) I thought, great' problem solved..but no. I deleted them. Here's the contents of the Panel.cfg. Apologies for missing it. Again, this is really odd.
Thanks
ZA
// Created by Francois Dore for Project Airbus A320 CFM Version
// Panel version beta 1.521 November 2016 - © Francois DORE
// A320_FMS_Main.xml is © Francois Dore 2016
// A320_FMS_Init.xml is © Francois Dore 2016
// A320_FMS_Com.xml is © Francois Dore 2016
// A32x_FMS_TO.xml is © Francois Dore 2016
// A32x_FMS_CL.xml is © Francois Dore 2016
// A3xx_FMS_CRZ.xml is © Francois Dore 2016
// A320_FMS_ILS.xml is © Francois Dore 2016
// A32x_FMS_DES.xml is © Francois Dore 2016
// A320_Fuel_system.xml is © Francois Dore 2016
// Save_FP.xml is © Francois Dore 2016
// A3xx_Autopilot.xml is © Francois Dore 2016
// A320_PFD.xml is © Francois Dore 2016
// A3xx_ILS.xml is © Francois Dore 2016
// A320_FMS_TOD.xml is © Francois Dore 2016
// FMS_SID.xml is © Francois Dore 2016
// FMS_STAR.xml is © Francois Dore 2016
// Save_FMS_Data.xml is © Francois Dore 2016
// Load_FMS_Data.xml is © Francois Dore 2016
// FMS_APPR_data.xml is © Francois Dore 2016
// FMS_APPR.xml is © Francois Dore 2016
// A3xx_Memo.xml is © Francois Dore 2016
// A3xx_LOC.xml is © Francois Dore 2016
// A32x_SFCC.xml is © Stefan Liebe has been modified and adapted with permission by Francois Dore
// Autoflare.xml is © Stefan Liebe has been modified and adapted with permission by Francois Dore
// A_Callout.xml is © Stefan Liebe has been modified and adapted with permission by Francois Dore
// If you have FSX, this panel requires the following module :
// -----------------------------------------------------------
// XMLTools.dll module version 2.0 © Tom Aguilo (for FSX). This Module include LoggerX.dll module © Robbie Mc Elrath
// If you have P3D V2.2 or upper you must use the following Modules :
// ------------------------------------------------------------------
// XMLTools3D.dll 1.0 (for P3D V2.2 or upper) - © Tom Aguilo
// LoggerX.dll module © Robbie Mc Elrath is required for P3D X2.2 or upper.
// see aircraft install manual to more information about these modules
// This panel works only with FSX SP2 or Acceleration Pack - or P3D V 1.4 or upper. It doesn't work with FS9
[Window Titles]
Window00=MAIN PANEL
Window01=RADIO STACK
Window02=GPS
Window03=THROTTLE
Window04=OVERHEAD
Window05=GEAR
Window06=FMS
Window07=PFD FULL SIZE
Window08=MFD FULL SIZE
Window09=ECAMS FULL SIZE
Window10=ECAMS 2 FULL SIZE
Window11=MINI PANEL
Window12=CLOCK
Window13=PAX VIEW (Cabin window)
[Window00]
file_1024=airbus_a321_panel_background.bmp
file_1024_night=airbus_a321_panel_background_night.bmp
size_mm=1024
position=7
visible=1
ident=MAIN_PANEL
Gauge00=A320_CFM!A32x_POPUP_ECAMS_SCREEN_BEZEL, 500,500,268,268
gauge01=A320_CFM!A32x_annunciator_panel, 24,357
gauge02=A320_CFM!A320_ECAMS2, 515,515,225,225
gauge03=A320_CFM!A3xx_autopilot, 677,346
gauge04=A320_CFM!A320_PFD, 23,521,215,214
gauge05=A320_CFM!A3xx_MFD, 264,521,215,214
gauge06=A320_CFM!A320_CFM_ECAMS, 788,521,215,214
gauge07=A320_CFM!A32x_PFD_MFD_SEL_PANEL, 470,345
gauge08=SimIcons1024!ECU Icon, 790, 745
gauge09=SimIcons1024!Overhead Icon, 812, 745
gauge10=SimIcons1024!Kneeboard Icon, 834, 745
gauge11=SimIcons1024!ATC Icon, 856, 745
gauge12=SimIcons1024!Map Icon, 878, 745
gauge13=SimIcons1024!GPS Icon, 900, 745
gauge14=SimIcons1024!Radio Icon, 922, 745
gauge15=SimIcons1024!Other Controls Icon, 944, 745
gauge16=SimIcons1024!Engine Instruments Icon, 966, 745
gauge17=SimIcons1024!Clock Icon, 988, 745
gauge18=n_number_plaque!n_number_plaque, 258,429,67,19
gauge19=A320FD-FMC!Save_FMS_Data, 0,0,1,1
//gauge20=A320FD-FMC!Debug, 1,1,600,200
[Window01]
size_mm=246,296
position=8
visible=0
BACKGROUND_COLOR=16,16,16
ident=RADIO_STACK_PANEL
gauge00=A320_CFM!popup_radio,0,0
[Window02]
size_mm=456,378
window_size=0.5
position=8
BACKGROUND_COLOR=0,0,0
VISIBLE=0
ident=GPS_PANEL
gauge00=fs9gps!gps_500,0,0
[Window03]
size_mm=279,479
position=0
visible=0
BACKGROUND_COLOR=0,0,0
ident=THROTTLE_PANEL
gauge00=A320_CFM!A32x_POPUP_ECU,0,0
[Window04]
size_mm=761,354
position=2
visible=0
BACKGROUND_COLOR=0,0,0
ident=OVERHEAD_PANEL
gauge00=A320_CFM!A32x_popup_overhead,0,0
[Window05]
size_mm=252,277
position=7
visible=0
BACKGROUND_COLOR=0,0,0
ident=MISC_POPUP_1
gauge00=A320_CFM!A32x_POPUP_GEAR,0,0
[Window06]
size_mm=1024,768
pixel_size=1024,768
position=4
visible=0
BACKGROUND_COLOR=0,0,0
ident=10101
gauge00=A320FD-FMC!A320_FMS_Main,0,0,1024,768
sizeable=0
[Window07]
Background_color=0,0,0
size_mm= 542,561
pixel_size=600,561
position=6
visible=0
ident=500
gauge00=A320_CFM!A320_PFD, 36,34,467,465
gauge01=A320_CFM!popup_pfd_mfd_screen_bezel,0,0,530,550
sizeable=1
[Window08]
Background_color=0,0,0
size_mm= 542,561
pixel_size=600,561
position=7
visible=0
ident=501
sizeable=1
gauge00=A320_CFM!popup_pfd_mfd_screen_bezel,0,0,530,550
gauge01=A320_CFM!A3xx_MFD,35,33,470,470
[Window09]
Background_color=0,0,0
size_mm= 542,561
pixel_size=600,561
position=8
visible=0
ident=502
sizeable=1
