A32X v2.2 for FS9 released

Jaco23 · Post by **Jaco23** » 20 Sep 2014, 13:44

The320Pilot wrote:
esg wrote:Changing the paths inside panel and sound.cfg to point to the default A321's is all it takes.
Sadly, that's not true (at least for me). The A318, 319 and 320 are completely transparent in my FSX. The only model that is not transparent is the A321 but I can't start the engines.

As the title says, these models are for FS9. We just have to wait for the FSX models to be released.

For me the A32X v2.2 on FSX works perfectly. Do you have installed FSX SP's 1 and 2?

Post by **esg** » 20 Sep 2014, 13:47

Yes, that does sound like you've not installed the service packs.

The320Pilot · Post by **The320Pilot** » 20 Sep 2014, 14:06

Jaco23 wrote:For me the A32X v2.2 on FSX works perfectly. Do you have installed FSX SP's 1 and 2?

I have both SP1 and SP2 installed.

jamanchores727 · Post by **jamanchores727** » 20 Sep 2014, 15:53

Hi!

First of all, thank you PA for the sharklet model. Very impressive work.

Just wanted to ask, if you will support Shockwave 3D Lights by A2A Simulations for the sharklet model? If yes, is there any config available as early as now?

Thank you.
Jam

Post by **esg** » 20 Sep 2014, 15:57

I don't think any of us use Shockwave 3D. You might have better luck asking on A2A's forum. Sorry!

syafiq lazim · Post by **syafiq lazim** » 20 Sep 2014, 16:53

jamanchores727 wrote:Hi!

First of all, thank you PA for the sharklet model. Very impressive work.
Just wanted to ask, if you will support Shockwave 3D Lights by A2A Simulations for the sharklet model? If yes, is there any config available as early as now?

Thank you.
Jam

It can be add with shockwave lights, but maybe has to remove some lines in lights section because some lights already hard-coded in the model, if I'm not mistaken, navigation light & strobe lights are hard-coded, so, you can put the other light if you want, such landing lights, taxi light, wing light.

jordanf94 · Post by **jordanf94** » 20 Sep 2014, 18:40

Hi

On the TCX A321 sharklet the night for the wing ans sharklet texture appear to be transparent.
Is there a fix for this?

Thanks.

sknepper · Post by **sknepper** » 21 Sep 2014, 07:49

To see them in FSX and use then the 2D panel, remove or add a "//" before the "interior= " line in the model.cfg file, leaving the other lines as they are.

jamanchores727 · Post by **jamanchores727** » 21 Sep 2014, 11:19

esg wrote:I don't think any of us use Shockwave 3D. You might have better luck asking on A2A's forum. Sorry!

Oh I see... Thanks anyway!

The320Pilot · Post by **The320Pilot** » 21 Sep 2014, 15:32

sknepper wrote:To see them in FSX and use then the 2D panel, remove or add a "//" before the "interior= " line in the model.cfg file, leaving the other lines as they are.

And what should I do if I want to use a VC?

Post by **esg** » 21 Sep 2014, 15:35

Cry at night.

The320Pilot · Post by **The320Pilot** » 21 Sep 2014, 16:29

esg wrote:Cry at night.

KillerK · Post by **KillerK** » 22 Sep 2014, 02:43

jamanchores727 wrote:Hi!

First of all, thank you PA for the sharklet model. Very impressive work.
Just wanted to ask, if you will support Shockwave 3D Lights by A2A Simulations for the sharklet model? If yes, is there any config available as early as now?

Thank you.
Jam

Try this for the A320:

[lights]
light.0= 4, 44.41, 0.00, 3.50, fx_vclighth
light.1 = 5, 1.00, 6.90, -3.50, fx_shockwave_landing_light_narrow_down ,
light.2 = 5, 1.00, -6.90, -3.50, fx_shockwave_landing_light_narrow_down ,
light.3 = 6, 38.00, 0.00, -5.50, fx_shockwave_landing_light_double ,
light.4 = 6, 38.00, 0.00, -7.25, fx_shockwave_landing_light_double_vsmall
light.5 = 5, 15.00, 6.90, -3.50, fx_shockwave_landing_light_light ,
light.6 = 5, 15.00, -6.90, -3.50, fx_shockwave_landing_light_light ,

jjfan1 · Post by **jjfan1** » 27 Sep 2014, 16:33

Any news on the JetBlue repaints?

