Project Airbus 319 problem landing gears sunken
Forum rules
Community-driven support for Project Airbus aircraft only.
Community-driven support for Project Airbus aircraft only.
Community-driven support for Project Airbus aircraft only.
Community-driven support for Project Airbus aircraft only.
Community-driven support for Project Airbus aircraft only.
Community-driven support for Project Airbus aircraft only.
Please read the pinned topics and search the forum before posting to make sure your question's not already been answered.
Community-driven support for Project Airbus aircraft only.
Community-driven support for Project Airbus aircraft only.
Community-driven support for Project Airbus aircraft only.
Community-driven support for Project Airbus aircraft only.
Community-driven support for Project Airbus aircraft only.
Community-driven support for Project Airbus aircraft only.
Please read the pinned topics and search the forum before posting to make sure your question's not already been answered.
Project Airbus 319 problem landing gears sunken
Hi Y'All,
I have no idea how to fix the contact points. I have tried and tried still failure and crashed etc.. There is no way to fix it!!!
Can you tell me what is perfect landing gears on ground level for contact points?
See my landing gears sunken : http://img.photobucket.com/albums/v133/ ... 24-001.jpg
Please help.
Thanks,
Stuart
I have no idea how to fix the contact points. I have tried and tried still failure and crashed etc.. There is no way to fix it!!!
Can you tell me what is perfect landing gears on ground level for contact points?
See my landing gears sunken : http://img.photobucket.com/albums/v133/ ... 24-001.jpg
Please help.
Thanks,
Stuart
Re: Project Airbus 319 problem landing gears sunken
Do yours looks like these? These are mine and I don't have that problem.
[contact_points]
//0 Class <0=none,1=wheel, 2=scrape, 3=float>
//1 Longitudinal Position (feet)
//2 Lateral Position (feet)
//3 Vertical Position (feet)
//4 Impact Damage Threshold (Feet Per Minute)
//5 Brake Map (0=None, 1=Left, 2=Right)
//6 Wheel Radius (feet)
//7 Steer Angle (degrees)
//8 Static Compression (feet) (0 if rigid)
//9 Max/Static Compression Ratio
//10 Damping Ratio (0=Undamped, 1=Critically Damped)
//11 Extension Time (seconds)
//12 Retraction Time (seconds)
//13 Sound Type
//14 Airspeed limit for retraction (KIAS)
//15 Airspeed that gear gets damage at (KIAS)
static_pitch=-0.319722
static_cg_height=11.60811023622
point.0=1.0, 32.83, 0.0000,-11.72, 800,0.0,1.5,68.0,0.70,1.4390000,0.68,13.200000,12.900000,0.000000,252.000000,282.000000
point.1=1.0,-4.160,-12.458,-12.22,1200,1.0,1.9,0.00,0.72,1.5419948,0.81,14.000000,13.700000,2.000000,252.000000,282.000000
point.2=1.0,-4.160, 12.458,-12.22,1200,2.0,1.9,0.00,0.72,1.5419948,0.80,14.200000,13.300000,3.000000,252.000000,282.000000
point.3=2.0,-13.750000,-54.583333,-0.500000,750.924659,0.000000,0.000000,0.000000,0.000000,0.000000,0.000000,0.000000,0.000000,5.000000,0.000000,0.000000
point.4=2.0,-13.750000,54.583333,-0.500000,750.924659,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,6.0,0.0,0.0
point.5=2.0,-63.250000,0.0,4.050,750.924659,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,9.0,0.0,0.0
point.6=2.0,46.666667,0.0,-4.166667,750.924659,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,4.0,0.0,0.0
point.7=5.0,-3.000, 0,0000,0.0000, 1600, 0, 0.00, 50.0, 0.0, 0.0, 1.00, 0.2, 0.2, 0, 0.0, 0.0
gear_system_type=0
[contact_points]
//0 Class <0=none,1=wheel, 2=scrape, 3=float>
//1 Longitudinal Position (feet)
//2 Lateral Position (feet)
//3 Vertical Position (feet)
//4 Impact Damage Threshold (Feet Per Minute)
//5 Brake Map (0=None, 1=Left, 2=Right)
//6 Wheel Radius (feet)
//7 Steer Angle (degrees)
//8 Static Compression (feet) (0 if rigid)
//9 Max/Static Compression Ratio
//10 Damping Ratio (0=Undamped, 1=Critically Damped)
//11 Extension Time (seconds)
//12 Retraction Time (seconds)
//13 Sound Type
//14 Airspeed limit for retraction (KIAS)
//15 Airspeed that gear gets damage at (KIAS)
static_pitch=-0.319722
static_cg_height=11.60811023622
point.0=1.0, 32.83, 0.0000,-11.72, 800,0.0,1.5,68.0,0.70,1.4390000,0.68,13.200000,12.900000,0.000000,252.000000,282.000000
point.1=1.0,-4.160,-12.458,-12.22,1200,1.0,1.9,0.00,0.72,1.5419948,0.81,14.000000,13.700000,2.000000,252.000000,282.000000
point.2=1.0,-4.160, 12.458,-12.22,1200,2.0,1.9,0.00,0.72,1.5419948,0.80,14.200000,13.300000,3.000000,252.000000,282.000000
point.3=2.0,-13.750000,-54.583333,-0.500000,750.924659,0.000000,0.000000,0.000000,0.000000,0.000000,0.000000,0.000000,0.000000,5.000000,0.000000,0.000000
point.4=2.0,-13.750000,54.583333,-0.500000,750.924659,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,6.0,0.0,0.0
point.5=2.0,-63.250000,0.0,4.050,750.924659,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,9.0,0.0,0.0
point.6=2.0,46.666667,0.0,-4.166667,750.924659,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,4.0,0.0,0.0
point.7=5.0,-3.000, 0,0000,0.0000, 1600, 0, 0.00, 50.0, 0.0, 0.0, 1.00, 0.2, 0.2, 0, 0.0, 0.0
gear_system_type=0
Re: Project Airbus 319 problem landing gears sunken
Are you using the official FDE?
