Page 1 of 1

Cabin???

Posted: 01 Nov 2010, 08:22
by AirNewZealand_A320
1 hours worth of boredom.

Image
Image
Image

Not bad i dont think. But not great either.

Re: Cabin???

Posted: 01 Nov 2010, 09:15
by GaryG
I would say, that's a good start mate

Re: Cabin???

Posted: 01 Nov 2010, 10:59
by Alexis
A good start indeed. But I'd recommend getting the a/c's facility planning manual, and finding the precise section and measurements there. Some pointers for the future: you need to improve the smoothing on the seats and make sure the window cuts are clean.

Re: Cabin???

Posted: 01 Nov 2010, 21:06
by Inbreker
Nice, but which aircraft is that?

Re: Cabin???

Posted: 01 Nov 2010, 22:39
by Morhaf
Inbreker wrote:Nice, but which aircraft is that?
well thats pretty obvious.. an Air New Zealand A320 of course!

Re: Cabin???

Posted: 02 Nov 2010, 00:17
by FLYPHOENIX
try making one panel of the cabin at a time the crtl c and crtl v ing- like make one detailed cabing panel + ovrhead locker, and add the chair and the isle.
then copy and add one, by one, and then you will have a complete cabin!

Re: Cabin???

Posted: 02 Nov 2010, 08:36
by AirNewZealand_A320
How much closer to go before i can apply for a modelling contract as an assisstant with PA :P

Decided i am going to make a go of this.

SEATS v2.0
Image
Image

Re: Cabin???

Posted: 02 Nov 2010, 09:13
by AirNewZealand_A320
Image
Image

Re: Cabin???

Posted: 02 Nov 2010, 10:48
by Inbreker
It's getting better and better... Keep it up.

Re: Cabin???

Posted: 02 Nov 2010, 11:32
by Alexis
Something about the seats. Don't try to model these as a single part. Divide each seat in parts (back, bottom, base, armrests, traytable e.t.c.), then join them together and clone.

Re: Cabin???

Posted: 03 Nov 2010, 07:37
by AirNewZealand_A320
Alexis wrote:Something about the seats. Don't try to model these as a single part. Divide each seat in parts (back, bottom, base, armrests, traytable e.t.c.), then join them together and clone.
Took your advice and they look heaps better.

Image
Image
Image
Image

What you think?

Re: Cabin???

Posted: 03 Nov 2010, 07:56
by AirNewZealand_A320
If one of the wiser members here could assist me in terms of knowledge of texturing these sorts of things it would help tremendously.

Re: Cabin???

Posted: 03 Nov 2010, 08:02
by GaryG
Nice job man :D

Re: Cabin???

Posted: 03 Nov 2010, 09:11
by AirNewZealand_A320
My idea of textures
Image

Re: Cabin???

Posted: 03 Nov 2010, 17:03
by elwoodjetblues569
Rather interesting work so far ANZ_A320!
Here's another resource for you.

Jetblue A320 interior / exterior virtual tour page with walkthrough views (interactive page pops-up).
http://www.jetblue.com/about/whyyoullli ... ttour.html

Not related to Airbus but just for fun. :)
Here's the Jetblue Embraer 190 interior / exterior virtual tour (interactive page pops-up).
http://www.jetblue.com/about/whyyoullli ... ttour.html

Re: Cabin???

Posted: 03 Nov 2010, 17:33
by Morhaf
looks much better indeed, but you can lose a LOT of polygons on,, basicly everything. like the seat, you'll only need polygons for the edge to be smooth, since your seat is flat, normall they're not, but it saved polygons. same with the armrest.

and the tv screen on the back is not flat.. or is a cushion?

and good idea modeling the seatbelts, but I would rather put a seatbelt on the texture, and model the bottle and the metal thing instead, saves polygons, but if you model the whole belt, you´re gonna need way more poly´s to get it smooth

and is the cushion on the front not a little too small and round? take a look at some example pictures:

http://jetphotos.net/viewphoto.php?id=5788011&nseq=44
http://jetphotos.net/viewphoto.php?id=5918686&nseq=38
http://jetphotos.net/viewphoto.php?id=6338621&nseq=13

Re: Cabin???

Posted: 11 Dec 2010, 19:23
by james767
Cool It look good

Re: Cabin???

Posted: 12 Dec 2010, 11:10
by Ghostmaster
Very nice model! :P I wish i'm good as you are. :D