gauge00=A320_CFM!popup_pfd_mfd_screen_bezel,0,0,530,550
gauge01=A320_CFM!A320_CFM_ECAMS,27,24,477,475
[Window10]
Background_color=0,0,0
size_mm=542,561
pixel_size=600,561
position=8
visible=0
ident=503
sizeable=1
gauge00=A320_CFM!A32x_POPUP_ECAMS_SCREEN_BEZEL,0,0,530,550
gauge01=A320_CFM!A320_ECAMS2,27,24,477,475
[Window11]
position=7
size_mm=530,260
child_3d=1
background_color=0,0,0
sizeable=1
ident=MINIPANEL
gauge00=A320_CFM!popup_pfd_mfd_screen_bezel,0,0,260,260
gauge01=A320_CFM!A320_PFD,23,18,215,214
gauge02=A320_CFM!popup_pfd_mfd_screen_bezel,262,0,260,260
gauge03=A320_CFM!A3xx_MFD,285,18,215,214
[Window12]
size_mm=105,105
position=6
visible=0
BACKGROUND_COLOR=0,0,0
ident=270
gauge00=A320_CFM!popup_clock,0,0
[Window13]
file_1024=Window_R.bmp
Background_color=0,0,0
size_mm=1360
window_size_ratio=0.250
position=7
visible=0
ident=10021
window_size= 1, 1
window_pos= 0
//sizeable=0
[VCockpit01]
size_mm=1024,1024
pixel_size=1024,1024
texture=$A321_1
background_color=0,0,0
visible=1
gauge00=A320_CFM!A32x_popup_overhead,1,1,761,354
gauge01=A320_CFM!hsi_backup,859,735,114,135
gauge02=A320_CFM!A320_ECAMS2,2,356,283,282
gauge03=A320_CFM!A320_CFM_ECAMS,2,639,283,282
gauge04=A320_CFM!attitude_backup,858,518,105,104
gauge05=A320_CFM!A32x_annunciator_panel,574,412,438,103
gauge06=A320_CFM!ias_backup,4,941,79,79
gauge07=A320_CFM!altimeter_backup,91,940,79,80
gauge08=A320_CFM!popup_radio,765,114,246,296
gauge09=A320_CFM!A32x_POPUP_ECU,576,517,279,479
gauge10=A320_CFM!popup_clock,859,626,105,105
gauge11=A320_CFM!A32x_PFD_MFD_SEL_PANEL,765,1,207,110
gauge12=A320_CFM!A320_PFD,287,357,283,282
gauge13=A320_CFM!A3xx_MFD,287,640,285,285
gauge14=n_number_plaque!n_number_plaque,574,360,89,25
gauge15=A320_CFM!A32x_SFCC,0,0,1,1
gauge16=A320FD-FMC!A320_AUTOFLARE,0,0,1,1
gauge17=CALLOUT_SOUND!dsd_xml_sound3, 0,0,0,0,./Sound/CALLOUT_FD/Sound.ini
gauge18=A320_CFM!A_CALLOUT, 0,0,1,1
gauge19=A320FD-FMC!A320_Fuel_system,0,0,1,1
gauge20=A320FD-FMC!Save_FP,0,0,1,1
gauge21=A320FD-FMC!A3xx_ILS,0,0,1,1
gauge22=A320FD-FMC!A320_FMS_init,0,0,1,1
gauge23=A320FD-FMC!A32x_FMS_TO,0,0,1,1
gauge24=A320FD-FMC!A32x_FMS_CL,0,0,1,1
gauge25=A320FD-FMC!A3xx_FMS_CRZ,0,0,1,1
gauge26=A320FD-FMC!A320_FMS_Com,0,0,1,1
gauge27=A320FD-FMC!A320_FMS_TOD,0,0,1,1
gauge28=A320FD-FMC!FMS_SID,0,0,1,1
gauge29=A320FD-FMC!FMS_STAR,0,0,1,1
gauge30=A320FD-FMC!Save_FMS_Data,0,0,1,1
gauge31=A320FD-FMC!Load_FMS_Data,0,0,1,1
gauge32=A320FD-FMC!FMS_APPR_data,0,0,1,1
gauge33=A320FD-FMC!FMS_APPR,0,0,1,1
gauge34=A320FD-FMC!A3xx_Memo,0,0,1,1
gauge35=A320FD-FMC!A3xx_LOC,0,0,1,1
gauge36=A320FD-FMC!A32x_FMS_DES,0,0,1,1
//gauge37=A320FD-FMC!FMC_monitoring,0,0,1,1
//gauge38=fsx_event_logger!event_logger,858,518,120,73
[VCockpit02]
size_mm=512,512
pixel_size=512,512
texture=$A321_2
background_color=0,0,0
visible=1
gauge00=A320_CFM!A32x_POPUP_GEAR,19,12,252,277
gauge01=A320_CFM!A3xx_autopilot,19,297,339,110
[VCockpit03]
size_mm=512,512
pixel_size=512,512
texture=$VCRain
background_color=0,0,0
visible=0
gauge00=VCRain!VCRain, 0,0,512,512
[Default View]
X=0
Y=0
SIZE_X=8192
SIZE_Y=3250
[Color]
Day=255,255,255
Night=255,255,255
Luminous=147,64,64
Thanks
ZA
// Created by Francois Dore for Project Airbus A320 CFM Version
// Panel version beta 1.521 November 2016 - © Francois DORE
// A320_FMS_Main.xml is © Francois Dore 2016
// A320_FMS_Init.xml is © Francois Dore 2016
// A320_FMS_Com.xml is © Francois Dore 2016
// A32x_FMS_TO.xml is © Francois Dore 2016
// A32x_FMS_CL.xml is © Francois Dore 2016
// A3xx_FMS_CRZ.xml is © Francois Dore 2016
// A320_FMS_ILS.xml is © Francois Dore 2016
// A32x_FMS_DES.xml is © Francois Dore 2016
// A320_Fuel_system.xml is © Francois Dore 2016
// Save_FP.xml is © Francois Dore 2016
// A3xx_Autopilot.xml is © Francois Dore 2016
// A320_PFD.xml is © Francois Dore 2016
// A3xx_ILS.xml is © Francois Dore 2016
// A320_FMS_TOD.xml is © Francois Dore 2016
// FMS_SID.xml is © Francois Dore 2016
// FMS_STAR.xml is © Francois Dore 2016
// Save_FMS_Data.xml is © Francois Dore 2016
// Load_FMS_Data.xml is © Francois Dore 2016
// FMS_APPR_data.xml is © Francois Dore 2016
// FMS_APPR.xml is © Francois Dore 2016
// A3xx_Memo.xml is © Francois Dore 2016
// A3xx_LOC.xml is © Francois Dore 2016
// A32x_SFCC.xml is © Stefan Liebe has been modified and adapted with permission by Francois Dore
// Autoflare.xml is © Stefan Liebe has been modified and adapted with permission by Francois Dore
// A_Callout.xml is © Stefan Liebe has been modified and adapted with permission by Francois Dore
// If you have FSX, this panel requires the following module :
// -----------------------------------------------------------
// XMLTools.dll module version 2.0 © Tom Aguilo (for FSX). This Module include LoggerX.dll module © Robbie Mc Elrath
// If you have P3D V2.2 or upper you must use the following Modules :
// ------------------------------------------------------------------
// XMLTools3D.dll 1.0 (for P3D V2.2 or upper) - © Tom Aguilo
// LoggerX.dll module © Robbie Mc Elrath is required for P3D X2.2 or upper.
