A380 Virtual Cockpit released!
Re: A380 Virtual Cockpit released!
Where are the mdl? I downloaded and can't find any MDL. There is no model. :?:
Stuart
Stuart
-
- Posts: 55
- Joined: 08 Dec 2009, 05:21
Re: A380 Virtual Cockpit released!
Wow, I did not expect that when I came on today! THANKS PA!
Re: A380 Virtual Cockpit released!
I tested it out have to tell some questions:
Are you planning to make Updates ?
Are you still on work for the A321VC or do you have time ?
Is it possible to get the Brake Pressure and the Backup ADI Gauge ?
Because:
- The engine Starters are not working
- When I try to Plan the Fuel in the MCDU of vasFMC , VasFMC just crash. I can only start without planning the Fuel.
- Sometimes the Textures don't load and just shows something black. I don't know if theres a problem with my FS9.
- From the Default Eyepoint view I can't Press AP1 because the heading knob is on way.
BUT:
Your A380 is now the best for FS9 ! And for free !
Great Work
Are you planning to make Updates ?
Are you still on work for the A321VC or do you have time ?
Is it possible to get the Brake Pressure and the Backup ADI Gauge ?
Because:
- The engine Starters are not working
- When I try to Plan the Fuel in the MCDU of vasFMC , VasFMC just crash. I can only start without planning the Fuel.
- Sometimes the Textures don't load and just shows something black. I don't know if theres a problem with my FS9.
- From the Default Eyepoint view I can't Press AP1 because the heading knob is on way.
BUT:
Your A380 is now the best for FS9 ! And for free !
Great Work
Re: A380 Virtual Cockpit released!
I am not of the team but i can help you !akabam wrote:My a380 wont show up now and im getting frustrated
You need to install a livery !
Thats all !
Re: A380 Virtual Cockpit released!
Thanks guys!! Finally we can have a great A380 + VC. Thanks for all the hardwork and patience to put this up for all of us
Re: A380 Virtual Cockpit released!
I´ve got a big problem i´ve tried to update the Airac 1108 of VASFmc for 3 times and reinstall the model of PAirbus for 5 times but when I start a flight FS says there´s no navdata and then I can´t set a route in the FMC, what can I do?
Re: A380 Virtual Cockpit released!
I tried A380VC with FSX... I got good FPS ( 39FPS ) but the autopilot area is screwed up
Re: A380 Virtual Cockpit released!
ADI is there. The BPI would've been merely decorative since we've not simulated the hydraulicsemshomar wrote:Is it possible to get the Brake Pressure and the Backup ADI Gauge ?
That's an issue with VASemshomar wrote:When I try to Plan the Fuel in the MCDU of vasFMC , VasFMC just crash. I can only start without planning the Fuel.
http://www.flight1software.com/files/F1View.zipemshomar wrote:From the Default Eyepoint view I can't Press AP1 because the heading knob is on way.
That's an issue with VASPicias93 wrote:I´ve got a big problem i´ve tried to update the Airac 1108 of VASFmc for 3 times and reinstall the model of PAirbus for 5 times but when I start a flight FS says there´s no navdata and then I can´t set a route in the FMC, what can I do?
If you've any more questions post in the Support forum
Re: A380 Virtual Cockpit released!
It should be installed in the vasfmc folder in the FS9 root like this :Picias93 wrote:I´ve got a big problem i´ve tried to update the Airac 1108 of VASFmc for 3 times and reinstall the model of PAirbus for 5 times but when I start a flight FS says there´s no navdata and then I can´t set a route in the FMC, what can I do?
C:\Programm Files (x86)\Microsoft Games\Flight Simulator 9\vasfmc
--------//-------------
And thanks for reply !
Re: A380 Virtual Cockpit released!
Great!
Any 2D plan?
It would be simple and will make it universal!
Any 2D plan?
It would be simple and will make it universal!
Re: A380 Virtual Cockpit released!
Nice work on this first good looking and working VC of the A380. Where would we be without your dedication PA? Thanks to PA for setting the benchmarks.
And the gauges are fantastic, giving the look and feel of the real thing. Thanks for this wonderful addition to a great external model. Payware, eat this freeware .
And the gauges are fantastic, giving the look and feel of the real thing. Thanks for this wonderful addition to a great external model. Payware, eat this freeware .
Last edited by sknepper on 14 Aug 2011, 16:21, edited 1 time in total.
