A320 Series Flaps Position in FSX

[hely1992]

Hi!

I am using the great A320 Series in FSX with default A321 panel,Inotice that the position 1 seem to be slats only,and flaps full is actually 80% down.

I hope the aircraft to suit the default panel.Do you have any advice?Or is it possible to modify default gauge?

A320:
[Flaps.0]
type=1
span-outboard=0.85
extending-time=21.000
system_type=1
damaging-speed=233.000
blowout-speed=250.000
flaps-position.0=0.000,
flaps-position.1=0.000,
flaps-position.2=15.000,
flaps-position.3=20.000,
flaps-position.4=26.000,
flaps-position.5=35.000,
lift_scalar=0.0
drag_scalar=0.0

[flaps.1] //slats
type=2
span-outboard=0.95
extending-time=20
flaps-position.0=0
flaps-position.1=18,
flaps-position.2=18,
flaps-position.3=22,
flaps-position.4=22,
flaps-position.5=27,
blowout-speed=260
lift_scalar=0.35
drag_scalar=0.45
pitch_scalar=0.3
system_type=1

Default A321:
[flaps.0] //Trailing Edge Flaps
type = 1 // 1 - tail, 2 - lead
span-outboard = 0.8 // 0.0 .. 1.0
extending-time = 20 // seconds
flaps-position.0 = 0 // degrees
flaps-position.1 = 10 // degrees
flaps-position.2 = 15 // degrees
flaps-position.3 = 20 // degrees
flaps-position.4 = 40 // degrees
damaging-speed = 250 // KIAS
blowout-speed = 300 // KIAS
lift_scalar = 0.7
drag_scalar = 0.2
pitch_scalar= 1.0
system_type = 1 //Hydraulic

[flaps.1] //Leading Edge Slats
type = 2 // 1 - tail, 2 - lead
span-outboard = 0.8 // 0.0 .. 1.0
extending-time = 10 // seconds
flaps-position.0 = 0 // degrees
flaps-position.1 = 18.0 // degrees
flaps-position.2 = 22.0 // degrees
flaps-position.3 = 22.0 // degrees
flaps-position.4 = 27.0 // degrees
damaging-speed = 250 // KIAS
blowout-speed = 300 // KIAS
lift_scalar = 0.3
drag_scalar = 0.2
pitch_scalar= 0.0
system_type = 1 //Hydraulic

[Ratinho]

If using the default A321 panel with the A320, my advise is:
Go to the aircraft.cfg file of the A320 and copy/paste the settings of the default A321 flaps.0

flaps.0]
type = 1
span-outboard = 0.8 // 0.0 .. 1.0
extending-time = 20 // seconds
flaps-position.0 = 0 // degrees
flaps-position.1 = 10 // degrees
flaps-position.2 = 15 // degrees
flaps-position.3 = 20 // degrees
flaps-position.4 = 40 // degrees
damaging-speed = 250 // KIAS
blowout-speed = 300 // KIAS
lift_scalar = 0.7
drag_scalar = 0.2
pitch_scalar= 1.0
system_type = 1 //Hydraulic