Forum rules
Community-driven support for Project Airbus aircraft only.
Community-driven support for Project Airbus aircraft only.
Community-driven support for Project Airbus aircraft only.
Community-driven support for Project Airbus aircraft only.
Community-driven support for Project Airbus aircraft only.
Community-driven support for Project Airbus aircraft only.
Please read the pinned topics and search the forum before posting to make sure your question's not already been answered.
-
cgentil
- Posts: 9
- Joined: 24 Nov 2012, 10:02
Post
by cgentil » 01 Dec 2012, 00:39
Hello,
In models of FSX, I ask, why the rudder don't turn to the right, after the airplane was shut down, same the following image?

-
Matt Tank
- Posts: 83
- Joined: 07 Apr 2010, 12:42
Post
by Matt Tank » 01 Dec 2012, 01:03
Your Landing gear and H-Stabilisers are missing too, perhaps more than a model problem?
Regards
Matt
-
cgentil
- Posts: 9
- Joined: 24 Nov 2012, 10:02
Post
by cgentil » 01 Dec 2012, 09:23
I can turn the rudder, but in the FS9 models, the rudder turn to the right side, after the plane was shut down, in FSX this not happen?
-
cgentil
- Posts: 9
- Joined: 24 Nov 2012, 10:02
Post
by cgentil » 01 Dec 2012, 13:27
At A321 FSX model, the rudder, turns to the right side, after plane off, but at A319 and A320 no.
-
GaryG
- Posts: 880
- Joined: 19 Jul 2009, 10:32
Post
by GaryG » 01 Dec 2012, 14:02
Rudder turns according to wind direction
-
cgentil
- Posts: 9
- Joined: 24 Nov 2012, 10:02
Post
by cgentil » 01 Dec 2012, 14:13
GaryG wrote:Rudder turns according to wind direction
But i'm talking when the plane is with engines off on the gate... Im' talking about control surfaces when the plane is with engines off. In the A321 when the engines are off the rudder turns automatically, in the A319 and A320 don't turn, i'm talking of FSX models.
-
GaryG
- Posts: 880
- Joined: 19 Jul 2009, 10:32
Post
by GaryG » 01 Dec 2012, 14:20
321 had the code, 319 and 320 didn't, simple. Also, yes of course that when the engines are off. Do you want it to flap how it wants when airborne?
-
cgentil
- Posts: 9
- Joined: 24 Nov 2012, 10:02
Post
by cgentil » 01 Dec 2012, 14:22
GaryG wrote:321 had the code, 319 and 320 didn't, simple. Also, yes of course that when the engines are off. Do you want it to flap how it wants when airborne?
Ok... Do you know when the PA do an update for FSX models?

-
GaryG
- Posts: 880
- Joined: 19 Jul 2009, 10:32
Post
by GaryG » 01 Dec 2012, 17:02
Nope, sorry.