-
- Posts: 2
- Joined: 07 Jul 2011, 21:31
Re: A380 Virtual Cockpit released!
Thank you very much ........... can someone describe the entire installation;
What action by the Authority to be installed; is somewhat confused, and I have not managed to yet installed ... What am I doing wrong;; Thank
What action by the Authority to be installed; is somewhat confused, and I have not managed to yet installed ... What am I doing wrong;; Thank
-
- Posts: 4
- Joined: 29 May 2010, 00:22
Re: A380 Virtual Cockpit released!
Not FSX native yet? sigh....but no rush....take your time and make it perfect.
-
- Posts: 346
- Joined: 16 Jul 2009, 22:36
Re: A380 Virtual Cockpit released!
I haven't checked the boards lately and before I saw a whole slew of them on avsim. I was beginning to wonder if it was initially a crash or something thus resulting in all the files being reuploaded only to realize it was actually the VC model. Needless to say I am very pleasantly surprised.
I shall be getting some good mileage out of it with the Korean Air and the Lufthansa. Thanks, PA!
I shall be getting some good mileage out of it with the Korean Air and the Lufthansa. Thanks, PA!
Re: A380 Virtual Cockpit released!
Hello!
When will it be released??
JUST KINDING :lol: :lol:
Thank you for all work deployed in this project
When will it be released??
JUST KINDING :lol: :lol:
Thank you for all work deployed in this project
Re: A380 Virtual Cockpit released!
BTW, what are your specs, just thinking can i run 20-40 FPS with FSX and HD 4250 graphics card.Srilanka wrote:I tried A380VC with FSX... I got good FPS ( 39FPS ) but the autopilot area is screwed up
-
- Posts: 1
- Joined: 15 Aug 2011, 16:45
Re: A380 Virtual Cockpit released!
Hi everybody, I'm new here, and I have a small problem, which I hope you can help me solve.
I downloaded the basic A380 pack with the VC, and downloaded at least six liveries. Can somebody please
help me out with telling me how to make it work on my FSX?
Thanks!
I downloaded the basic A380 pack with the VC, and downloaded at least six liveries. Can somebody please
help me out with telling me how to make it work on my FSX?
Thanks!
Re: A380 Virtual Cockpit released!
GTX 580 3GB...with many sceneries installed....easyjet12 wrote:BTW, what are your specs, just thinking can i run 20-40 FPS with FSX and HD 4250 graphics card.Srilanka wrote:I tried A380VC with FSX... I got good FPS ( 39FPS ) but the autopilot area is screwed up
Re: A380 Virtual Cockpit released!
People, don't ask for FSX instructions here, the model is FS9 native. If someone has it installed in FSX properly, send him a PM or start a new topic in the General forum.speedbirdairbus wrote:Can somebody please
help me out with telling me how to make it work on my FSX?
-
- Posts: 68
- Joined: 13 Aug 2011, 05:00
Re: A380 Virtual Cockpit released!
Waiting for the fully functional VC for FSX!! Take u'r time!! cuz more tym it takes, More it's WORTH!!!
Re: A380 Virtual Cockpit released!
Hi guys
How can I install PA a380?
I copied a380 files to aircraft and waht now? I turn on fs9 and cant select PA A380
sorry for offtop, I fix it, now Is working
Tom
How can I install PA a380?
I copied a380 files to aircraft and waht now? I turn on fs9 and cant select PA A380
sorry for offtop, I fix it, now Is working
Tom
Last edited by TomKubski on 16 Aug 2011, 14:03, edited 2 times in total.
Re: A380 Virtual Cockpit released!
Sounds like im gonna get low FPS with Mobility HD 4250 256 MB, i cant test because of my broken hard drive, im STILL waiting new.Srilanka wrote:GTX 580 3GB...with many sceneries installed....easyjet12 wrote:BTW, what are your specs, just thinking can i run 20-40 FPS with FSX and HD 4250 graphics card.Srilanka wrote:I tried A380VC with FSX... I got good FPS ( 39FPS ) but the autopilot area is screwed up
-
- Posts: 68
- Joined: 13 Aug 2011, 05:00
Re: A380 Virtual Cockpit released!
I have a question! which variant of the A380 has HUD in the flight deck??? is it the 861????????
Re: A380 Virtual Cockpit released!
This VC is amazing. I never had so much fun with a VC as with this. Thanks PA-Team.
One question: The E/WD shows only black, how i can fix it?