// see aircraft install manual to more information about these modules
// This panel works only with FSX SP2 or Acceleration Pack - or P3D V 1.4 or upper. It doesn't work with FS9
[Window Titles]
Window00=MAIN PANEL
Window01=RADIO STACK
Window02=GPS
Window03=THROTTLE
Window04=OVERHEAD
Window05=GEAR
Window06=FMS
Window07=PFD FULL SIZE
Window08=MFD FULL SIZE
Window09=ECAMS FULL SIZE
Window10=ECAMS 2 FULL SIZE
Window11=MINI PANEL
Window12=CLOCK
Window13=PAX VIEW (Cabin window)
[Window00]
file_1024=airbus_a321_panel_background.bmp
file_1024_night=airbus_a321_panel_background_night.bmp
size_mm=1024
position=7
visible=1
ident=MAIN_PANEL
Gauge00=A320_CFM!A32x_POPUP_ECAMS_SCREEN_BEZEL, 500,500,268,268
gauge01=A320_CFM!A32x_annunciator_panel, 24,357
gauge02=A320_CFM!A320_ECAMS2, 515,515,225,225
gauge03=A320_CFM!A3xx_autopilot, 677,346
gauge04=A320_CFM!A320_PFD, 23,521,215,214
gauge05=A320_CFM!A3xx_MFD, 264,521,215,214
gauge06=A320_CFM!A320_CFM_ECAMS, 788,521,215,214
gauge07=A320_CFM!A32x_PFD_MFD_SEL_PANEL, 470,345
gauge08=SimIcons1024!ECU Icon, 790, 745
gauge09=SimIcons1024!Overhead Icon, 812, 745
gauge10=SimIcons1024!Kneeboard Icon, 834, 745
gauge11=SimIcons1024!ATC Icon, 856, 745
gauge12=SimIcons1024!Map Icon, 878, 745
gauge13=SimIcons1024!GPS Icon, 900, 745
gauge14=SimIcons1024!Radio Icon, 922, 745
gauge15=SimIcons1024!Other Controls Icon, 944, 745
gauge16=SimIcons1024!Engine Instruments Icon, 966, 745
gauge17=SimIcons1024!Clock Icon, 988, 745
gauge18=n_number_plaque!n_number_plaque, 258,429,67,19
gauge19=A320FD-FMC!Save_FMS_Data, 0,0,1,1
//gauge20=A320FD-FMC!Debug, 1,1,600,200
[Window01]
size_mm=246,296
position=8
visible=0
BACKGROUND_COLOR=16,16,16
ident=RADIO_STACK_PANEL
gauge00=A320_CFM!popup_radio,0,0
[Window02]
size_mm=456,378
window_size=0.5
position=8
BACKGROUND_COLOR=0,0,0
VISIBLE=0
ident=GPS_PANEL
gauge00=fs9gps!gps_500,0,0
[Window03]
size_mm=279,479
position=0
visible=0
BACKGROUND_COLOR=0,0,0
ident=THROTTLE_PANEL
gauge00=A320_CFM!A32x_POPUP_ECU,0,0
[Window04]
size_mm=761,354
position=2
visible=0
BACKGROUND_COLOR=0,0,0
ident=OVERHEAD_PANEL
gauge00=A320_CFM!A32x_popup_overhead,0,0
[Window05]
size_mm=252,277
position=7
visible=0
BACKGROUND_COLOR=0,0,0
ident=MISC_POPUP_1
gauge00=A320_CFM!A32x_POPUP_GEAR,0,0
[Window06]
size_mm=1024,768
pixel_size=1024,768
position=4
visible=0
BACKGROUND_COLOR=0,0,0
ident=10101
gauge00=A320FD-FMC!A320_FMS_Main,0,0,1024,768
sizeable=0
[Window07]
Background_color=0,0,0
size_mm= 542,561
pixel_size=600,561
position=6
visible=0
ident=500
gauge00=A320_CFM!A320_PFD, 36,34,467,465
gauge01=A320_CFM!popup_pfd_mfd_screen_bezel,0,0,530,550
sizeable=1
[Window08]
Background_color=0,0,0
size_mm= 542,561
pixel_size=600,561
position=7
visible=0
ident=501
sizeable=1
gauge00=A320_CFM!popup_pfd_mfd_screen_bezel,0,0,530,550
gauge01=A320_CFM!A3xx_MFD,35,33,470,470
[Window09]
Background_color=0,0,0
size_mm= 542,561
pixel_size=600,561
position=8
visible=0
ident=502
sizeable=1
gauge00=A320_CFM!popup_pfd_mfd_screen_bezel,0,0,530,550
gauge01=A320_CFM!A320_CFM_ECAMS,27,24,477,475
[Window10]
Background_color=0,0,0
size_mm=542,561
pixel_size=600,561
position=8
visible=0
ident=503
sizeable=1
gauge00=A320_CFM!A32x_POPUP_ECAMS_SCREEN_BEZEL,0,0,530,550
gauge01=A320_CFM!A320_ECAMS2,27,24,477,475
[Window11]
position=7
size_mm=530,260
child_3d=1
background_color=0,0,0
sizeable=1
ident=MINIPANEL
gauge00=A320_CFM!popup_pfd_mfd_screen_bezel,0,0,260,260
gauge01=A320_CFM!A320_PFD,23,18,215,214
gauge02=A320_CFM!popup_pfd_mfd_screen_bezel,262,0,260,260
gauge03=A320_CFM!A3xx_MFD,285,18,215,214
[Window12]
size_mm=105,105
position=6
visible=0
BACKGROUND_COLOR=0,0,0
ident=270
gauge00=A320_CFM!popup_clock,0,0
[Window13]
file_1024=Window_R.bmp
Background_color=0,0,0
size_mm=1360
window_size_ratio=0.250
position=7
visible=0
ident=10021
window_size= 1, 1
window_pos= 0
//sizeable=0
[VCockpit01]
size_mm=1024,1024
pixel_size=1024,1024
texture=$A321_1
background_color=0,0,0
visible=1
gauge00=A320_CFM!A32x_popup_overhead,1,1,761,354
gauge01=A320_CFM!hsi_backup,859,735,114,135
gauge02=A320_CFM!A320_ECAMS2,2,356,283,282
gauge03=A320_CFM!A320_CFM_ECAMS,2,639,283,282
gauge04=A320_CFM!attitude_backup,858,518,105,104
gauge05=A320_CFM!A32x_annunciator_panel,574,412,438,103
gauge06=A320_CFM!ias_backup,4,941,79,79
gauge07=A320_CFM!altimeter_backup,91,940,79,80
gauge08=A320_CFM!popup_radio,765,114,246,296
gauge09=A320_CFM!A32x_POPUP_ECU,576,517,279,479
gauge10=A320_CFM!popup_clock,859,626,105,105
gauge11=A320_CFM!A32x_PFD_MFD_SEL_PANEL,765,1,207,110