Patman101 · Post by **Patman101** » 27 Sep 2014, 20:12

There is an a320 package on simviation with jetblue liveries
http://simviation.com/1/browse-Civil+Je ... 7342#47342

Alex_94 · Post by **Alex_94** » 28 Sep 2014, 01:29

hey tavers, any idea when you'll be releasing your air nz and jetstar sharklet liveries?

bokick · Post by **bokick** » 28 Sep 2014, 06:19

I've made all jetstar sharklets liveries. Maybe next day available at flightsim.com. 100th jetstar special livery has available at flightsim

Post by **Tavers** » 28 Sep 2014, 13:31

Alex_94 wrote:hey tavers, any idea when you'll be releasing your air nz and jetstar sharklet liveries?

I'll get NZ done tomorrow. I've pulled the plug on the Jetstar livery for now.

jesusvaron · Post by **jesusvaron** » 28 Sep 2014, 13:57

JetBlue Sharklets in FSX.

Alex_94 · Post by **Alex_94** » 28 Sep 2014, 22:40

oh thats a shame tavers

jäätee · Post by **jäätee** » 29 Sep 2014, 19:56

A321 link is NOT WORKING!

Post by **esg** » 29 Sep 2014, 20:03

OMG!!!

(I've fixed it.)

jäätee · Post by **jäätee** » 29 Sep 2014, 20:08

Thank you.

ellisonairplane4 · Post by **ellisonairplane4** » 29 Sep 2014, 20:23

The a32xceo is awesome

thank you project airbus for the great a32xceo. And i request a repaint of kuwait airways a320neo

jäätee · Post by **jäätee** » 30 Sep 2014, 18:15

Where is the Swiss livery hiding?

viewtopic.php?t=2981&start=150#p26595

Post by **esg** » 30 Sep 2014, 19:05

I've added to the OP.

Alex_94 · Post by **Alex_94** » 30 Sep 2014, 23:11

i just noticed with the swiss livery, the yellow paint on the flap track fairings is only on the right side and the cross on the inside of the sharklet is a little bit distorted. it could maybe be brought forward away from the edge of the model?

Post by **Tavers** » 01 Oct 2014, 06:33

Alex_94 wrote:i just noticed with the swiss livery, the yellow paint on the flap track fairings is only on the right side and the cross on the inside of the sharklet is a little bit distorted. it could maybe be brought forward away from the edge of the model?

The yellow is only on the right hand side flap canoes on the real aircraft. I'll fix the winglets.

Davie · Post by **Davie** » 01 Oct 2014, 09:56

What panel are you all using with this (for FS9)?

Anybody have any recommendations?

Flusimmer · Post by **Flusimmer** » 01 Oct 2014, 11:10

vasFMC. Best Freewarepanel out there.

Alex_94 · Post by **Alex_94** » 01 Oct 2014, 21:22

@tavers, im telling you haha

left side: http://www.airliners.net/photo/Swiss-In ... 360141590b
right side: http://www.airliners.net/photo/Swiss-In ... 360141590b

Post by **Tavers** » 02 Oct 2014, 00:39

Alex_94 wrote:@tavers, im telling you haha

left side: http://www.airliners.net/photo/Swiss-In ... 360141590b
right side: http://www.airliners.net/photo/Swiss-In ... 360141590b

There is NO yellow on the left hand side as evident in the pics you posted.......

Alex_94 · Post by **Alex_94** » 02 Oct 2014, 08:10

sorry mate, i read your previous comment wrong.. my bad

but yeah, your paint has the yellow canoes on both sides

The320Pilot · Post by **The320Pilot** » 02 Oct 2014, 19:58

Can PA staff please give to the community some news about the FSX Sharklet models? How's the work progressing?