One question: The E/WD shows only black, how i can fix it?
Re: A380 Virtual Cockpit released!
If your using FSX its a Compatability problem...ReneM. wrote:This VC is amazing. I never had so much fun with a VC as with this. Thanks PA-Team.
One question: The E/WD shows only black, how i can fix it?
Re: A380 Virtual Cockpit released!
But I'm using FS9.
A380 Virtual Cockpit released!
Im trying the VC for FSX i know that I am going to get low frame rates but. When i load it up it has my cabin textures, but my vc texture is all black.
Im missing the VC textures. Can anyone give me a link to help me out thanks C:
Im missing the VC textures. Can anyone give me a link to help me out thanks C:
Re: A380 Virtual Cockpit released!
nm i fixed it C:
Re: A380 Virtual Cockpit released!
Read my question again. There is no model in the Model folder. Where is mdl?
Stuart
Stuart
-
- Posts: 235
- Joined: 27 Jan 2010, 11:22
Re: A380 Virtual Cockpit released!
in the common files most likely..
but take it to the support forum... thats what its there for.
but take it to the support forum... thats what its there for.
Re: A380 Virtual Cockpit released!
Hey all, Can someone please help me install it for FSX if it's possible to do so. Thank you in advance
-
- Posts: 235
- Joined: 27 Jan 2010, 11:22
Re: A380 Virtual Cockpit released!
^^ READ ^^ THE ENTIRE TOPIC.
-
- Posts: 185
- Joined: 26 Sep 2009, 23:01
Re: A380 Virtual Cockpit released!
Just waiting on FSX version now....
-
- Posts: 1
- Joined: 03 Jun 2011, 06:48
Re: A380 Virtual Cockpit released!
yeah me too...i just cant get it to work for fsx
Re: A380 Virtual Cockpit released!
Me three , i can understand any of the files that are needed!
Re: A380 Virtual Cockpit released!
I'm beyond frustrated. I've been trying to figure out how to setup the VC on FSX. You guys have done an amazing job with the A380, and now it's even more astounding with the addition of the VC.
Unfortunately, not all of us know how to install the VC. There isn't a simple 3 or 4 step text file anywhere... I've been trying to get things to work for the past two hours without success. The best I managed was having the VC show up when editing the Air France version, but had no textures. It gets very confusing with all the links between files. So many things rely on assets from different folders, etc.
Can someone PLEASE create a simple text tutorial of what lines must be changed in the aircraft & model config & location of where the needed folders have to be placed?
Thanks.
Unfortunately, not all of us know how to install the VC. There isn't a simple 3 or 4 step text file anywhere... I've been trying to get things to work for the past two hours without success. The best I managed was having the VC show up when editing the Air France version, but had no textures. It gets very confusing with all the links between files. So many things rely on assets from different folders, etc.
Can someone PLEASE create a simple text tutorial of what lines must be changed in the aircraft & model config & location of where the needed folders have to be placed?
Thanks.
Re: A380 Virtual Cockpit released!
This release is for FS9 only.
-
- Posts: 1
- Joined: 21 Aug 2011, 12:44
Re: A380 Virtual Cockpit released!
Hey guys,
your VC is realy amazing, the best I had ever seen for the A380. Because I'm working on the Airbus factory in Hamburg, and see the A380 every day, I have a good possibility of comparison. From now, the flying with the A380 in fs9 become a new dimension of reality.
But I have some remarks to your VC. Maybe its up to my PC, or the fs9, but I does't have all of the functions, who stands in the readme file. The first fault is, I cant start the engines with the push buttons on the overhead panel, the engine master levelers are not moving by pushing the hot keys on the keyboard. I just can move them manually with the mouse. the engine start doesnt work manual with pushing on the buttons, only with the hot key on the keyboard. On the System Display the fctl page doesnt work. If I push on the page, the fuel page will be opened.On the hyd page the left fluid reservoir is dissapointed every 2-3 seconds. The SD Pages (fuel,hyd,elec) are really realistic. My question to you, why the EWD not? when the engines are down, in reality the thrust icons become amber like your realistic system pages (elec).. why not in the EWD??? On the last picture from A380 VC prewievs here: http://www.pairbus.com/discussion/viewt ... &start=350 I had seen, that the next display (brightness display) left from the EWD and under the horizont should be working, but my display is black. The MCDU's page on the last photo in the prewievs I cant find in the VC, maybe I dont have this function. On the Changelog you write : 20110812b* model updated to move cockpit window frame. Do you mean, that it's possible to opened the sliding windows or what do you mean?