gauge12=A320_CFM!A320_PFD,287,357,283,282
gauge13=A320_CFM!A3xx_MFD,287,640,285,285
gauge14=n_number_plaque!n_number_plaque,574,360,89,25
gauge15=A320_CFM!A32x_SFCC,0,0,1,1
gauge16=A320FD-FMC!A320_AUTOFLARE,0,0,1,1
gauge17=CALLOUT_SOUND!dsd_xml_sound3, 0,0,0,0,./Sound/CALLOUT_FD/Sound.ini
gauge18=A320_CFM!A_CALLOUT, 0,0,1,1
gauge19=A320FD-FMC!A320_Fuel_system,0,0,1,1
gauge20=A320FD-FMC!Save_FP,0,0,1,1
gauge21=A320FD-FMC!A3xx_ILS,0,0,1,1
gauge22=A320FD-FMC!A320_FMS_init,0,0,1,1
gauge23=A320FD-FMC!A32x_FMS_TO,0,0,1,1
gauge24=A320FD-FMC!A32x_FMS_CL,0,0,1,1
gauge25=A320FD-FMC!A3xx_FMS_CRZ,0,0,1,1
gauge26=A320FD-FMC!A320_FMS_Com,0,0,1,1
gauge27=A320FD-FMC!A320_FMS_TOD,0,0,1,1
gauge28=A320FD-FMC!FMS_SID,0,0,1,1
gauge29=A320FD-FMC!FMS_STAR,0,0,1,1
gauge30=A320FD-FMC!Save_FMS_Data,0,0,1,1
gauge31=A320FD-FMC!Load_FMS_Data,0,0,1,1
gauge32=A320FD-FMC!FMS_APPR_data,0,0,1,1
gauge33=A320FD-FMC!FMS_APPR,0,0,1,1
gauge34=A320FD-FMC!A3xx_Memo,0,0,1,1
gauge35=A320FD-FMC!A3xx_LOC,0,0,1,1
gauge36=A320FD-FMC!A32x_FMS_DES,0,0,1,1
//gauge37=A320FD-FMC!FMC_monitoring,0,0,1,1
//gauge38=fsx_event_logger!event_logger,858,518,120,73
[VCockpit02]
size_mm=512,512
pixel_size=512,512
texture=$A321_2
background_color=0,0,0
visible=1
gauge00=A320_CFM!A32x_POPUP_GEAR,19,12,252,277
gauge01=A320_CFM!A3xx_autopilot,19,297,339,110
[VCockpit03]
size_mm=512,512
pixel_size=512,512
texture=$VCRain
background_color=0,0,0
visible=0
gauge00=VCRain!VCRain, 0,0,512,512
[Default View]
X=0
Y=0
SIZE_X=8192
SIZE_Y=3250
[Color]
Day=255,255,255
Night=255,255,255
Luminous=147,64,64
-
- Posts: 501
- Joined: 20 Jan 2014, 21:27
Re: Project FMC simplified for Project Airbus
zaflyer wrote:Hi Wulf...Well, I had created folders in my main FSX Airplanes section inadvertently (I use F: Drive for my PA Airbuses..always worked OK) I thought, great' problem solved..but no. I deleted them. Here's the contents of the Panel.cfg. Apologies for missing it. Again, this is really odd.
Thanks
ZA
The panel.cfg content looks ok for me. So I recommend to recheck your driver allocation issue mentioned above. I always install all my scenery addons and add. aircraft directly into the FSX folder. Otherwise there might be registration conflicts.
Re: Project FMC simplified for Project Airbus
OK..Thanks Wulf...I'll uninstall them and re-install to where they should be. Might male a difference.
I'll keep you posted as to when I finally crack this....As Tanya Wilcox once sang.."It's mystery..."
Cheers for your help.
ZA
I'll keep you posted as to when I finally crack this....As Tanya Wilcox once sang.."It's mystery..."
Cheers for your help.
ZA
Re: Project FMC simplified for Project Airbus
This is very curious, because MFD and upper ECAM are very classic XML gauge (no needs of external DLL). So, I don't see why you get this problem !!
Same issue in VC ?
Same issue in VC ?
Re: Project FMC simplified for Project Airbus
New airports are online : http://freenavdbgroup.com/?p=1215
New airports :
EGLC - London City Airport - UNITED KINGDOM by francois Dore : version for FSX/P3D stock airport
EGLC - London City Airport - UNITED KINGDOM by francois Dore : version for updated AFCAD or addon scenery with new runway designator
ENML - Molde/Aro - NORWAY by Philippe Bronier : provided with an AFCAD which add missing ILS
KMDW - Chicago Midway Intl - USA (Illinois) by francois Dore
LUKK - Chisinau Intl - MOLDAVIA by Philippe Bronier
RJCC - New Chitose Sapporo intl - JAPAN by francois Dore
UDYZ - Zvartnots - ARMENIA by Georges
please, note that EGLC has very high glide path profil (5.5°) : don't use autoland feature ! So in real life, this airport is reserved to small jet aircraft (category B and C) except BAE146 which is authorized. But you can take off and landing with A318/A319.
Caution : short runway and very high glide path angle ! no autoland please !!
Airports updated or fixed : January 2, 2017
KBUR 4.01 - Burbank Bob Hope - USA (California) by Wulf Bindewald
KVNY 4.01 - Van Nuys Intl - USA (California) by Wulf Bindewald
KWYS 4.03 - Yellowstone - USA (Wyoming) by Wulf Bindewald
PAJN 4.13 - Juneau - USA (Alaska) by Wulf Bindewald
PASI 4.02 - Sitka Rocky Gutierrez - USA (Alaska) by wulf Bindewald
LIPE 4.01 - Bologna - ITALY by Francesco Bragagnolo
LIPE is now provided with an updated AFCAD to add missing RWY 30 ILS.
Next airport will be :
LROP (Bucuresti/Henri Coanda – Romania)
LZKZ (Kosice – Slovak Republic)
URSS Sotchi (Russia)
EGLL Heathrow update (United Kingdom)
LTAI Antalya (Turkey)
........
