Project Airbus – Talk

zaflyer

Hi Wulf...Well, I had created folders in my main FSX Airplanes section inadvertently (I use F: Drive for my PA Airbuses..always worked OK) I thought, great' problem solved..but no. I deleted them. Here's the contents of the Panel.cfg. Apologies for missing it. Again, this is really odd. Thanks ZA //...

zaflyer

Hi Guys.. Tried everything that you've suggested and still no joy. I've double checked declarations etc...All seems OK.. I'm using the 'panel update 1.521' which seems to have the whole new AC, gauges etc in the folder. I've got this version of the panel in that " A320-CFM Version © Francois DO...

zaflyer

Hi Wulf.. Thanks for the reply. In answer to your first Q..I manually added the folders then I used the auto installer (got a feeling this isn't the right way) Here are the images: http://img4.hostingpics.net/thumbs/mini_318924listoffolders.jpg http://img4.hostingpics.net/thumbs/mini_148620paneldate...

zaflyer

Hi Wulf.. Did as you advised. Still the same result. All the pop ups are working..it just seems like the main gauges are missing..I used the latest download too (1.521) So, not sure waht the problem is. I've cleaned out all my PA AB's too..Drastic I know.. Miss them. I also used the 'Update Panel Ap...

zaflyer

Thanks Wulf...Will give this a try..

zaflyer

]Hi There... Got a problem...I've tried to update my A320 CFM/IAE using the 1.521 panel update... I'm getting this: http://img11.hostingpics.net/pics/314370Untitled.jpg Basically, it seems that half the panel is missing and it wont' respond to mouse commands....I've got the correct versions in..Anyy...

zaflyer

Thanks Guys..

zaflyer

Hi Francois.. sometime ago, I had a problem getting the FMC to work...My PC crashed and I've now got a new 'build' so I'm having to start again with FSX..First thing I did was to add the AB package (A320)..Happy to say..It's working fine now..One Q..I installed the FD-FMC Folder...before I'd added G...

zaflyer

Hi Francois et al..
Not been able to access FSX as my HD and GC card became kaput last week...Doing this on my laptop! So not been able to fix the problem. I think a new install might be on the way...

zaflyer

Francois... "I believe that you use XMLTools.dll 2.01. Try to place the 2.0 (provided in the aircraft pack)..." Just done that and I'm now getting a lot of coded stuff. Used Notepad. It doesn't seem to put it into text I can edit. Sorry. Just spent ages looking for a programme that will op...

zaflyer

Thank you both. Much appreciated. Francois...It is there. Just checked again. Wulf. Thanks. That could be an issue.

Thanks
ZA

zaflyer

Hi..Zaflyer here... Just got back. Thanks got your helpful suggestions and I took your colleagues Tom's advice. I removed the reference to the XMLVars.dll as suggested and edited the .cfg (it wasn't there anyway in the 'trusted' section) Sorry to say, still no joy. I'll keep trying.Please pass on my...

zaflyer

Hi Wulf.. Done as requested..Still no joy. URL=http://www.hostingpics.net/viewer.php?id=780771Wahtdoes.jpg] http://img15.hostingpics.net/pics/780771Wahtdoes.jpg [/URL] Does the 0 in this pic mean anything? Appreciate the help from you guys, but I've got to go away for a long weekend tomorrow..So won...

zaflyer

Hi Francois and Wulf... Wulf: This is what I'm seeing when I'm trying to find a STAR: http://img15.hostingpics.net/pics/573889STAR.jpg This is Where my FMC folder ids Francois: http://img15.hostingpics.net/pics/264987FMC.jpg I know this is really odd. It all worked before Win 10!! :@ It's worth ment...

zaflyer

Hi Francois..Thanks...Yep, that's how I've got it...I'm wondering if I've written the FMC_Path.ini incorrectly? This is my 'Trusted' Section of my .cfg: [Trusted] C:\FSX\GAUGES\Cessna.DLL.wuctrcrhuzeqreztnrbrkohozklurzeccktliibr=2 C:\FSX\GAUGES\Cessna172.DLL.zilbheqhnzwzhtnelobcteahhqrzkqbhkczutziq=...

