PA A380 VC for FSX
Re: PA A380 VC for FSX
sweeeeet...that fixed it! thank you!
Re: PA A380 VC for FSX
Great job !
Bravo !
I will try it this evening and it makes me want to adapt my baby FMS project at this A380 !
Bravo !
I will try it this evening and it makes me want to adapt my baby FMS project at this A380 !
-
- Posts: 606
- Joined: 08 Aug 2012, 08:04
Re: PA A380 VC for FSX
its impossible to fly with it. Its FS2004 model, and it lags very much.... With your FMs i have 22-30FPS, with a380 7-10 fps...
Re: PA A380 VC for FSX
I have just tried the A380 with the tom ruth's VC. So I don't know how work the PA VC and also the version of facked.
I will try his VC this evening.
I don't know the difference between a FS9 and a FSX .mdl file. But as I must re-write the xml code of the gauge, maybe there is a solution..... My FMS has many many scripts and the impact on the FPS is tiny.
I will try his VC this evening.
I don't know the difference between a FS9 and a FSX .mdl file. But as I must re-write the xml code of the gauge, maybe there is a solution..... My FMS has many many scripts and the impact on the FPS is tiny.
Re: PA A380 VC for FSX
Congratulations Facked, this VC is great !!
My only concern is when flying online on IVAO network, the need to be able to do a direct to any waypoint in the FPL.
I do not think it is possible with the FSX GPS (I did not succeed to do it) ....
And I am not expert enough to adapt the VAS FMS to your VC panel...
My only concern is when flying online on IVAO network, the need to be able to do a direct to any waypoint in the FPL.
I do not think it is possible with the FSX GPS (I did not succeed to do it) ....
And I am not expert enough to adapt the VAS FMS to your VC panel...
May be Fdd your baby FMS project would be the answer ?fdd_fr wrote: I will try it this evening and it makes me want to adapt my baby FMS project at this A380 !
-
- Posts: 17
- Joined: 27 Jan 2013, 20:27
Re: PA A380 VC for FSX
The autopilot is really messed up! How can I fix it! The LNAV isn't correct!
Re: PA A380 VC for FSX
VAS won't work in FSX.
Replace the gauges with Francois' ones if you want more functionality than the default ones.
Replace the gauges with Francois' ones if you want more functionality than the default ones.
-
- Posts: 17
- Joined: 27 Jan 2013, 20:27
Re: PA A380 VC for FSX
Please help! Where can I download those gauges?Alexis wrote:VAS won't work in FSX.
Replace the gauges with Francois' ones if you want more functionality than the default ones.
How can I place them in?
I am not using Vas gauges. I was using the standard that came in the DL
Re: PA A380 VC for FSX
You change the respective gauge coordinates in the panel.cfg, [VCockpitXX] section.
Here's the map with the coordinates, (0,0) being the top left corner.
viewtopic.php?f=12&t=2208&p=22512#p22512
Here's the map with the coordinates, (0,0) being the top left corner.
viewtopic.php?f=12&t=2208&p=22512#p22512
-
- Posts: 17
- Joined: 27 Jan 2013, 20:27
Re: PA A380 VC for FSX
Okay I will see. I still don't quite get it. My question was on the Autopilot. Why isn't it working? And for the Vas FMC does it work for FSX? How can you open cargo doors on the A380 model FSX?Alexis wrote:You change the respective gauge coordinates in the panel.cfg, [VCockpitXX] section.
Here's the map with the coordinates, (0,0) being the top left corner.
viewtopic.php?f=12&t=2208&p=22512#p22512
Re: PA A380 VC for FSX
I have tried your VC.
Great job !
But It is a FPS killer. I think that your work isn't the reason. When I will have time, I will see what I can do.
Fancois
Great job !
But It is a FPS killer. I think that your work isn't the reason. When I will have time, I will see what I can do.
Fancois
Re: PA A380 VC for FSX
Indeed it is, because the model isn't FSX native. That could mean 5 to 25 FPS more.fdd_fr wrote:I have tried your VC.
Great job !
But It is a FPS killer. I think that your work isn't the reason. When I will have time, I will see what I can do.
Fancois
-
- Posts: 130
- Joined: 17 Mar 2012, 19:03
Re: PA A380 VC for FSX
Is there's a chance for a FSX native A380?
Re: PA A380 VC for FSX
No native A380 VC. It isn't good enough in comparison to other FSX cockpits.
Re: PA A380 VC for FSX
I created this merge some months ago, but the project now is some slowed
http://www.youtube.com/watch?v=MzFtYbVHjtY
http://www.youtube.com/watch?v=MzFtYbVHjtY
Re: PA A380 VC for FSX
Hello curi,curi wrote:I created this merge some months ago, but the project now is some slowed
http://www.youtube.com/watch?v=MzFtYbVHjtY
Do you think you can continue your mega merge for fsx with this model ?
Thank you for answer news about your project.
Jules
Re: PA A380 VC for FSX
+1000julesw wrote:Hello curi,curi wrote:I created this merge some months ago, but the project now is some slowed
http://www.youtube.com/watch?v=MzFtYbVHjtY
Do you think you can continue your mega merge for fsx with this model ?
