-
sknepper
- Posts: 370
- Joined: 28 Nov 2009, 19:46
Post
by sknepper » 08 Jul 2011, 21:55
Alexis wrote:
There's almost no difference between them, except for the 318 and the aircraft data displayed. Once it's done, it would be easy to implement. We'll see though.
It is a great project and I'm getting very impressed. After your great works Alexis, the sky's the limit!

-
sknepper
- Posts: 370
- Joined: 28 Nov 2009, 19:46
Post
by sknepper » 30 Jul 2011, 21:29
Adriano1243 wrote:Any picts or news?
Let's wait for some news.
"Watch this space!"

-
Alexis
- Posts: 444
- Joined: 02 Jul 2009, 02:03
Post
by Alexis » 05 Aug 2011, 08:48
Adriano1243 wrote:Any picts or news?
None so far. I'm being discharged from army service on Aug. 16th, so any work will be done afterwards.
-
Adriano1243
- Posts: 12
- Joined: 06 May 2011, 19:59
Post
by Adriano1243 » 06 Aug 2011, 14:39
No problem ! Do it in your own time and make sure it will be the best!
-
emshomar
- Posts: 35
- Joined: 29 Jul 2011, 07:31
Post
by emshomar » 11 Sep 2011, 17:59
Its took now a lot of time since the last post of the A321 VC. So I am wondering if the project is still in work ?
-
A320ER
- Posts: 89
- Joined: 30 May 2011, 03:42
Post
by A320ER » 11 Sep 2011, 19:14
They'll post more previews when they are ready to.
-
Alexis
- Posts: 444
- Joined: 02 Jul 2009, 02:03
Post
by Alexis » 11 Sep 2011, 22:27
My time's very limited lately, so there's not much to show. It will be completed, though I promise you that. After all, I want an A320 cockpit for myself too!
-
emshomar
- Posts: 35
- Joined: 29 Jul 2011, 07:31
Post
by emshomar » 12 Sep 2011, 13:45
Hmm... thanks for reply ! So the project is still going on but a bit slow. Thank you !
Alexis wrote:My time's very limited lately, so there's not much to show. It will be completed, though I promise you that. After all, I want an A320 cockpit for myself too!
-
Atomic_13
- Posts: 131
- Joined: 16 Jul 2009, 11:20
Post
by Atomic_13 » 24 Sep 2011, 06:01
This is a great addition to the already awesome model

All the best in the development!
-
AF1809
- Posts: 29
- Joined: 07 Nov 2010, 09:53
Post
by AF1809 » 22 Oct 2011, 13:31
Hello,
I'm using the 321 now, and I was thinking about a thingfor the VC :
Will you do as the 380? I mean : Vas gauges VC and PA gauges VC?
Thanks
-
Alexis
- Posts: 444
- Joined: 02 Jul 2009, 02:03
Post
by Alexis » 23 Oct 2011, 00:16
I don't think we'll make any gauges ourselves, as there are already several good panels out there. We'll surely provide one setup for a good panel.
BTW, as a reminder, the 321VC is frozen for now, it isn't cancelled though.
-
AF1809
- Posts: 29
- Joined: 07 Nov 2010, 09:53
Post
by AF1809 » 23 Oct 2011, 16:50
Ok,
No problem.
-
GoldLeader
- Posts: 50
- Joined: 18 Oct 2011, 20:32
Post
by GoldLeader » 24 Nov 2011, 16:44
I really hope to see this completed. Thank you guys for everything!
-
esg
- Posts: 1583
- Joined: 01 Jul 2009, 22:03
Post
by esg » 24 Nov 2011, 16:53
This is in hold while we work on something else
-
sknepper
- Posts: 370
- Joined: 28 Nov 2009, 19:46
Post
by sknepper » 24 Nov 2011, 18:13
All good things come to those who wait

-
GoldLeader
- Posts: 50
- Joined: 18 Oct 2011, 20:32
Post
by GoldLeader » 24 Nov 2011, 19:27
sknepper wrote:All good things come to those who wait

So true.
I'm patient, I'll wait as long as it is needed

-
esg
- Posts: 1583
- Joined: 01 Jul 2009, 22:03
Post
by esg » 24 Nov 2011, 19:33
Well, youve got that 'something else' to wait for
-
eddm
- Posts: 40
- Joined: 09 Aug 2011, 23:18
Post
by eddm » 27 Nov 2011, 22:14
esg wrote:Well, youve got that 'something else' to wait for
...and this "something else" is not known, a surprise maybe? :?:
-
nickac1092
- Posts: 42
- Joined: 22 Aug 2011, 04:55
Post
by nickac1092 » 29 Nov 2011, 04:07
Will there be a Airbus A319 and A320 VC? I would love to fly them from VC since i dont like Overlands A319 and A320.
-
GaryG
- Posts: 880
- Joined: 19 Jul 2009, 10:32
Post
by GaryG » 29 Nov 2011, 08:33
They share the same layout...
-
GoldLeader
- Posts: 50
- Joined: 18 Oct 2011, 20:32
Post
by GoldLeader » 29 Nov 2011, 10:31
All aircraft from A320 family share the same cockpit.
-
1021744
- Posts: 15
- Joined: 31 Dec 2009, 21:38
Post
by 1021744 » 13 Dec 2011, 12:08
I see that the A321 will have overhead TV's, since many companys thease days have them in each seat is it possible to make it an other version?
-
Lufthansa 380
- Posts: 26
- Joined: 18 Aug 2011, 19:20
Post
by Lufthansa 380 » 13 Dec 2011, 12:29
Well, actually yes, you can paint a screen on the seat texture