zaflyer

Wulf and Francois..Thanks for your help...I managed to get the xml tool file recognised by FSX (it asked me to run it) Now I'm just getting a blank SID/STAR table...I've updated the DLL.XML as required and checked the .cfg..Here's the entry as t stands: <?xml version="1.0" encoding="W...

zaflyer

Hi Francois..Can't seem to find the xml tools file or any mention of it in the trusted section. I know you're busy with the other thing..any help is appreciated.
Thanks
RalphC

zaflyer

OK..Thanks for the quick response. I'll look into it.

zaflyer

Hello..
I've just moved from Win 7 to Win 10

So far so good, except that when I go to the FMC to load a SID..I'm getting the SID title, but no other info.

Not sure why this is..Any ideas please?
Many thanks
RalphC

zaflyer

Update:
Sorry, sorted it...It was how the data was provided that confused me. Thanks again

zaflyer

Hi Francois...
Thanks for the updates. Just clicked on the ' 'Here a hotfix with the Autopilot gauge' ( http://freenavdbgroup.com/Temp/A3xx_autopilot.xmland) got a load of data...is this correct? If so, I'm assuming I copy it and add it to the .xml file?
Sorry if it's a dumb Q...

zaflyer

Thanks for your help. ...Sorted it now..

zaflyer

Hi ...
Sorry, I'm getting the DNS too

Thanks ZA

zaflyer

Hi Francois...
Great stuff and thanks for your time. I checked the FSX Folder and the XMLTools.dll is there. That bit I understood...

I printed your manual today..The amount of time that has gone into producing it must've been huge. It's very precise and very helpful.
Thanks Again
Ralph

zaflyer

Hi Francois... This is a very kind offer. I did a quick 20 mins test flight without problems, however I didn't use the FMC.Hopefully it's attached..probably a bit of a mess actually... :( Here's the offending .dll <?xml version="1.0" encoding="Windows-1252"?> <SimBase.Document Ty...

zaflyer

Hello Wulf
OK..Thanks...DOH! I'll change it

I did do a flight and it seemed OK after 10 mins or so...But. it probably would've crashed.
Thanks for your time.
Ralphc

zaflyer

Hello Wulf.. Thanks so much for your quick response. I did have other .dll's in there (Vars.dll) I've added the Simbase.Document to the end of the entry...I kept the Simbase.Document after Lanch.Addon..Assuming that's correct? Now it's just where to put the C++ Redistr files. I'll give the AB a test...

zaflyer

Hello All.. Thanks Francois for the latest A321...All was going well until mid flight..FSX crashed. I suspect that it might have something to do with the .dll file. I've edited it..But not sure if I've done it correctly. :/ Here's an extract of the (what I think) are the important bits; <Name>XMLVar...

zaflyer

Great Work...Bai Dankie

zaflyer

Hi Francois...
"Sorry for the delay" Please don't apologise, your dedication and hard work is commendable. I and I suspect many others really appreciate your contribution.
Thanks and best wishes
RalphC

zaflyer

OK..Sorted it...Found the solution in:
Project Airbus Airbus A318/A319/A320 FSX models.
===

zaflyer

Hi.. Bit of a trivial one this. I've noticed that the contrails in the A3190 and A320 when used in FSX appear above and below the aircraft. I've checked and found these on this forum: [SMOKESYSTEM] smoke.0=88.0,-39.8,-17.3, fx_contrail_320 smoke.1=88.0,39.8,-17.3, fx_contrail_320 http://img11.hostin...

zaflyer

Great stuff Francois..Done the trick..
Thanks ..

zaflyer

Hi.. I've just added the: Airbus A318 FD-FMC Version - based on Project Airbus A318 aircraft Version : beta 0.99 May,30 2012 To my FSX..Very nice too..However, when I launched it..I got a large batch of red text on in the top left of my display..Any ideas please as to what it is and how to get rid o...

zaflyer

Hi Francois.. Happy to report that I've just completed my first flight (LFRK-LFLB) using the FMC (latest version) from take off using SID to approach and landing using STAR..Brilliant. One thing I've still not got right is the hold pattern using the CSTR...didn't seem to want to do it. Really enjoye...