Thank you for answer news about your project.
Jules
Re: PA A380 VC for FSX
Good day all,
VASfmc does work well in FSX as long as you have version 2.1...or the latest one anyways.
Only problem I have is the "clickspots" from the MCDU and FCU.
Please refer to pictures below.
Any advice, tips or corrections would be appreciated Surely I'm not the only one who would love to get this bird airborne.
edit..Brake Accumulator gauge, digital trim, and VDA have all been added since picture taken. Still no joy on clickspots.
VASfmc does work well in FSX as long as you have version 2.1...or the latest one anyways.
Only problem I have is the "clickspots" from the MCDU and FCU.
Please refer to pictures below.
Any advice, tips or corrections would be appreciated Surely I'm not the only one who would love to get this bird airborne.
edit..Brake Accumulator gauge, digital trim, and VDA have all been added since picture taken. Still no joy on clickspots.
Re: PA A380 VC for FSX
Have you tried fullscreen mode? I had some vasfmc clickspot issues in windowed mode from time to time, although usually just a very small offset of a couple of pixels. So ALT+Enter may help.
Re: PA A380 VC for FSX
Still no joy, even on full screen mode.
Perhaps Facked can help us with this topic, perhaps point us in the right direction on the steps needed to take to correct this problem, as in the early stages of the project, he had these overlapping textures.
Here's the full screen picture.
Perhaps Facked can help us with this topic, perhaps point us in the right direction on the steps needed to take to correct this problem, as in the early stages of the project, he had these overlapping textures.
Here's the full screen picture.
Re: PA A380 VC for FSX
@cdnavi8rcdnavi8r wrote:Still no joy, even on full screen mode.
Perhaps Facked can help us with this topic, perhaps point us in the right direction on the steps needed to take to correct this problem, as in the early stages of the project, he had these overlapping textures.
Here's the full screen picture.
Can you tell me, how to get the terrain and brake views under the PFD/NDP. Or is it just because youswitched from Window to Fullscreen mode?!?!
Thanks
Re: PA A380 VC for FSX
Those THS and VDA were from the original panel by the creator of the FSX vc..I just readded them in the VASfms screens.
Re: PA A380 VC for FSX
Could you upload on vatsim your aircraft and your version of vasfmc.cdnavi8r wrote:Those THS and VDA were from the original panel by the creator of the FSX vc..I just readded them in the VASfms screens.
I can't wait because i love Vasfmc !
And what about the 2d panel ?
Jules
Re: PA A380 VC for FSX
I won't..can't release without permission from the original owner.
I have not tested the 2D panel with this, nor do I really intend to.
I have not tested the 2D panel with this, nor do I really intend to.
Re: PA A380 VC for FSX
Can you ask him for his permission please?!cdnavi8r wrote:I won't..can't release without permission from the original owner.
I have not tested the 2D panel with this, nor do I really intend to.
Re: PA A380 VC for FSX
It's a veru good idea !!
Could you please upload a sceeenshoot from the 2d panel ?
Jules
Could you please upload a sceeenshoot from the 2d panel ?
Jules
Re: PA A380 VC for FSX
Hey man.... do you think you could do a little tutorial or something like that on how you got it to work with the pa a380....cause my earlier tries all failed.cdnavi8r wrote:Still no joy, even on full screen mode.
Perhaps Facked can help us with this topic, perhaps point us in the right direction on the steps needed to take to correct this problem, as in the early stages of the project, he had these overlapping textures.
Here's the full screen picture.
Re: PA A380 VC for FSX
K, guys, I sent a message to the owner/builder if this FSX panel, hopefully we can get steps started in the coming days. Just awaiting a response to see where we stand.
Be patient
Be patient
Re: PA A380 VC for FSX
I need some help in how to install the VC cause this is my first time installing a VC as I am new to FSX. It is a nightmare for me to use the default 747 cockpit for flying the PA A380 so please send me a zip file with everything there as I don't get how to install it as I can't a file named A321.CAB also confuse me that how about the files inside the download zip file from youfacked wrote:Hi everyone.
Today is the day that some of you have been waiting patiently.
The day that you can fly the PA A380 in FSX converted by me.
Here is the link:
http://library.avsim.net/esearch.php?DL ... CatID=root
Don't forget that this is Unofficial conversion of the PA A380, so expect some bugs.
Hope you enjoy.
So hope you can help me...
Re: PA A380 VC for FSX
Hello facked,
Do you think you are going to create a overhead panel 2d for the a380 ?
Im very impatient for that.
Jules
Do you think you are going to create a overhead panel 2d for the a380 ?
Im very impatient for that.
Jules
Re: PA A380 VC for FSX
Hello,
I have a question about liveries :
Can we add other liveries instead of the Emirates?
Thks for your answer
I have a question about liveries :
Can we add other liveries instead of the Emirates?
Thks for your answer
Re: PA A380 VC for FSX
SQ859 wrote:I need some help in how to install the VC cause this is my first time installing a VC as I am new to FSX. It is a nightmare for me to use the default 747 cockpit for flying the PA A380 so please send me a zip file with everything there as I don't get how to install it as I can't a file named A321.CAB also confuse me that how about the files inside the download zip file from youfacked wrote:Hi everyone.