Re: Project Airbus 319 problem landing gears sunken
No, I am using IDFG's panel.esg wrote:Are you using the official FDE?
Thanks Devildog, for posting the aircraft.cfg.
Stuart
Re: Project Airbus 319 problem landing gears sunken
:?Big777jet wrote: No, I am using IDFG's panel.
Re: Project Airbus 319 problem landing gears sunken
Why? I hate to use default FS2004. It looks terrible! I am member of DVA (Delta Airlines). They have download fleet Airbus 319 it came with IFDG. I don't like the model plane there are no flex wings, too bright lights and crashed landing at LHR and CDG for no reason. Project Airbus has no problem landing in LHR and CDG. I created merged IFDG panel. That's why I had trouble with landing gears sunken that what I am asking for it. Now, I tested flight recently. I just landed without glitch! Thanks sooooooooo much. Big relief! Whew....esg wrote::?Big777jet wrote: No, I am using IDFG's panel.
Many Thanks you guys.
Stuart
Re: Project Airbus 319 problem landing gears sunken
Where did you get this aircraft.cfg coming from? I have no idea why such a stupid aircraft.cfg come with download in full package for Project Airbus 319. I got them from flightsim's library download. I don't know why the landing gears sunken. Where did you get this? I tried search and search and search nothing luck. I have asked flightsim, Delta VA and jetphotos in my posted for help. Nobody was answered me for nothing help. I was UPSET! Dumb people out there! I am surprised that you have the right aircraft.cfg in the first place I found this site for new Pairbus' forum. That was a quick response. It was nice of that! I can't believe this my rest of forums nothing help and no response for a few days later. They were telling me, you have to look it up google and read the tip how to fix contact points. What a bummer!DevilDog wrote:Do yours looks like these? These are mine and I don't have that problem.
[contact_points]
(too long for post I had to cut it out)
Thanks soooooooo much,
Stuart
Re: Project Airbus 319 problem landing gears sunken
iFDG hasn't ever made a panel, so whatever you're using is not iFDG's.Big777jet wrote:Why? I hate to use default FS2004. It looks terrible! I am member of DVA (Delta Airlines). They have download fleet Airbus 319 it came with IFDG. I don't like the model plane there are no flex wings, too bright lights and crashed landing at LHR and CDG for no reason. Project Airbus has no problem landing in LHR and CDG. I created merged IFDG panel. That's why I had trouble with landing gears sunken that what I am asking for it. Now, I tested flight recently. I just landed without glitch! Thanks sooooooooo much. Big relief! Whew....esg wrote::?Big777jet wrote: No, I am using IDFG's panel.
Many Thanks you guys.
Stuart
Re: Project Airbus 319 problem landing gears sunken
Any of the official releases.Big777jet wrote: Where did you get this aircraft.cfg coming from?
Re: Project Airbus 319 problem landing gears sunken
This is what I am using IFDG's panel that I am using Project Airbus.esg wrote: iFDG hasn't ever made a panel, so whatever you're using is not iFDG's.
http://img.photobucket.com/albums/v133/ ... 19-004.jpg
This is FS2004 default's panel. I don't use them.
http://img.photobucket.com/albums/v133/ ... 19-005.jpg
If it is not so please send me a link what does look like.
Thanks,
Stuart
Re: Project Airbus 319 problem landing gears sunken
That's Eric Marciano's panel.Big777jet wrote:This is what I am using IFDG's panel that I am using Project Airbus.esg wrote: iFDG hasn't ever made a panel, so whatever you're using is not iFDG's.
http://img.photobucket.com/albums/v133/ ... 19-004.jpg
Re: Project Airbus 319 problem landing gears sunken
Esg,
I am asking what is look alike panel that you have IFDG panel? Send a picture.
I did not know that why was include full package from the Delta library fleet? I thought it was a full package come with IFDG. Anyway.. Thanks for telling me.
Stuart
I am asking what is look alike panel that you have IFDG panel? Send a picture.
I did not know that why was include full package from the Delta library fleet? I thought it was a full package come with IFDG. Anyway.. Thanks for telling me.
Stuart
Re: Project Airbus 319 problem landing gears sunken
ESG,Big777jet wrote:Esg,
I am asking what is look alike panel that you have IFDG panel? Send a picture.
I did not know that why was include full package from the Delta library fleet? I thought it was a full package come with IFDG. Anyway.. Thanks for telling me.
Stuart
Be kindly remind please send me a link for your panel look like.
Re: Project Airbus 319 problem landing gears sunken
Repeatly, please send your image what is your panel is like?Big777jet wrote:ESG,Big777jet wrote:Esg,
I am asking what is look alike panel that you have IFDG panel? Send a picture.
I did not know that why was include full package from the Delta library fleet? I thought it was a full package come with IFDG. Anyway.. Thanks for telling me.
Stuart
Be kindly remind please send me a link for your panel look like.
Thanks again,
Stuart