Hello PA,
I'm very proud of the A321 you made it looks amazing... As we know there is always those few bugs tought...
I've merged the A321 with the Wilco panel and found that the flaps indicator arent seposed to be where they are when let's say you select them to be at 2, they will be at 1 and when you start the t/o it gives you the warning for flaps and stuff. Also, it seems to be a little slow on the decent so you always come in too high for your approach. If there is a fix I could do in the aircraft.cfg please tell me...It would be appreciated! Thanks for making the A321!
A321 Questions
Forum rules
Community-driven support for Project Airbus aircraft only.
Community-driven support for Project Airbus aircraft only.
Community-driven support for Project Airbus aircraft only.
Community-driven support for Project Airbus aircraft only.
Community-driven support for Project Airbus aircraft only.
Community-driven support for Project Airbus aircraft only.
Please read the pinned topics and search the forum before posting to make sure your question's not already been answered.
Community-driven support for Project Airbus aircraft only.
Community-driven support for Project Airbus aircraft only.
Community-driven support for Project Airbus aircraft only.
Community-driven support for Project Airbus aircraft only.
Community-driven support for Project Airbus aircraft only.
Community-driven support for Project Airbus aircraft only.
Please read the pinned topics and search the forum before posting to make sure your question's not already been answered.
Re: A321 Questions
Not a bug with the A321—a bug with the Wilco panel, if anything. Look for a Wilco merge
Nobody in the group uses Wilco, I'm afraid; our FDE is better tailored for the PSS panel
Is that OP DES? Again, that'd be the panel's doingAlso, it seems to be a little slow on the decent
Nobody in the group uses Wilco, I'm afraid; our FDE is better tailored for the PSS panel
Re: A321 Questions
Ok then, we will have to find a merge I guess and maybe edit the FDE a bit!
Re: A321 Questions
i have the answer
go to where the flaps section of the aircraft.cfg is:
then go to where it says Flaps.0, the replace it with this one:
[Flaps.0]
type=1
span-outboard=0.85
extending-time=21.000
system_type=1
damaging-speed=233.000
blowout-speed=250.000
flaps-position.0=0.000,
flaps-position.1=0.000,
flaps-position.2=15.000,
flaps-position.3=20.000,
flaps-position.4=26.000,
flaps-position.5=35.000,
lift_scalar=0.0
drag_scalar=0.0
this will work with the wilco panel.
go to where the flaps section of the aircraft.cfg is:
then go to where it says Flaps.0, the replace it with this one:
[Flaps.0]
type=1
span-outboard=0.85
extending-time=21.000
system_type=1
damaging-speed=233.000
blowout-speed=250.000
flaps-position.0=0.000,
flaps-position.1=0.000,
flaps-position.2=15.000,
flaps-position.3=20.000,
flaps-position.4=26.000,
flaps-position.5=35.000,
lift_scalar=0.0
drag_scalar=0.0
this will work with the wilco panel.
-
- Posts: 13
- Joined: 06 May 2011, 19:16
Re: A321 Questions
There a same bug with the FSX A321 Panel.....Can I use the same fix?
Thanks!
Clement
Thanks!
Clement