Today is the day that some of you have been waiting patiently.
The day that you can fly the PA A380 in FSX converted by me.
Here is the link:
http://library.avsim.net/esearch.php?DL ... CatID=root
Don't forget that this is Unofficial conversion of the PA A380, so expect some bugs.
LINK DEAD! PLEASE POST NEW!
Hope you enjoy.
So hope you can help me...
-
- Posts: 1
- Joined: 08 Apr 2013, 02:07
Re: PA A380 VC for FSX
Hello to all
it looks like that Avsim have removed or delte the Files in the Libary. So please can anyone reupload this or maybe send me the files per mail?
Also i try to contact facked but i get no response.
greets
Tobias
it looks like that Avsim have removed or delte the Files in the Libary. So please can anyone reupload this or maybe send me the files per mail?
Also i try to contact facked but i get no response.
greets
Tobias
-
- Posts: 17
- Joined: 27 Jan 2013, 20:27
Re: PA A380 VC for FSX
I really want the files as well! I really like it! Please PM or email me the files thanks. rohanpatelt7@gmail.comiflyvienna wrote:Hello to all
it looks like that Avsim have removed or delte the Files in the Libary. So please can anyone reupload this or maybe send me the files per mail?
Also i try to contact facked but i get no response.
greets
Tobias
Re: PA A380 VC for FSX
Same question... i really enjoy looking your pictures each time i visit this page, but could never download your work from avsim.net because the file isn't there anymore. Will it possible to download your updated VC for FSX at some point in future?
Greets Georg!
Greets Georg!
-
- Posts: 606
- Joined: 08 Aug 2012, 08:04
Re: PA A380 VC for FSX
VC isn't for FSX. He's just corrected bugs.
Re: PA A380 VC for FSX
I meant the corrected version, he uploaded some time ago. Is there a possible to get the corrected file?
-
- Posts: 606
- Joined: 08 Aug 2012, 08:04
Re: PA A380 VC for FSX
I don't know. I had this file, but I deleted it, because that VC drops FPS very much..
Re: PA A380 VC for FSX
So, if there's somebody who has this file at the moment, it would be really nice to gimme a short PM...
-
- Posts: 8
- Joined: 03 Jun 2013, 08:21
YAY!-fully working FSX A380 VC-working link
After long searching, here we go:
http://www.rikoooo.com/en/downloads/viewdownload/6/560
a fully working tweaked PA A380 with the FS9 A380 VC modified by 'Facked' to work in FSX without any problems (at least for me, with vasFMC installed), works like a charm.
http://www.rikoooo.com/en/downloads/viewdownload/6/560
a fully working tweaked PA A380 with the FS9 A380 VC modified by 'Facked' to work in FSX without any problems (at least for me, with vasFMC installed), works like a charm.
Re: PA A380 VC for FSX
Does anyone have this package? The one from rikoooo has no working ECAM.
-
- Posts: 106
- Joined: 01 Jul 2011, 11:39
Re: PA A380 VC for FSX
Does anyone have this package? I would really appreciate a PM if you do only found out about this project now...
-
- Posts: 606
- Joined: 08 Aug 2012, 08:04
Re: PA A380 VC for FSX
Here you go: http://www.rikoooo.com/en/downloads/viewdownload/6/560
P.S. ECAM is working in 2D panel only. I don't know why.
P.S. ECAM is working in 2D panel only. I don't know why.
-
- Posts: 1
- Joined: 14 Aug 2013, 19:43
Re: PA A380 VC for FSX
Link is broken.....facked wrote:Hi everyone.
Today is the day that some of you have been waiting patiently.
The day that you can fly the PA A380 in FSX converted by me.
Here is the link:
http://library.avsim.net/esearch.php?DL ... CatID=root
Don't forget that this is Unofficial conversion of the PA A380, so expect some bugs.
Hope you enjoy.
((
Could you upload it again please???
-
- Posts: 606
- Joined: 08 Aug 2012, 08:04
Re: PA A380 VC for FSX
http://www.rikoooo.com/en/downloads/viewdownload/6/560
Im uploading it 2nd time.. No one reads posts above.
Im uploading it 2nd time.. No one reads posts above.
Re: PA A380 VC for FSX
Okay does anyone have the vc with a working ECAM by facked?
-
- Posts: 106
- Joined: 01 Jul 2011, 11:39
Re: PA A380 VC for FSX
I remembered that you had to change a few lines in a file in the aircraft folder.. not very helpful I know, but the answer is on the PA forum but I can't remember where...
Re: PA A380 VC for FSX
What the panel cfg or aircraft cfg. Or just a regular file?
-
- Posts: 106
- Joined: 01 Jul 2011, 11:39
Re: PA A380 VC for FSX
OK I **think** I found it, add ANTEXP in the title in the fltsim.X section, just like the way you add the HUD, tell me if that works.
-
- Posts: 1
- Joined: 26 Jan 2014, 16:57
Re: PA A380 VC for FSX
Is there an ILS button in the VC?