dont sink
Forum rules
Community-driven support for Project Airbus aircraft only.
Community-driven support for Project Airbus aircraft only.
Community-driven support for Project Airbus aircraft only.
Community-driven support for Project Airbus aircraft only.
Community-driven support for Project Airbus aircraft only.
Community-driven support for Project Airbus aircraft only.
Please read the pinned topics and search the forum before posting to make sure your question's not already been answered.
Community-driven support for Project Airbus aircraft only.
Community-driven support for Project Airbus aircraft only.
Community-driven support for Project Airbus aircraft only.
Community-driven support for Project Airbus aircraft only.
Community-driven support for Project Airbus aircraft only.
Community-driven support for Project Airbus aircraft only.
Please read the pinned topics and search the forum before posting to make sure your question's not already been answered.
-
- Posts: 13
- Joined: 17 Jan 2010, 21:37
dont sink
hey guys, im new to the project airbus planes here and they seem like a pretty good model, good on the frames also which is important to me. One question i had regarding the A320-200 is that when ever I am landing I get the "Dont Sink" warning sound that goes off, even when i am coming in at around 160kts, is there a way to fix this?
FSX SP2
FSX SP2
-
- Posts: 55
- Joined: 08 Dec 2009, 05:21
Re: dont sink
Make sure your flaps are fully down and you hold a correct pitch-up degree (eg 3 degrees). If your approach speed is about 160kts, you'd be coming in too fast unless you had your flaps up. Press F7 to lower flaps.American398 wrote:hey guys, im new to the project airbus planes here and they seem like a pretty good model, good on the frames also which is important to me. One question i had regarding the A320-200 is that when ever I am landing I get the "Dont Sink" warning sound that goes off, even when i am coming in at around 160kts, is there a way to fix this?
FSX SP2
-
- Posts: 13
- Joined: 17 Jan 2010, 21:37
Re: dont sink
ya flaps are fully down and i cant seem to come in to much slower because than the nose is too high.
-
- Posts: 13
- Joined: 17 Jan 2010, 21:37
Re: dont sink
just the fault FSX A321 panel, but i took that sound out of the FSX sound folder because, i really didn't know what to do, i would just lower the nose ever so slightly and it would repeat over and over.
Re: dont sink
I have the same problem but would like something like "check landing configuration" instead of that annoying. I just think instead of sink
Last edited by sknepper on 01 Apr 2010, 15:23, edited 1 time in total.
Re: dont sink
Hi guys..
let me thanks about PA for this excellent modeling so amazing well don guys , i used FSX A321 default panel and I have this problem in landings Also do everything check landing configuration and etc... How can i solve this error ?
sorry about my English.
Kind regards.
let me thanks about PA for this excellent modeling so amazing well don guys , i used FSX A321 default panel and I have this problem in landings Also do everything check landing configuration and etc... How can i solve this error ?
sorry about my English.
Kind regards.
-
- Posts: 255
- Joined: 09 Jul 2009, 14:11
Re: dont sink
Hi Majid,
for all the FSX users here to help you with your problem, you need to explain what your problem is exactly with the landing. Can you describe it as best you can? even if its broken english it's ok.. try
for all the FSX users here to help you with your problem, you need to explain what your problem is exactly with the landing. Can you describe it as best you can? even if its broken english it's ok.. try
Re: dont sink
Hi tranceaddict
I hear don't sink warning during approach (specially final approaches) and I know every thing is OK ,flaps are fully down and air speed is true for landing.
I hear don't sink warning during approach (specially final approaches) and I know every thing is OK ,flaps are fully down and air speed is true for landing.
-
- Posts: 255
- Joined: 09 Jul 2009, 14:11
Re: dont sink
even if your flaps are down and you are at the correct airspeed, are you below the glideslope?
Re: dont sink
dear Tranceaddict
I'm sure every thing is OK flaps and airspeed are set, glideslope is captured correctly.
I'm sure every thing is OK flaps and airspeed are set, glideslope is captured correctly.
Re: dont sink
Well if everything is ok, there is only one thing that will solve your problem....As soon as you hear that, press Q on your keyboard. It will solve your problem, sure of it
-
- Posts: 6
- Joined: 02 Apr 2010, 14:47
Re: dont sink
I love the answer though... good point
Re: dont sink
Find another panel for the Airbus you are using..
Sometimes FS is stupid!!
Sometimes FS is stupid!!
Re: dont sink
hey Guys,
Same problem for me,
I'm using Merge Wilco Panel ( only) + PA on FSX sp2
Full flap on the ILS at Vreff+5 kts, "don't sink" from 1000ft to 100ft. i land normaly my aircraft and i don't hear altitude call out.
thks
Marc
Same problem for me,
I'm using Merge Wilco Panel ( only) + PA on FSX sp2
Full flap on the ILS at Vreff+5 kts, "don't sink" from 1000ft to 100ft. i land normaly my aircraft and i don't hear altitude call out.
thks
Marc