Hello PA-Team,
I'm using FSX and your A320 v2.1 and it works really well. On standard Airports you can move the Gates and on the A320 I can't. Seems they're missing the contact point?
How can I add them?
FSX A320 v2.1 Gate Position
Forum rules
Community-driven support for Project Airbus aircraft only.
Community-driven support for Project Airbus aircraft only.
Community-driven support for Project Airbus aircraft only.
Community-driven support for Project Airbus aircraft only.
Community-driven support for Project Airbus aircraft only.
Community-driven support for Project Airbus aircraft only.
Please read the pinned topics and search the forum before posting to make sure your question's not already been answered.
Community-driven support for Project Airbus aircraft only.
Community-driven support for Project Airbus aircraft only.
Community-driven support for Project Airbus aircraft only.
Community-driven support for Project Airbus aircraft only.
Community-driven support for Project Airbus aircraft only.
Community-driven support for Project Airbus aircraft only.
Please read the pinned topics and search the forum before posting to make sure your question's not already been answered.
Re: FSX A320 v2.1 Gate Position
Are you using AES or no? I can't really remember docking an a320 with AES but it should work.
Re: FSX A320 v2.1 Gate Position
Yes, with AES it works. But I mean the default airports. You can move the Gates with Ctrl+J and it works with every aircraft except the A320 series from PA.
-
- Posts: 185
- Joined: 31 Aug 2012, 20:11
Re: FSX A320 v2.1 Gate Position
I think some A320s don't have the required CFG contacts. Try finding the Stefan Liebe version of the A320 (Skyteam), as I think it has the contacts, and just copy that over to your normal A320 CFG. If you want, I post mine, since i have taken the time out to make some organizational tweaks of my own
Re: FSX A320 v2.1 Gate Position
Yes, why not. I would be very thankful if you could post them.
-
- Posts: 185
- Joined: 31 Aug 2012, 20:11
Re: FSX A320 v2.1 Gate Position
Here you go! I would recommend backing up your aircraft.cfg, just in case something goes wrong.
Code: Select all
[contact_points]
//AES Orgvalue:static_pitch=-0.319722
static_pitch=-.319722
//AES Orgvalue:static_cg_height=11.60811023622
static_cg_height=11.60811023622
point.0=1.0, 38.84,0.0,-11.9619,800,0.0,1.53379,68.0,1.0,1.4390,0.680000, 13.2,12.9,0.000000,252.000000,282.0
point.1=1.0,-3.660,-12.458,-12.22,1200,1.000000,1.680382,0.000000,0.72,1.5419948,0.81,14.000000,13.700000,2.000000,252.000000,282.000000
point.2=1.0,-3.660,12.458,-12.22,1200,2.000000,1.680382,0.000000,0.72,1.5419948,0.80,14.200000,13.300000,2.000000,252.000000,282.000000
point.3=2.0,-13.750000,-54.583333,-0.500000,750.924659,0.000000,0.000000,0.000000,0.000000,0.000000,0.000000,0.000000,0.000000,5.000000,0.000000,0.000000
point.4=2.0,-13.750000,54.583333,-0.500000,750.924659,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,6.0,0.0,0.0
point.5=2.0,-71.250000,0.0,0.750,750.924659,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,9.0,0.0,0.0
point.6=2.0,51.666667,0.0,-8.166667,750.924659,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,4.0,0.0,0.0
gear_system_type=0