New airports :
EGLC - London City Airport - UNITED KINGDOM by francois Dore : version for FSX/P3D stock airport
EGLC - London City Airport - UNITED KINGDOM by francois Dore : version for updated AFCAD or addon scenery with new runway designator
ENML - Molde/Aro - NORWAY by Philippe Bronier : provided with an AFCAD which add missing ILS
KMDW - Chicago Midway Intl - USA (Illinois) by francois Dore
LUKK - Chisinau Intl - MOLDAVIA by Philippe Bronier
RJCC - New Chitose Sapporo intl - JAPAN by francois Dore
UDYZ - Zvartnots - ARMENIA by Georges
please, note that EGLC has very high glide path profil (5.5°) : don't use autoland feature ! So in real life, this airport is reserved to small jet aircraft (category B and C) except BAE146 which is authorized. But you can take off and landing with A318/A319.
Caution : short runway and very high glide path angle ! no autoland please !!
Airports updated or fixed : January 2, 2017
KBUR 4.01 - Burbank Bob Hope - USA (California) by Wulf Bindewald
KVNY 4.01 - Van Nuys Intl - USA (California) by Wulf Bindewald
KWYS 4.03 - Yellowstone - USA (Wyoming) by Wulf Bindewald
PAJN 4.13 - Juneau - USA (Alaska) by Wulf Bindewald
PASI 4.02 - Sitka Rocky Gutierrez - USA (Alaska) by wulf Bindewald
LIPE 4.01 - Bologna - ITALY by Francesco Bragagnolo
LIPE is now provided with an updated AFCAD to add missing RWY 30 ILS.
Next airport will be :
LROP (Bucuresti/Henri Coanda – Romania)
LZKZ (Kosice – Slovak Republic)
URSS Sotchi (Russia)
EGLL Heathrow update (United Kingdom)
LTAI Antalya (Turkey)
........
Last edited by fdd_fr on 04 Dec 2016, 18:03, edited 1 time in total.
Re: Project FMC simplified for Project Airbus
Hello,
All panels (v1.55) are completed (with all bug fixed, I hope) : A318 A319 A320 and A321. Wulf has wrote the last TOD formula for A319.
So, I will prepare during the week the four packages + one full pack with all aircrafts and I will upload them to AVSIM library friday.
So, I hope that definitive aircrafts will be available next Saturday.
Francois
All panels (v1.55) are completed (with all bug fixed, I hope) : A318 A319 A320 and A321. Wulf has wrote the last TOD formula for A319.
So, I will prepare during the week the four packages + one full pack with all aircrafts and I will upload them to AVSIM library friday.
So, I hope that definitive aircrafts will be available next Saturday.
Francois
-
- Posts: 6
- Joined: 17 Nov 2016, 15:00
Re: Project FMC simplified for Project Airbus
When will the new VC with updates FCU be released?
Re: Project FMC simplified for Project Airbus
Hi...Fancois
"This is very curious, because MFD and upper ECAM are very classic XML gauge (no needs of external DLL). So, I don't see why you get this problem !!
Same issue in VC ?"
Yes...Same problem..all the dials etc are 'dead' Other AC work. Now I've got more time..I'm going to try again with latest version (1.521 I think) A clean download and install.
"This is very curious, because MFD and upper ECAM are very classic XML gauge (no needs of external DLL). So, I don't see why you get this problem !!
Same issue in VC ?"
Yes...Same problem..all the dials etc are 'dead' Other AC work. Now I've got more time..I'm going to try again with latest version (1.521 I think) A clean download and install.
Re: Project FMC simplified for Project Airbus
Correction..I'll get the one from AVSIM:
pa_a320fd-fmc_iae_cfm_331210.zip
Then see where it gets me. I'll try to get the basics working first
ZA
pa_a320fd-fmc_iae_cfm_331210.zip
Then see where it gets me. I'll try to get the basics working first
ZA
Re: Project FMC simplified for Project Airbus
Hi There..
Well did a complete new install into my main FSX folder...Still not working..I'm concerned I've got a fundamental problem in my FSX. This is very odd, as it was OK before I tried to update the panel.
Thanks guys for your efforts
ZA
Well did a complete new install into my main FSX folder...Still not working..I'm concerned I've got a fundamental problem in my FSX. This is very odd, as it was OK before I tried to update the panel.
Thanks guys for your efforts
ZA
-
- Posts: 501
- Joined: 20 Jan 2014, 21:27
Re: Project FMC simplified for Project Airbus
Does the FSX default A321 work properly (w/o the FDD panel)?
Re: Project FMC simplified for Project Airbus
Hi Wulf..
Thanks for getting back...Yep.. The default looks fine. I've not touched that. As is. (default) I'm wondering about the XML Tools.zip. I've got 'XML Tools DLL file in the main folder (FSX) There's another folder 'XML Tools' with a list of 'XML Documents in it..The other folder which is confusing is the C++ Redistr. Have they got anything to do with this problem?
Thanks
ZA
Thanks for getting back...Yep.. The default looks fine. I've not touched that. As is. (default) I'm wondering about the XML Tools.zip. I've got 'XML Tools DLL file in the main folder (FSX) There's another folder 'XML Tools' with a list of 'XML Documents in it..The other folder which is confusing is the C++ Redistr. Have they got anything to do with this problem?
Thanks
ZA
-
- Posts: 501
- Joined: 20 Jan 2014, 21:27
Re: Project FMC simplified for Project Airbus
There should be only one XMLTools.dll file reside in the FSX root folder.
Maybe the "XMLTools" folder in the installer under "Modulus_required" is the content from the XMLTools.dll file and as such for info.
Maybe the "XMLTools" folder in the installer under "Modulus_required" is the content from the XMLTools.dll file and as such for info.
Re: Project FMC simplified for Project Airbus
I've only got the XML Tools .dll in the main FSX folder...I checked the A320FD-FMC .cab file and it's this version:
© Francois DORE version 1.00 September,25th 2015 ..I'm beginning to lose hope..
Thanks
ZA
© Francois DORE version 1.00 September,25th 2015 ..I'm beginning to lose hope..
Thanks
ZA
Re: Project FMC simplified for Project Airbus
Hello Zaflyer,
I think that XMLTools is not a problem, because XMLTools is required only by FMC gauges. PFD, ND and ECAMS can works without XMLTools.
Wait until next weekend. Final panel will be available with full pack for each aircraft (A318, A19, A320, A321).
I think that the best way for you will be to delete all previous version and install the new packs 1.55 with the setup program.
Francois
I think that XMLTools is not a problem, because XMLTools is required only by FMC gauges. PFD, ND and ECAMS can works without XMLTools.
Wait until next weekend. Final panel will be available with full pack for each aircraft (A318, A19, A320, A321).
I think that the best way for you will be to delete all previous version and install the new packs 1.55 with the setup program.
Francois
Re: Project FMC simplified for Project Airbus
Hello Francois..
Thanks for the advice. I know you're busy. So I'll wait 'til the weekend..in the meantime..I'll remove everything. Look forward to the weekend. I miss your Airbus.
Thanks
ZA
Thanks for the advice. I know you're busy. So I'll wait 'til the weekend..in the meantime..I'll remove everything. Look forward to the weekend. I miss your Airbus.
