landing light problem on PA Delta A321 NEO

[epopchock]

I recently did a night flight on the Project Airbus A321 NEO by Chris Evans (in the Delta livery) from New York to West Palm Beach, and upon landing, I noticed that the landing lights don't illuminate the runway at all, but the taxi lights work just fine. Upon switching to outside view after landing, i noticed that while the landing lights are on, they only cast a very dim shadow immediately in front of the front nose gear of the aircraft, but don't project any further than that. I posted in another forum about this and they suggested replacing the spotlight bmp. file in the FSX Texture folder. I tried that, but that didn't work either (the landing light still doesn't illuminate the runway). Is there anything else I could try to fix this issue? Any suggestions would be appreciated. here's a copy of the effects, lights, and electrical sections of the aircraft cfg. file for this aircraft, along with a screenshot of the problem I am having, plus the link to the website where I got this aircraft from:

https://simviation.com/1/search?submit= ... &x=21&y=14

https://1drv.ms/i/c/654bd515da3faae5/ET ... w?e=w4FqRx

From Delta Airbus A321 NEO by Chris Evans
[effects]
wake=fx_wake
water=fx_spray
dirt=fx_tchdrt
concrete=fx_sparks
touchdown=fx_tchdwn, 1


[lights]
light.0=3, -77.90, -0.15, 4.80, fx_navwhih
light.1=2, -77.90, 0.15, 4.80, fx_strobeh
light.2=1, 6.80, 0.00, -5.80, fx_beaconh
light.3=1, 3.83, 0.00, 8.47, fx_beaconh
light.4=4, 47.0, 0.00, 4.1, fx_vclighth ,

[electrical]
;BusType, MaxAmpLoad, MinVoltage BusTypes:0=MainBus,1=AvionicsBus,2=BatteryBus,3=HotBatteryBus,4-7=Generator/AlternatorBus(1-4)
max_battery_voltage = 24
generator_alternator_voltage = 28
max_generator_alternator_amps = 200
electric_always_available = 1
flap_motor = 0, 5 , 17.0
gear_motor = 0, 5 , 17.0
autopilot = 0, 5 , 17.0
avionics_bus = 0, 0 , 17.0
avionics = 1, 0 , 17.0
pitot_heat = 0, 2 , 17.0
additional_system = 0, 0 , 17.0
marker_beacon = 1, 2 , 17.0
gear_warning = 0, 2 , 17.0
fuel_pump = 0, 5 , 17.0
starter1 = 0, 20 , 17.0
starter2 = 0, 20 , 17.0
light_nav = 0, 0 , 17.0
light_beacon = 0, 5 , 17.0
light_landing = 0, 5 , 17.0
light_taxi = 0, 5 , 17.0
light_strobe = 0, 5 , 17.0
light_panel = 0, 0 , 17.0
light_cabin = 0, 0 , 17.0
auto_brakes = 0, 0 , 17.0
standby_vacuum = 0, 0 , 17.0
hydraulic_pump = 0, 0 , 17.0
fuel_transfer_pump = 0, 0 , 17.0
light_recognition = 0, 0 , 17.0
light_wing = 0, 0 , 17.0
light_logo = 0, 0 , 17.0
directional_gyro = 0, 0 , 17.0
directional_gyro_slaving = 0, 0 , 17.0