But you won't have a full working TV in the seat LOL
-
Alexis
- Posts: 444
- Joined: 02 Jul 2009, 02:03
Post
by Alexis » 13 Dec 2011, 12:58
It would be too CPU intensive. You can have a few of these hanging overhead, though.
-
sinsnowman
- Posts: 61
- Joined: 29 Mar 2010, 15:54
Post
by sinsnowman » 08 Jan 2012, 11:39
I doubt if PA can release a few versions once the cockpit is out, e.g. VC+Wing View, VC+Cabin etc. I think it would do better to the framerate of the plane
-
Alexis
- Posts: 444
- Joined: 02 Jul 2009, 02:03
Post
by Alexis » 08 Jan 2012, 12:52
I don't think the framerates are that bad. I did run a test with the whole A319 interior (~105k polygons) and got low framerates, but there were things that weren't optimised, thus giving very low FPS. But a VC+Cabin+WV with around 60k should run just fine.
-
sinsnowman
- Posts: 61
- Joined: 29 Mar 2010, 15:54
Post
by sinsnowman » 09 Jan 2012, 10:43
Thanks a lot, I asked because I have huge fps drop when merged with wilco's VC gauge, I know it's not your problem but to produce serveral models should solve this problem for my future A320 VC merge. Looking forward to your excellent VC

-
Brett-Hill
- Posts: 185
- Joined: 26 Sep 2009, 23:01
Post
by Brett-Hill » 13 Jan 2012, 13:57
the framerates of using the FS9 model in FSX is is fairly bad. However you only state fs9 compatable so far so Will just have to wait...
-
Alexis
- Posts: 444
- Joined: 02 Jul 2009, 02:03
Post
by Alexis » 13 Jan 2012, 14:40
What Brett said is true. If you're using a high poly FS9 model in FSX, FPS go south.
-
GE90115B1
- Posts: 8
- Joined: 21 Jun 2011, 19:03
Post
by GE90115B1 » 10 Feb 2012, 21:17
I do understand that this work is done in your free time, but are there any updates to share?
-
esg
- Posts: 1583
- Joined: 01 Jul 2009, 22:03
Post
by esg » 10 Feb 2012, 21:28
Weve said that this has been put on hold while we work on other things.
-
GRPilot
- Posts: 6
- Joined: 19 Nov 2011, 13:48
Post
by GRPilot » 11 Feb 2012, 09:51
When is this going to be released???? I can't wait!!!!

-
GE90115B1
- Posts: 8
- Joined: 21 Jun 2011, 19:03
Post
by GE90115B1 » 11 Feb 2012, 15:21
If the project is on hold, than it will be continued and/or finished when Pairbus deems the time right. As for now, no one knows the time for completion, not even the producers.
-
szpirogyra
Post
by szpirogyra » 14 Feb 2012, 13:06
for fsx 2 right???
-
CRJ
- Posts: 6
- Joined: 01 Jun 2012, 19:08
Post
by CRJ » 01 Jun 2012, 19:10
Is this project still "alive" ?
Would be really great to have a VC for your beautiful A321.
-
esg
- Posts: 1583
- Joined: 01 Jul 2009, 22:03
Post
by esg » 01 Jun 2012, 19:49
The A330 takes priority.
-
CRJ
- Posts: 6
- Joined: 01 Jun 2012, 19:08
Post
by CRJ » 02 Jun 2012, 09:52
Oh, now that's ok

-
fdd_fr
- Posts: 1724
- Joined: 03 Jan 2012, 16:02
Post
by fdd_fr » 15 Jun 2012, 09:04
Hello Alexis ,
Great work !
I dream of a new VC for the A318/19/20/21 series for long time. I have made a improved set a gauges for the PA A3xx series, but with the default fsx A321 VC. I am ready to get back to work to adapt and improve these gauges for your new VC.
If you search someone for that, feel free to contact me !
Great !
Francois
-
korolevspace
- Posts: 9
- Joined: 02 Jun 2012, 04:39
Post
by korolevspace » 23 Jun 2012, 02:16
Is this going to be for FS2004 only?? I do have both FSX and FS2004, but it would certainly work and perform better at FSX...
-
szpirogyra
Post
by szpirogyra » 16 Jul 2012, 15:24
Prjct going on still or onto any other VC or 330/40
-
A320ER
- Posts: 89
- Joined: 30 May 2011, 03:42
Post
by A320ER » 16 Jul 2012, 16:14
szpirogyra wrote:Prjct going on still or onto any other VC or 330/40
It's on hold for right now.