Thanks
ZA
Re: Project FMC simplified for Project Airbus
Good day, I need some help with the project airbus (sorry for my bad English). I downloaded A318 and 321 and all two planes run and fly perfectly in my PC (there are fantastic planes!). But my problem is I can´t work with FMC. It is impossible to entry waypoints into the route, I followed step by step the manual and I think I completed all process (airac, xmltolls.dll, dll.xml, airports list, etc). The problem is when I try to entry a wp into the route, the FMC doesn´t accept any entry, nor RTE-fix, OWR-fix nor ND (the name that I wote disappear when I push button ADD , and strange: it is accept only VOR (!). The same is when I try to enter a SID (is the airport have a SID) in the DEPART screen, in the FMC appear then all the information about the SID, I select it one and I can see down all waypoints for the terminal, but when I push ADD SID (or ADD STAR) the program only accepts one or two waypoints and doesn’t completed the terminal route.
I had try out many things, but I can´t fix the problem (despair). I have windows 7, I build flight plans with FSCommander and then I save it in FSX format file (*pnl), FMC recognize the plan loaded without problem, but then I can´t add any new waypoints, except VOR (?), although it is accept DELETE any waypoints.
I´ll to appreciate any help for this topic.
Many thanks
Rosendo
I had try out many things, but I can´t fix the problem (despair). I have windows 7, I build flight plans with FSCommander and then I save it in FSX format file (*pnl), FMC recognize the plan loaded without problem, but then I can´t add any new waypoints, except VOR (?), although it is accept DELETE any waypoints.
I´ll to appreciate any help for this topic.
Many thanks
Rosendo
Re: Project FMC simplified for Project Airbus
Hello Rosendo,
Very curious; I don't see the reason of this strange bug.
- If when you add a SID, you have only some waypoints added, check if you have placed the AIRAC file in the right folder ("\Addon Scenery\Scenery\").
- Have you installed a third party waypoint database or changed the FSX stock files ?
- When you try to enter a waypoint with the FMC keyboard, do you think to select in first a position in the flight plan with the "#" key ?
- maybe waypoints that you try to enter have not the ICAO region code that you think. Your airport is near a boundary ?
- make a screenshot of the FMC just when you have enter your waypoint before click to add, and post here the picture.
Very curious; I don't see the reason of this strange bug.
- If when you add a SID, you have only some waypoints added, check if you have placed the AIRAC file in the right folder ("\Addon Scenery\Scenery\").
- Have you installed a third party waypoint database or changed the FSX stock files ?
- When you try to enter a waypoint with the FMC keyboard, do you think to select in first a position in the flight plan with the "#" key ?
- maybe waypoints that you try to enter have not the ICAO region code that you think. Your airport is near a boundary ?
- make a screenshot of the FMC just when you have enter your waypoint before click to add, and post here the picture.
Re: Project FMC simplified for Project Airbus
About aircrafts pack, sorry, there will be delayed to next weekend, because I found a bug in the approach mode if sleected altitude is used.
So, with a proposal of wulf, I added the TOD announcement on the bottom left corner of the ND, when the TOD is the next "waypoint/step" in cruise mode.
But I promise you, all full aircrafts packs will be available for christmass.
So, with a proposal of wulf, I added the TOD announcement on the bottom left corner of the ND, when the TOD is the next "waypoint/step" in cruise mode.
But I promise you, all full aircrafts packs will be available for christmass.
Re: Project FMC simplified for Project Airbus
No worries..Can't wait.
Re: Project FMC simplified for Project Airbus
Ohhh! Thank you very much for your help. I can solve the problem, very easy to fix but not easy to find. The solution was in your first question: “have you installed a third party waypoint database or changed the FSX stock files?”
Well, YES, one month ago I loaded (updated) navaids and ILS with SORS, web “Flight Simulator aircraft dynamic and navdate”. I use the automatic installer application BUT I FORGOT to place the bgl file (worldINT.bgl) in the folder /addon scenery/scenery. This was the BIG PROBLEM, the reason why I can fix FD-FMC, why I can´t added any waypoint into the flight plan and why SID and STAR doesn´t recognize some waypoints.
Now all is perfect and I can to fly that fantastic (work) planes.
Thank very much
Best regards,
Rosendo
Well, YES, one month ago I loaded (updated) navaids and ILS with SORS, web “Flight Simulator aircraft dynamic and navdate”. I use the automatic installer application BUT I FORGOT to place the bgl file (worldINT.bgl) in the folder /addon scenery/scenery. This was the BIG PROBLEM, the reason why I can fix FD-FMC, why I can´t added any waypoint into the flight plan and why SID and STAR doesn´t recognize some waypoints.
Now all is perfect and I can to fly that fantastic (work) planes.
Thank very much
Best regards,
Rosendo
Re: Project FMC simplified for Project Airbus
Hello,
As I promised, I prepare the final packs for all aircraft.
Before upload on AVSIM library, I prepared the A318 pack. But I want to be sure that I haven't missing something, so if someone who have never installed one of these aircraft (FD-FMC version) can test this pack to know if all is ok ?
Pack include an auto-installer (for FSX only).
Installer do :
- install aircraft
- install DLL's
- add in dll.xml file the XMLTools declaration (if it doesn't exist already) and create a backup of dll.xml before change
- copy all sounds,gauges, effects
- copy Freenav AIRAC
- copy airport database (optional now !) : if user want to not overwrite his FD-FMC airport database, now it can jump this step with new installer.
- create the FMC_path.ini file
In case of airport overwrite database, check that all the FD_FMC folder has not a subfolder "read only".
FD-FMC is final version 1.55
It include new VC by Bjoern Kesten, new HD textures by CokiBH (with 2 night set : orange and white).
Other users, please wait the AVSIM version, because my website has a limited bandwidth and this is a 200 Mo file. But if someone that have already the aircraft can download to test, it will be appreciated.
But this pack will have a new folder name, so previous aircraft will be not overwrited. You will have to delete it.
link to download A318 FD-FMC 1.55 : http://freenavdbgroup.com/Temp/PA_A318F ... M.1.55.zip
When I will get feedback about the pack, I will upload all packs (A318, A319, A320, A321 and a full pack with all aircrafts) on AVSIM library.
Thanks for feedback
Francois
As I promised, I prepare the final packs for all aircraft.
Before upload on AVSIM library, I prepared the A318 pack. But I want to be sure that I haven't missing something, so if someone who have never installed one of these aircraft (FD-FMC version) can test this pack to know if all is ok ?
Pack include an auto-installer (for FSX only).
Installer do :
- install aircraft
- install DLL's
- add in dll.xml file the XMLTools declaration (if it doesn't exist already) and create a backup of dll.xml before change
- copy all sounds,gauges, effects
- copy Freenav AIRAC
- copy airport database (optional now !) : if user want to not overwrite his FD-FMC airport database, now it can jump this step with new installer.
