I am a new user of the PA A320 and A319.
Fantastic aircraft!
Congratulations to the developpers.
In FSX the original PA strobes and beacons are too fast.
One way to solution this is to replace the FX file in the lights-section of the
aircraft.cfg with the corresponding file of the default A321.
For the A319 you can not replace the wing strobes, as they are hard-coded
because of the flexing wings.
This should also work for the A318 which I have not yet flown.
I also changed the parameters of the VC-lighting to make it work (by shift-L)
For the A320:
[LIGHTS]
light.0=3, -13.90, -55.25, 2.45, fx_navred320pa
light.1=3, -13.90, 55.25, 2.45, fx_navgre320pa
light.2=3, -69.70, 0.00, 4.70, fx_navwhi320pa ,
//light.3=2, -69.70, 0.00, 4.70, fx_strobe2320pa ,
light.3=2, -69.70, 0.00, 4.70, fx_strobeh ,
//light.4=2, -13.95, -55.25, 2.45, fx_strobe320pa
light.4=2, -13.95, -55.25, 2.45, fx_strobeh
//light.5=2, -13.95, 55.25, 2.45, fx_strobe320pa
light.5=2, -13.95, 55.25, 2.45, fx_strobeh
//light.6=1, 6.8, 0.00, -5.80, fx_beacon320pa ,
light.6=1, 6.8, 0.00, -5.80, fx_beaconb ,
//light.7=1, 3.83, 0.00, 8.47, fx_beacon320pa ,
light.7=1, 3.83, 0.00, 8.47, fx_beaconh ,
//light.8=4, 45.827, 0.00, 5.01, fx_vclight ,
light.8=4, 47.827, 0.00, 5.01, fx_vclighth ,
light.9=5, 11.570000, -10.48, -5.81, fx_PAland ,
light.10=5, 11.570000, 10.48, -5.81, fx_PAland ,
For the A319:
[LIGHTS]
light.0=3, -62.00, 0.00, 4.70, fx_navwhi320pa ,
//light.1=2, -62.10, 0.00, 4.70, fx_strobe2320pa ,
light.1=2, -62.10, 0.00, 4.70, fx_strobeh ,
//light.2=1, 6.8, 0.00, -5.80, fx_beacon320pa ,
light.2=1, 6.8, 0.00, -5.80, fx_beaconb ,
//light.3=1, 3.83, 0.00, 8.47, fx_beacon320pa ,
light.3=1, 3.83, 0.00, 8.47, fx_beaconh ,
//light.4=4, 41.827, 0.00, 5.01, fx_vclight ,
light.4=4, 47.827, 0.00, 5.01, fx_vclighth ,
light.5=5, 12.570000, -10.48, -5.81, fx_PAland ,
light.6=5, 12.570000, 10.48, -5.81, fx_PAland ,
Guy
A32x in FSX: Improvement for strobes/beacons and VC lighting
Forum rules
Community-driven support for Project Airbus aircraft only.
Community-driven support for Project Airbus aircraft only.
Community-driven support for Project Airbus aircraft only.
Community-driven support for Project Airbus aircraft only.
Community-driven support for Project Airbus aircraft only.
Community-driven support for Project Airbus aircraft only.
Please read the pinned topics and search the forum before posting to make sure your question's not already been answered.
Community-driven support for Project Airbus aircraft only.
Community-driven support for Project Airbus aircraft only.
Community-driven support for Project Airbus aircraft only.
Community-driven support for Project Airbus aircraft only.
Community-driven support for Project Airbus aircraft only.
Community-driven support for Project Airbus aircraft only.
Please read the pinned topics and search the forum before posting to make sure your question's not already been answered.
Re: A32x in FSX: Improvement for strobes/beacons and VC ligh
I forgot to say that I increased also the pitch-stability.
There were light pitch oscillations during cruise.
In the aircraft.cfg :
[flight_tuning]
elevator_effectiveness=1.0
//pitch_stability=1.2
pitch_stability=2.5
..
Guy
There were light pitch oscillations during cruise.
In the aircraft.cfg :
[flight_tuning]
elevator_effectiveness=1.0
//pitch_stability=1.2
pitch_stability=2.5
..
Guy
Re: A32x in FSX: Improvement for strobes/beacons and VC ligh
guy wrote:I forgot to say that I increased also the pitch-stability.
There were light pitch oscillations during cruise.
In the aircraft.cfg :
[flight_tuning]
elevator_effectiveness=1.0
//pitch_stability=1.2
pitch_stability=2.5
..
Guy
These figures should have been fine to begin with. :?
Could it be your joystick that's causing the issue instead?
Re: A32x in FSX: Improvement for strobes/beacons and VC lighting
i COULDN'T GET THIS TO WORK, DID i DO SOMETHING WRONG?