There are nothing gauges to entry into the gauges folder, is that correct??
In spite of these little bugs, your Cockpit is the best of all for the A380 in the web today.. I hope that you all are not finished with the development of your wonderful work the last years.. maybe you release somewhen an update with new functions in these VC, to make it more fantastic, like it is now.
Thank you for your super Job!!!
your VC is realy amazing, the best I had ever seen for the A380. Because I'm working on the Airbus factory in Hamburg, and see the A380 every day, I have a good possibility of comparison. From now, the flying with the A380 in fs9 become a new dimension of reality.
But I have some remarks to your VC. Maybe its up to my PC, or the fs9, but I does't have all of the functions, who stands in the readme file. The first fault is, I cant start the engines with the push buttons on the overhead panel, the engine master levelers are not moving by pushing the hot keys on the keyboard. I just can move them manually with the mouse. the engine start doesnt work manual with pushing on the buttons, only with the hot key on the keyboard. On the System Display the fctl page doesnt work. If I push on the page, the fuel page will be opened.On the hyd page the left fluid reservoir is dissapointed every 2-3 seconds. The SD Pages (fuel,hyd,elec) are really realistic. My question to you, why the EWD not? when the engines are down, in reality the thrust icons become amber like your realistic system pages (elec).. why not in the EWD??? On the last picture from A380 VC prewievs here: http://www.pairbus.com/discussion/viewt ... &start=350 I had seen, that the next display (brightness display) left from the EWD and under the horizont should be working, but my display is black. The MCDU's page on the last photo in the prewievs I cant find in the VC, maybe I dont have this function. On the Changelog you write : 20110812b* model updated to move cockpit window frame. Do you mean, that it's possible to opened the sliding windows or what do you mean?
There are nothing gauges to entry into the gauges folder, is that correct??
In spite of these little bugs, your Cockpit is the best of all for the A380 in the web today.. I hope that you all are not finished with the development of your wonderful work the last years.. maybe you release somewhen an update with new functions in these VC, to make it more fantastic, like it is now.
Thank you for your super Job!!!
-
- Posts: 3
- Joined: 15 Aug 2011, 05:30
Re: A380 Virtual Cockpit released!
Thank you so much guys. Excellent work!!!
Re: A380 Virtual Cockpit released!
Hi...is it possible to make the seatbeltsign/nosmoking sign, apu bleed/switch, wing and runway turn light operate-able? :?:
Re: A380 Virtual Cockpit released!
And oxygen masks, emergency slides, sex with the flight attendant, chair change, some funky disco lights and airco.isda wrote: Hi...is it possible to make the seatbeltsign/nosmoking sign, apu bleed/switch, wing and runway turn light operate-able? :?:
Re: A380 Virtual Cockpit released!
You gonna lose your job! :lol:sex with the flight attendant
Re: A380 Virtual Cockpit released!
Haha, i want to change to Cathay Pacific. I thought it's legal onboard. LOLLLfsxfan wrote:You gonna lose your job! :lol:sex with the flight attendant
-
- Posts: 3
- Joined: 13 Jul 2011, 08:04
Re: A380 Virtual Cockpit released!
thank you so much PA for all your hard work and dedication to keeping my addiction to flight sim ongoing.
-
- Posts: 5
- Joined: 30 May 2011, 21:47
Re: A380 Virtual Cockpit released!
This may be a silly question but, How do I know which one has the VC when I go to download from your "Downloads" page?
-
- Posts: 68
- Joined: 13 Aug 2011, 05:00
Re: A380 Virtual Cockpit released!
Download fs9 A380 basepack! that link has been updated with the vc model!!
-
- Posts: 2
- Joined: 26 Aug 2011, 07:33
Re: A380 Virtual Cockpit released!
Hello,
Thanks PA for this wonderful plane!!!!
And sorry for my very bad english too.....
Thanks PA for this wonderful plane!!!!
And sorry for my very bad english too.....
Re: A380 Virtual Cockpit released!
Outstanding!! You guys are amazing
Looking forward to the FSX release.
Looking forward to the FSX release.
Re: A380 Virtual Cockpit released!
Hopefully!JPetroSS wrote:Outstanding!! You guys are amazing
Looking forward to the FSX release.