Alex_94 · Post by **Alex_94** » 02 Oct 2014, 22:44

There isnt any, otherwise you would have heard about it already

Post by **Nick L** » 03 Oct 2014, 01:44

It is still being worked on. There is not enough to show at this point, but progress is still being made.

The320Pilot · Post by **The320Pilot** » 03 Oct 2014, 02:54

Nick L wrote:It is still being worked on. There is not enough to show at this point, but progress is still being made.

Ok, thanks.

I know you guys don't like us to ask you when is any project going to be released, but, the way the FSX models are right now, more or less, when could they be shown up to the simmers?

Post by **Tavers** » 03 Oct 2014, 03:42

The320Pilot wrote:
Nick L wrote:It is still being worked on. There is not enough to show at this point, but progress is still being made.
Ok, thanks.
I know you guys don't like us to ask you when is any project going to be released, but, the way the FSX models are right now, more or less, when could they be shown up to the simmers?

WHEN they're finished. They look the same, no point in showing anything...

Post by **esg** » 03 Oct 2014, 08:48

The320Pilot wrote:
Nick L wrote:It is still being worked on. There is not enough to show at this point, but progress is still being made.
Ok, thanks.
I know you guys don't like us to ask you when is any project going to be released, but, the way the FSX models are right now, more or less, when could they be shown up to the simmers?

I've said many times we can't give an answer to that 'cause we don't work on a schedule. There's no use asking.

markm24 · Post by **markm24** » 03 Oct 2014, 14:01

esg wrote:
The320Pilot wrote:
Nick L wrote:It is still being worked on. There is not enough to show at this point, but progress is still being made.
Ok, thanks.
I know you guys don't like us to ask you when is any project going to be released, but, the way the FSX models are right now, more or less, when could they be shown up to the simmers?
I've said many times we can't give an answer to that 'cause we don't work on a schedule. There's no use asking.

Some people needs to add the word "PATIENCE" in there vocabulary.

esg, prolong your "patience" for these people ahahahaha

The320Pilot · Post by **The320Pilot** » 03 Oct 2014, 14:06

esg wrote:I've said many times we can't give an answer to that 'cause we don't work on a schedule. There's no use asking.

noahjharget · Post by **noahjharget** » 04 Oct 2014, 01:53

Can someone please provide a video on how to instll the aircraft and liviries to FSX. I installed as i would any aircraft and I can't got them to show up in fsx. Please help!

thealaskanmike · Post by **thealaskanmike** » 10 Oct 2014, 00:11

When you guys do release the sharklet models for FSX, will you be posting it on the PA home page or will it just be in the forums?

-mike

Post by **esg** » 10 Oct 2014, 01:30

Both.

pkpjn2000 · Post by **pkpjn2000** » 15 Oct 2014, 10:47

too many kittens died these days...

costalufthansafan · Post by **costalufthansafan** » 16 Oct 2014, 13:13

what i have to do if I want to make the Airbus 320-214 sharklets work in FSX? i tried but the aircraft (i have installed the fanhansa livery) doesn't appear on the aircraft menu....

Kyle Schurb · Post by **Kyle Schurb** » 16 Oct 2014, 15:04

Change the panel/sound folders to default FSX A321.

costalufthansafan · Post by **costalufthansafan** » 16 Oct 2014, 19:01

Thank you Kyle! Now it works perfectly! A little question: when you will release a Lufthansa standard livery for the Airbus 320-200 sharklets cfm?

Silverwings · Post by **Silverwings** » 17 Oct 2014, 13:44

The FS9 vesrion will not work in FSX period. Just wait for the FSX version. I know it is a beautiful plane, believe me, I've been waiting for an A320 for a while, and I own the Airbus X (way to complicated for the average flight simmer) which is why I don't fly it. So this release has me very eager and I am in great anticipation for the FSX release. Many kudos to the PA team for an fantastic looking model. I only hope she flies as good as she looks.

Kyle Schurb · Post by **Kyle Schurb** » 17 Oct 2014, 14:05

Silverwings wrote:The FS9 vesrion will not work in FSX period.

Incorrect.