- create the FMC_path.ini file
In case of airport overwrite database, check that all the FD_FMC folder has not a subfolder "read only".
FD-FMC is final version 1.55
It include new VC by Bjoern Kesten, new HD textures by CokiBH (with 2 night set : orange and white).
Other users, please wait the AVSIM version, because my website has a limited bandwidth and this is a 200 Mo file. But if someone that have already the aircraft can download to test, it will be appreciated.
But this pack will have a new folder name, so previous aircraft will be not overwrited. You will have to delete it.
link to download A318 FD-FMC 1.55 : http://freenavdbgroup.com/Temp/PA_A318F ... M.1.55.zip
When I will get feedback about the pack, I will upload all packs (A318, A319, A320, A321 and a full pack with all aircrafts) on AVSIM library.
Thanks for feedback
Francois
Re: Project FMC simplified for Project Airbus
file:///C:/Users/Luis%20Calado/Pictures/Archivos%20de%20Flight%20Simulator%20X/2016-12-19_14-31-23-777.BMP
Sorry to bring the bad news but at first the Auto Installer couldn't run so I tried manually and this was the cockpit of my a318...
I really want this to work and thank btw
I also don't know how to upload pics here
Bravo99
Sorry to bring the bad news but at first the Auto Installer couldn't run so I tried manually and this was the cockpit of my a318...
I really want this to work and thank btw
I also don't know how to upload pics here
Bravo99
Re: Project FMC simplified for Project Airbus
search a pictures hosting like http://www.hostingpics.net/ to post your picture
What's happens exactly with installer ?
What's happens exactly with installer ?
Re: Project FMC simplified for Project Airbus
http://www.hostingpics.net/viewer.php?i ... 744967.png
The instaler won't execute and the gauges like PFD, ND and other cockpit instruments are not showing up.
The instaler won't execute and the gauges like PFD, ND and other cockpit instruments are not showing up.
-
- Posts: 6
- Joined: 17 Nov 2016, 15:00
Re: Project FMC simplified for Project Airbus
Does this include the new FCU as per the one in real airbus?
Re: Project FMC simplified for Project Airbus
No.
I'm also officially cancelling all further work on the model. For the last weeks, I have tried to remodel the entire sidewall to match the cockpit to the A320's windows and it's just too frustrating to go on. There are absolutely no consistent and/or detailed reference images of the area out there and the shapes are a nightmare. My time is just too precious to be wasted on this. Sorry, guys.
I'm also officially cancelling all further work on the model. For the last weeks, I have tried to remodel the entire sidewall to match the cockpit to the A320's windows and it's just too frustrating to go on. There are absolutely no consistent and/or detailed reference images of the area out there and the shapes are a nightmare. My time is just too precious to be wasted on this. Sorry, guys.
Re: Project FMC simplified for Project Airbus
Have you start engines (CTRL+E] or turn on Battery ??????bravo99 wrote:http://www.hostingpics.net/viewer.php?i ... 744967.png
The instaler won't execute and the gauges like PFD, ND and other cockpit instruments are not showing up.
Installer crash immediately (no run) ?
Which Windows Version ?
Re: Project FMC simplified for Project Airbus
Please, I need help, because all works fine on my computer.
I need some tester to check if install program works ....
I need some tester to check if install program works ....
Re: Project FMC simplified for Project Airbus
If you want I will test it.What kind of tests you want to do??
-
- Posts: 354
- Joined: 29 Jul 2014, 22:47
Re: Project FMC simplified for Project Airbus
Didn't Bjoern do that already?Bjoern wrote:No.
I'm also officially cancelling all further work on the model. For the last weeks, I have tried to remodel the entire sidewall to match the cockpit to the A320's windows and it's just too frustrating to go on. There are absolutely no consistent and/or detailed reference images of the area out there and the shapes are a nightmare. My time is just too precious to be wasted on this. Sorry, guys.
Edit: Nevermind, I thought it was Francois who wrote what I quoted from Bjoern.
Last edited by The320Pilot on 20 Dec 2016, 16:10, edited 1 time in total.
Re: Project FMC simplified for Project Airbus
just download the A318 pack and try to run the setup programCokiBH wrote:If you want I will test it.What kind of tests you want to do??
Re: Project FMC simplified for Project Airbus
Francois
I'll give it a go...See what happens..
I'll give it a go...See what happens..
Re: Project FMC simplified for Project Airbus
Hi Francois,
I gave it a try on my system and after selecting "install" I get the message : Run-time error '76' - Path not found.
Tried from my desktop but no joy either.
Rick Canham
I gave it a try on my system and after selecting "install" I get the message : Run-time error '76' - Path not found.
Tried from my desktop but no joy either.
Rick Canham
Re: Project FMC simplified for Project Airbus
Hi Francois..
I ran the programme and it seemed OK. Except, I've still got the same problem as with my previous one...The top half of the panel is 'dead.' So. I can deduce that the installer worked for me..But it didn't solve my initial problem...(which I was hoping for) Don't worry 'bout that though. Enough on your plate to be busy with.
Thanks
ZA
I ran the programme and it seemed OK. Except, I've still got the same problem as with my previous one...The top half of the panel is 'dead.' So. I can deduce that the installer worked for me..But it didn't solve my initial problem...(which I was hoping for) Don't worry 'bout that though. Enough on your plate to be busy with.
Thanks
ZA
Re: Project FMC simplified for Project Airbus
Curious ! Have you moved your FSX ?kremin wrote:Hi Francois,
I gave it a try on my system and after selecting "install" I get the message : Run-time error '76' - Path not found.
Tried from my desktop but no joy either.
Rick Canham
I forgot to say that this installer works only with Microsoft FSX. It cennot work with FSX Steam edition or P3D.
I don't understand why program works on some computer and not on others....
Thanks for test
Re: Project FMC simplified for Project Airbus
Are you sure that you have FSX SP2 ?zaflyer wrote:Hi Francois..
I ran the programme and it seemed OK. Except, I've still got the same problem as with my previous one...The top half of the panel is 'dead.' So. I can deduce that the installer worked for me..But it didn't solve my initial problem...(which I was hoping for) Don't worry 'bout that though. Enough on your plate to be busy with.
Thanks
ZA
Re: Project FMC simplified for Project Airbus
I downloaded a318 and panel FD-FMC 1.521 from Free Nav DB Group because I did not have A318 downloaded.
I installed a318 manual and then run panel uptade.No errors in installer smooth install like others programs and then just copy FltSim.xx sections
to "Aircraft.cfg update panel.1.521" and renamed this file in "aircraft.cfg".I run game and there are not black screens or something seems to work fine.
CokiBH
I installed a318 manual and then run panel uptade.No errors in installer smooth install like others programs and then just copy FltSim.xx sections
to "Aircraft.cfg update panel.1.521" and renamed this file in "aircraft.cfg".I run game and there are not black screens or something seems to work fine.