zaflyer

Hi Francois..
Just checked the site and it translated to English really quickly, no problems. Don't apologise for the delay...BTW..appreciate all you do.
Thanks
Ralph

zaflyer

Hi Francois Been away for a while...Looks like you've been very busy. :) Thanks for the advice on approaches in 'Managed Mode' ..will give it a go. Not been simming for a while so I'm looking forward to getting back to it. THe new additions to the panel look very helpful. Look forward to getting upd...

zaflyer

Hi Again..
I think I did. Stress the "think." Going to have another go this pm and check all the things you've kindly mentioned. I'm normally OK with an ILS app. I could've been distracted with all the 'bells & whistles" of the FMS!
Thanks ZA

zaflyer

Hi Airbus fan.. Thanks for the response..I did have the APP on....Got to admit though, I'm a little confused re: the FCU and what to have 'on' when using the FMS...GPS/NAV? (they aren't part of the FCU..I know but ...) I guess it's down to practice..Actually got the female cabin crew voice today!! (...

zaflyer

Hi Again Francois.. Not sure if this is a "reply" but more of a Q...I've finally managed to do a flight using the FMS..almost. Used SID for the TO etc and the cruise was fine. I'm amazed as to how good this is!! :) Thanks...It's taken you aeons of work...I have one Q (as usual :oops: ) My ...

zaflyer

HI Francois ..
Here's my contribution to the installer. I've got Win 7 - 32 bit ..
USA Origin of Win 7 ..ran it as Administrator..

The 'Set up' 1 was/is fine..pointed to the correct locations except mine are little different than yours..it gets there

Hope this is OK...
Thanks
Ralph

zaflyer

Hi Again Francois SUCCESS!! :) Sorted it thanks, went back and checked again. I remember, I had to do an 're-initiation' to fix another problem and that rendered the .dll invalid insofar it stuck it into an 'old' folder ..Difficult to explain, but I just copied the text from that to the new .dll and...

zaflyer

Hi Francois.. Thanks for the quick response. I've checked the "trusted" part of the .cfg...They aren't there..which is odd, as they were before. I actually had it working..I'll go back and re-install the .dll's and double check the other things mentioned. The folder is in the the main FSX ...

zaflyer

Hi Francois. Been away from my Airbus for a while and clearly missed quite a lot of developments..Still trying to catch up!! :) Looks like you've been very busy. I like the idea of an auto installer BTW...I would though, not brilliant at installing etc..I've just installed Panel 0.76 When I returned...

zaflyer

Hi Francois and all Really appreciate you sending these...just had them out for a spin :) They look very very good... http://img11.hostingpics.net/pics/722358AFOutLOWI.jpg This is the PA A320 CFM leaving LOWI (above) And then: http://img11.hostingpics.net/pics/514650Inflight.jpg And the Rads etc: ht...

zaflyer

Hi Francois.. Thanks for the video link. The lighting looks very impressive and I look forward to the update...Is this ( probably is) the true colour of the AB CP at night? The update of the FMC looks interesting too..Do you ever sleep?? ;) Luckily for us mortals, not ;) I want to watch the Vid agai...

zaflyer

Hi Françoise.. Thanks for the update....As usual, very much appreciated. The 2D start up is good, seems quicker too. Had it for a quick test flight...The engines have a satisfying 'hum' to them...No Children in the background noise though,..then again I'm hard of hearing ;) Excellent job. BTW... I u...

zaflyer

Hi Chaps.. Thanks for the replies and I'm glad that my input has been off some value...Nice surprise this Sunday morning to wake up to a new panel Beta!! :D Try to give it a go today...I don't have two children BTW..but one very busy grandson whose staying with us...When it comes to flying and testi...

zaflyer

Hi Chaps... Francis..The ones I used are an update which changes the colour of the CP and the seats too: you want: "Virtual Cockpit" textures Upgrade in "strong gray color" If you look on FS.Com you should find the file: Here it is fsx_airbus_cockpit_texture_upgrade_v-gray.zip Ho...

zaflyer

Hi Francois
As you can see, sorted out the TAWS and I've also sorted the VC blurriness...stuck some updated C.dds files in the main textures folder..So we're good to go

Thanks for the help
Ralph

Search found 117 matches