CokiBH
Re: Project FMC simplified for Project Airbus
Francois try to put browse path in installer and make default path for win7 and xp.For other users of FSX like steam let them chose their FSX main path.Its easy to do in installer.Just give Fsx main path and in installer add folders Gauge,simobjects and sound you know what I am saying if you make program.
Also if you put installer in C:/ some players might have it in D:/ or something similar maybe they renamed hard drive.I am not expert about it but try to do these things I recommend you.
CokiBH
Also if you put installer in C:/ some players might have it in D:/ or something similar maybe they renamed hard drive.I am not expert about it but try to do these things I recommend you.
CokiBH
Re: Project FMC simplified for Project Airbus
Are you sure that you have FSX SP2 ?[/quote]
Hi Francois ..Sure. Also SP 1
Thanks
ZA
Hi Francois ..Sure. Also SP 1
Thanks
ZA
Re: Project FMC simplified for Project Airbus
You are right. I can add a dialog box to choose paths; but I think that many user don't know the path of DLL.XML file. Today, I get the path by a Win Register key.CokiBH wrote:Francois try to put browse path in installer and make default path for win7 and xp.For other users of FSX like steam let them chose their FSX main path.Its easy to do in installer.Just give Fsx main path and in installer add folders Gauge,simobjects and sound you know what I am saying if you make program.
Also if you put installer in C:/ some players might have it in D:/ or something similar maybe they renamed hard drive.I am not expert about it but try to do these things I recommend you.
CokiBH
I will see tonight if I can add easily dialog box to chose and force all paths .
Thanks for feedback
Re: Project FMC simplified for Project Airbus
Hi Francois ..Sure. Also SP 1zaflyer wrote:Are you sure that you have FSX SP2 ?
Thanks
ZA[/quote]
I don't understand waht happens and you are the only one to get this issue ...... sorry but no idea.....
DX10 mode maybe ?
Re: Project FMC simplified for Project Airbus
Yes I'm using FSX2+Acceleration and running in Windows 10. FSX is installed on it's own drive but the installer does find it. I've tried running the installer from c: directory, from the desktop and from fsx directory but always the same result.fdd_fr wrote:Curious ! Have you moved your FSX ?kremin wrote:Hi Francois,
I gave it a try on my system and after selecting "install" I get the message : Run-time error '76' - Path not found.
Tried from my desktop but no joy either.
Rick Canham
I forgot to say that this installer works only with Microsoft FSX. It cennot work with FSX Steam edition or P3D.
I don't understand why program works on some computer and not on others....
Thanks for test
Re: Project FMC simplified for Project Airbus
HI Francois...
I've just done a 're initiation' of FSX to try and gt rid of bugs..Still not sorted out. As for DX10 I don't seem to get it on my settings..I'm running:
NVIDIA GeForce7600 GS and a Pentium Dual Core CPU (Can't get NVIDIA Inspector to work either...(that's another issue) W7.
So, not sure
I've just done a 're initiation' of FSX to try and gt rid of bugs..Still not sorted out. As for DX10 I don't seem to get it on my settings..I'm running:
NVIDIA GeForce7600 GS and a Pentium Dual Core CPU (Can't get NVIDIA Inspector to work either...(that's another issue) W7.
So, not sure
Re: Project FMC simplified for Project Airbus
EUREKA!!!
I uninstalled SP 2..-re-installed both SP 1 & 2 and the panel problem is solved. Some time ago, I did a system restore..not sure if that did something... Anyway..The A318 is running...But not getting SID's and STAR info on the FMC planner.
Thanks
ZA
I uninstalled SP 2..-re-installed both SP 1 & 2 and the panel problem is solved. Some time ago, I did a system restore..not sure if that did something... Anyway..The A318 is running...But not getting SID's and STAR info on the FMC planner.
Thanks
ZA
Re: Project FMC simplified for Project Airbus
Ok. Maybe Win 10 use another regester key system......kremin wrote:Yes I'm using FSX2+Acceleration and running in Windows 10. FSX is installed on it's own drive but the installer does find it. I've tried running the installer from c: directory, from the desktop and from fsx directory but always the same result.fdd_fr wrote:Curious ! Have you moved your FSX ?kremin wrote:Hi Francois,
I gave it a try on my system and after selecting "install" I get the message : Run-time error '76' - Path not found.
Tried from my desktop but no joy either.
Rick Canham
I forgot to say that this installer works only with Microsoft FSX. It cennot work with FSX Steam edition or P3D.
I don't understand why program works on some computer and not on others....
Thanks for test
I will add drive/folder dialog box to get the capability to enter application path during installation if setup doesn't find correct paths.
Re: Project FMC simplified for Project Airbus
Good news ! If no SID/STAR, check dll.xml file to know if XMLTools.dll is correctly declared.zaflyer wrote:EUREKA!!!
I uninstalled SP 2..-re-installed both SP 1 & 2 and the panel problem is solved. Some time ago, I did a system restore..not sure if that did something... Anyway..The A318 is running...But not getting SID's and STAR info on the FMC planner.
Thanks
ZA
XMLTools.dll must be placed in the main FSX directory.
If the dll is correctly declared, you must have a line "XMLTools.dll" in the [Trusted] section on FSX.cfg file.
Re: Project FMC simplified for Project Airbus
Hi Francois...
AT LAST!! It's sorted. Managed to get the FMC up and running. Now to install more textures to the A318. One last Q. What's the latest version of the A320 please? There''s one on AVSIM..Not sure if that's it.
Appreciate your help and the help[ of Wulf...
Happy Christmas and a joyous New Year.
ZA
AT LAST!! It's sorted. Managed to get the FMC up and running. Now to install more textures to the A318. One last Q. What's the latest version of the A320 please? There''s one on AVSIM..Not sure if that's it.
Appreciate your help and the help[ of Wulf...
Happy Christmas and a joyous New Year.
ZA
-
- Posts: 501
- Joined: 20 Jan 2014, 21:27
Re: Project FMC simplified for Project Airbus
Good to hear that you have sorted it out.zaflyer wrote:Hi Francois...
AT LAST!! It's sorted. Managed to get the FMC up and running. Now to install more textures to the A318. One last Q. What's the latest version of the A320 please? There''s one on AVSIM..Not sure if that's it.
Appreciate your help and the help[ of Wulf...
Happy Christmas and a joyous New Year.
ZA
A320: The latest and available aircraft and panel release V1.52.1 can be directly downloaded from the freenavdbgroup.com, but I strongly recommend to wait a couple of days. Francois is now preparing the A318, A319, A320 and A321 final installer with all the latest features and bugfixes.
Re: Project FMC simplified for Project Airbus
The picture was taken during T/O run.fdd_fr wrote:Have you start engines (CTRL+E] or turn on Battery ??????bravo99 wrote:http://www.hostingpics.net/viewer.php?i ... 744967.png
The instaler won't execute and the gauges like PFD, ND and other cockpit instruments are not showing up.
Installer crash immediately (no run) ?
Which Windows Version ?
Installer crashed immediately: Affirm
Windows version: 10